Milwaukee 1-3/4 in. Big Hawg Carbide Hole Saw
$23.97
The BIG HAWG with Carbide Teeth hole saw delivers 50X life and 10X larger carbide teeth for heavy duty wood and abrasive material applications.
In stock
Description
Milwaukee BIG HAWG with carbide teeth is first-to-market in providing extreme life and durability in both nail-embedded wood and abrasive material applications. Utilizing advanced carbide technology, the new BIG HAWG with carbide teeth gives users 50-times life in demanding applications with the ability to cut 1000 plus more nails. 10-times larger carbide teeth rip through materials 5 times faster while deeper slots make for fast and easy plug removal. BIG HAWG with carbide teeth allows users to cut through the toughest materials including nails, cement board, shingles, plaster and stucco.
- 10-times larger carbide teeth
- 3-tooth design for fast aggressive cuts
- Carbide tipped multi-material pilot bit for increased material versatility
- Thicker backer for extreme life in demanding applications
- Optimized slot design for fast plug removal
- Enlarged braze surface for stronger bond to the carbide teeth
- Cuts wood, nails, shingles, cement board, plaster and more
- Includes: one 1-3/4 in. BIG HAWG with carbide teeth
Additional information
| Weight | .35 lbs |
|---|---|
| Dimensions | 3.07 × 3.78 × 5.51 in |
| Arbor Size | 0 |
| Arbor included | No |
| Bit Diameter | 3/8 in |
| Bit Length (in.) | 3.5 |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 2.43 |
| Hole Saw Diameter (in) | 1-3/4" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | 1/2 In. |
| Model | 49-56-9205 |
| Pilot Bit Included | No |
| Teeth Per Inch | 1 |
Reviews (70)
70 reviews for Milwaukee 1-3/4 in. Big Hawg Carbide Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# 48-20-8852
Drill Bits
Model# 49-56-7010
Drill Bits
Model# DW2162
Drill Bits
Model# DW2542
Drill Bits
Model# 48-25-2252
Drill Bits
Milwaukee 1/4 in. X 3-1/2 in. Pilot Drill Bit For Hole Saw Arbor
Model# 49-56-8010
Drill Bits
Model# 48-25-2122
Drill Bits
Model# DW2735P
Kirstin Fahey (verified owner) –
Works good. I drill a lot of holes and so far I’ve had no issues
Adolf Ebert (verified owner) –
Cuts through Hardi Board very well, doesn’t cut OSB as well as wood hole saw.
Annette Hills (verified owner) –
Cuts through stucco like butter….with a standard drill!
Rosamond Keeling (verified owner) –
This Big Hawk Carbide Saw does what they say goes right through the material you are drilling in with less binding up or pushing on it
Donna Murazik (verified owner) –
Delicately cut through vinyl flooring and powered through 1 ½” subflooring plywood.
Florencio Krajcik (verified owner) –
Very good bit
Kennith Morissette (verified owner) –
This hole cutter cleans out very easily.
Timothy Crona (verified owner) –
I have a couple of the other sizes of these hole saws, and this Milwaukee 2-3/4 in. Big Hawg Carbide Hole Saw is one tough carbide toothed hole saw! These things are built Milwaukee tough, not like those cheap imported tin-metal hole saws you see everywhere for dirt cheap prices. These are great for contractors or the casual DYI homeowner. You will need the separate mandrel if you don’t already have it, but it fits all these Big Hawg saws. It too is one serious piece of equipment and well worth the cost. I love Milwaukee tools, and own many of their products, and trust them to always make tools that last many years. Thanks Milwaukee, and Home Depot!
Katrine O’Connell (verified owner) –
Works great and cuts fast.
Phoebe Farrell (verified owner) –
Very good, for 6” metal pipes.
Mariano Ondricka (verified owner) –
Absolutely rips thru wood!
Janie Schroeder (verified owner) –
I waited a while to write a review on this hole saw from Milwaukee because I wanted to see the results of it in real world testing. I install electrical conduit and use hole saws everyday. I used the 3″ carbide toothed saw to cut through metal, plywood, 2×8’s and such. The real test was to make multiple cuts one after the other through a commercial roof, rubber membrane, tar, steel , wood and foam insulation. The big hawg hole saw never slowed Down even with a 12″ extension attached to it. I don’t have a picture of it because it would not do it justice. I will be getting more of them I the future.
Marge Stamm (verified owner) –
First off, this hole saw is not for finesse work on anything. It is a hawg when busting through wood and it does so in very quick and efficient manner. It is very deep and could probably easily put a hole through 4″ thick stock without a problem. The design is also intended to cut through nails in wood without even noticing. I did not drill any beams with nails, but the board I put a hole in didn’t stand a chance.If you need a quick hole through wood, with or without nails, this is the ticket. It comes in other sizes, I got the 3 5/8 because that is what I use the most. Needs a Milwaukee quick connect shank, and due to the depth of the hole saw, you will need a longer pilot bit in the shank. Excellent quality for the price, as is usual.
Marco Rempel (verified owner) –
Cuts through fiber cement siding like a dream!
Kathryn Reichel (verified owner) –
Better than expected , did the job other bits wouldn’t
Ara Balistreri (verified owner) –
Much needed addition for plumbing large diameter sewage pipes. Heavy but durable. Worked great with Milwaukee Super Hawg.
Gardner Kautzer (verified owner) –
The Big Hawg is becoming the Go To Hole Saw. As my others wear-out i will be replacing them with the Hawg. It works great in plaster ceilings when cutting in lights and boxes. Need a longer pilot bit, and a little pricey. Hopefully will last much longer than traditional Hole Saws.
Marietta Metz (verified owner) –
Used it for stucco for range hood vent. It worked well
Salvatore Little (verified owner) –
These new Milwaukee Big Hawg hole saws are nasty they will drill thru wood like butter, I tried mine out on a 2×4 and it went thru it in just a few seconds. I didn’t know what to expect with it only having 3 teeth but let me tell you it is a flat out monster! The carbide teeth on it are razor sharp and will make quick work of any job and the large gullets make ejecting chips faster and also when you go to pull the plug you drilled out the large gullets make it super easy! This only comes with the hole saw, you have to buy the arbor separate and I know they recommend arbor Model # 49-56-9305, however they did not have this in my store and I was eager to try this hole saw so I bought arbor model number Model # 49-56-7250 and it works great with the Big Hawg hole saw, I really like how it is a tool free removable arbor that is a great feature. I definitely recommend these hole saws they are monsters!
Johnny Paucek (verified owner) –
This is another of those products that takes a SawzAll and a half stick of dynamite to get it out of the packaging, which is really, really annoying (I dinged it one star for that). Other than that, the carbide tips are thick and sharp and can probably be sharpened several times if one had the capability of doing that. It takes a standard arbor, which anyone who regularly uses hole saws should have (as opposed to a Freud/Diablo hole saw I recently purchased, which only accepts a Freud arbor), and it is fairly deep–a full two inches even after accounting for the arbor protrusion. If you are new to large hole saws and have a powerful 1/2″ drill (all of the arbors for this size hole saw require a 1/2″ drill, unless you can find an adapter somewhere), start your cut slowly to minimize binding or you are likely to end up with a sprained wrist. Once the teeth are buried in the hole, binding is less likely as long as you keep the saw straight.