Milwaukee 2-9/16 in. Big Hawg Carbide Hole Saw
$30.97
Complete your drilling application easily with the selection of this excellent Milwaukee Big Hawg Carbide Hole Saw. Offers long-lasting durability.
In stock
Description
Milwaukee BIG HAWG with carbide teeth is first-to-market in providing extreme life and durability in both nail-embedded wood and abrasive material applications. Utilizing advanced carbide technology, the new BIG HAWG with carbide teeth gives users 50-times life in demanding applications with the ability to cut 1000 plus more nails. 10-times larger carbide teeth rip through materials 5 times faster while deeper slots make for fast and easy plug removal. BIG HAWG with carbide teeth allows users to cut through the toughest materials including nails, cement board, shingles, plaster and stucco.
- 10-times larger carbide teeth
- 3-tooth design for fast aggressive cuts
- Carbide tipped multi-material pilot bit for increased material versatility
- Thicker backer for extreme life in demanding applications
- Optimized slot design for fast plug removal
- Enlarged braze surface for stronger bond to the carbide teeth
- Cuts wood, nails, shingles, cement board, plaster and more
- Includes: one 2-9/16 in. BIG HAWG with carbide teeth
Additional information
| Weight | .64 lbs |
|---|---|
| Dimensions | 2.93 × 4.08 × 6.43 in |
| Arbor Size | 0 |
| Arbor included | No |
| Bit Diameter | 3/8 in |
| Bit Length (in.) | 3.5 |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 2.43 |
| Hole Saw Diameter (in) | 2-9/16" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | 1/2 In. |
| Model | 49-56-9220 |
| Pilot Bit Included | No |
| Teeth Per Inch | 1 |
Reviews (70)
70 reviews for Milwaukee 2-9/16 in. Big Hawg Carbide Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# 48-25-2122
Drill Bits
Model# DW2535
Drill Bits
Model# DW2542
Drill Bits
Model# 48-20-8852
Drill Bits
Bosch 20 in. x 3 in. Hammer Steel 1-1/8 in. Hex Chisel for Demolition Hammer
Model# HS2164
Drill Bits
Model# DW2735P
Drill Bits
Model# FB-003
Drill Bits
Model# 48-32-2100
Reina Mohr (verified owner) –
This Big Hawk Carbide Saw does what they say goes right through the material you are drilling in with less binding up or pushing on it
Stacy Schiller (verified owner) –
Great product! Not some lightweight whole saw.
Arnold Hudson (verified owner) –
These hole saws work great. I have already ordered more.
Beatrice Gusikowski (verified owner) –
A very good bit for old thick wood
Lisa Lakin (verified owner) –
It is a great drill bit
Conrad Hessel (verified owner) –
While traditional bi-metal hole saws still have their place in certain applications, for rough holes in framing members – and especially anywhere that nails might be encountered – 3-tooth carbide hole saws such as these Milwaukee Big Hawgs, can’t be beat.As a residential electrical contractor, boring holes in wood framing members is something I do most days – some days, much of the day. For many years, self-feed bits were the only real option to the professional for larger holes. While they also provide for rapid boring, one good nail strike and they require costly sharpening. They also require a lot of drill. The Big Hawgs, were they are only cutting the kerf of the saw out, require a lot less drill, making them ideal, with today’s cordless job.This 3-5/8″ model is a 6-second hole through 2x pine framing, with either drill pictured. In my video there, I am cutting through 3 12d common framing nails, which this thing just eats up. Just ease off a little bit, and let the carbide teeth chip away at the nail. That hole was still only roughly a 10-second hole. No discernible damage or wear was evident after doing this multiple times. Again, these are designed for rapid large holes through framing and other construction materials, and excel at it. If you require a more refined hole, or are drilling through thin, brittle material – such as vinyl siding – a traditional hole saw is what you seek.
Jeramie Blanda (verified owner) –
Worked great for drilling extra bird block holes!
Elenor Goodwin (verified owner) –
Delicately cut through vinyl flooring and powered through 1 ½” subflooring plywood.
Richie Brown (verified owner) –
Used it for stucco for range hood vent. It worked well
Ericka Upton (verified owner) –
just used it & it work fine
Lonnie Marks (verified owner) –
Used this to cut holes in “support wood” over a drop ceiling for led lights. Worked great and made the task go quickly. I have 25 more holes to do so that was a great tool for this job…
Oda Bernhard (verified owner) –
I have been a big fan of Milwaukee for a long, long time. So I have been a bit dismayed that they moved their production overseas. A couple of recent tools have been short of my expectations. But, overall they do still seem to distribute a great product. This “Hole Saw”, is reminiscent of their production standards of awhile back. Mind you, they still produce good stuff. Their product control standards are in place. But I digress, this “Hole Saw” weighs in at a whopping 2 Lbs packaged, this is a saw not for a small drill, so again my Milwaukee Hawg angled drill will power this saw through walls. Solid and impressive Hole Saw, still a fan.
Mariane Howe (verified owner) –
It works great!!!
Jackie Nolan (verified owner) –
This hole cutter cleans out very easily.
Ellen Ortiz (verified owner) –
I got this to drill a hole through stucco. It wasn’t easy, but this got the job done. It helped to spray some water in there while it was attempting to dig into that plaster.
Luna Heaney (verified owner) –
Yes I have tried it On wood and work great, But still gotta try it on stuchell in my top a job there stuchell did I have to go through to make holes and are the thing is I wish they would make it on size 8 and a quarter
Sydni Ankunding (verified owner) –
I waited a while to write a review on this hole saw from Milwaukee because I wanted to see the results of it in real world testing. I install electrical conduit and use hole saws everyday. I used the 3″ carbide toothed saw to cut through metal, plywood, 2×8’s and such. The real test was to make multiple cuts one after the other through a commercial roof, rubber membrane, tar, steel , wood and foam insulation. The big hawg hole saw never slowed Down even with a 12″ extension attached to it. I don’t have a picture of it because it would not do it justice. I will be getting more of them I the future.
Abner Hamill (verified owner) –
This is another of those products that takes a SawzAll and a half stick of dynamite to get it out of the packaging, which is really, really annoying (I dinged it one star for that). Other than that, the carbide tips are thick and sharp and can probably be sharpened several times if one had the capability of doing that. It takes a standard arbor, which anyone who regularly uses hole saws should have (as opposed to a Freud/Diablo hole saw I recently purchased, which only accepts a Freud arbor), and it is fairly deep–a full two inches even after accounting for the arbor protrusion. If you are new to large hole saws and have a powerful 1/2″ drill (all of the arbors for this size hole saw require a 1/2″ drill, unless you can find an adapter somewhere), start your cut slowly to minimize binding or you are likely to end up with a sprained wrist. Once the teeth are buried in the hole, binding is less likely as long as you keep the saw straight.
Dwight Satterfield (verified owner) –
Very expensive but on the first 9 holes thru plaster and lath it has held up.
Guido Emard (verified owner) –
Milwaukee never lets me down! These are amazing hole saws that pretty much rips through any material yet leaves a clean and perfectly honed hole. They aren’t overly heavy and works well with their m12 drills. My only wish is that they come in a bundle with several sizes and a kit that holds them all together. Overall these are by far some of the best hole saws you can buy.