Milwaukee 2-3/4 in. Big Hawg Carbide Hole Saw
$35.97
The BIG HAWG with Carbide Teeth hole saw delivers 50X life and 10X larger carbide teeth for heavy duty wood and abrasive material applications.
In stock
Description
The MILWAUKEE BIG HAWG with Carbide Teeth is the best hole saw solution for nail-embedded wood and abrasive material applications. This first-to-market hole saw offers extreme life utilizing advanced carbide technology. The BIG HAWG gives users 50X more life in demanding applications with the ability to cut 1000+ more nails. The heavy duty hole saw has 10X larger carbide teeth that rip through materials five times faster. Deeper slots allow for fast and easy plug removal. The BIG HAWG hole saw is the best solution for cutting through the toughest materials, including nails, cement board, shingles, plaster and stucco.
- 10X larger carbide teeth
- 3 tooth design for fast aggressive cuts
- Carbide tipped multi-material pilot bit for increased material versatility
- Thicker backer for extreme life in demanding applications
- Optimized slot design for fast plug removal
- Enlarged braze surface for stronger bond to the carbide teeth
- Cuts wood, nails, shingles, cement board, plaster and more
- Includes: (1) 2-3/4 in. BIG HAWG with carbide teeth
Additional information
| Weight | .72 lbs |
|---|---|
| Dimensions | 2.93 × 4.08 × 6.43 in |
| Arbor included | No |
| Bit Diameter | 3/8 in |
| Bit Length (in.) | 3.5 |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 2.43 |
| Hole Saw Diameter (in) | 2-3/4" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | 1/2 In. |
| Model | 49-56-9225 |
| Pilot Bit Included | No |
Reviews (70)
70 reviews for Milwaukee 2-3/4 in. Big Hawg Carbide Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# 49-56-0247
Drill Bits
Milwaukee 18 in. x 7/16 in. QUIK-LOK Universal Extension Bit
Model# 48-28-1050
Drill Bits
Model# 282303
Drill Bits
Model# DW2535
Drill Bits
Model# 48-28-1010
Drill Bits
Bosch Carbide-Tipped Rotary SDS-Plus Hammer Bit Set (7-Piece)
Model# HCK001
Drill Bits
Model# DW2045 G
Drill Bits
Model# DW2162
Jerrold Gutkowski (verified owner) –
Milwaukee tools just can’t be beat. This Big Hawk Carbide Hole Saw did the trick in cutting holes through the framing studs making it easier to cut holes for the new electrical and cable lines in a new structure. The cuts are fast and smooth. It does take someone with good strength to use it and after one attempt I turned it over to one of the guys to use (I am a small woman) and I watched. The electrician loved it and plans to replace his with this one. I haven’t used it on anything that had nails to cut through yet, but based on its performance on the 2″ studs, I am certain it will work well.
Harmony Koch (verified owner) –
Cuts through Hardi Board very well, doesn’t cut OSB as well as wood hole saw.
Payton Funk (verified owner) –
Yea Baby – That’s what I’m talking about! This Big Hawg Carbide Hole Saw can cut some holes! I have to say I was skeptical at first just by looking at the design – but the first hole made me a believer. I have a bunch of hole saws – the ones with the finer teeth – but on larger holes they just seem to take forever and clearing them is a pain. I cannot say enough about how impressed I was – and I have cut some holes in my day. At first I was going to chuck this up in the Milwaukee Hole Hawg – a beast that you really need to be careful with – but decided to use my 18 volt Milwaukee drill instead. Watch the attached video and you be the judge. As for me, I will be using the Big Dog Hawgs going forward. Thank you Milwaukee!
Libby Hand (verified owner) –
Better than expected , did the job other bits wouldn’t
Jamaal Stark (verified owner) –
As expected- Great Milwaukee product.
Florence Hand (verified owner) –
Works great and cuts fast.
Ceasar O’Hara (verified owner) –
Works good. I drill a lot of holes and so far I’ve had no issues
Myriam Hoppe (verified owner) –
Very good bit
Armani Buckridge (verified owner) –
As a plumber, I carry alot of wood boring bits. Milwaukee hole saw bits never let me down. Last a long time too. These style bits are awesome
Antone Spencer (verified owner) –
Very expensive but on the first 9 holes thru plaster and lath it has held up.
Alta Upton (verified owner) –
It’s the best in the market I love it but this time it only last me 2 days I don’t know why….
Gus Volkman (verified owner) –
I waited a while to write a review on this hole saw from Milwaukee because I wanted to see the results of it in real world testing. I install electrical conduit and use hole saws everyday. I used the 3″ carbide toothed saw to cut through metal, plywood, 2×8’s and such. The real test was to make multiple cuts one after the other through a commercial roof, rubber membrane, tar, steel , wood and foam insulation. The big hawg hole saw never slowed Down even with a 12″ extension attached to it. I don’t have a picture of it because it would not do it justice. I will be getting more of them I the future.
Santos Ebert (verified owner) –
I love all of the Milwaukee products and the big hawg carbide teeth did not disappoint. Was able to cut off nails easily and no problems at all. When I was cutting out holes I did not notice and jagged edges. I had to make a cut into plywood and this went into the wood fairly quickly. Using my drill the saw felt very solid with hardly any vibration. Very high quality and a real time saver.
Ricardo Willms (verified owner) –
As a plumber, when i rough in a house I need tools that are going to work day after day that work well and without breaking down. For years I’ve used Big Hawg holesaws and I have never been let down. In rough plumbing there are always hidden things that must be drilled through whether it’s drywall screws that you didn’t see or a jumble of nails that simply can’t be removed or even piles of old cement plaster that are inside the walls or joists. I grab the BigHawg holesaw and go. It is of superior quality. There is no other holesaw on the market made to this high standard. As soon as I drill a few holes in “impossible” materials the other trades on the job want to know what I’m using and where they can get a set. Get a set, you won’t be disappointed!!!
Nico Quigley (verified owner) –
Note for purchase, you need a Milwaukee 49-56-9305 arbor which is sold separately. Milwaukee’s saw blades have always held up for me longer than other brands. I know that they will hold up well and I won’t have an issue with it. This blade is no exception. I was able to easily cut through 2 different materials, one that I knew was littered with nails. This didn’t burn out and I’m confident will do the job on many more projects.
Fletcher Hudson (verified owner) –
It’s a good tool
Hellen Schumm (verified owner) –
Much needed addition for plumbing large diameter sewage pipes. Heavy but durable. Worked great with Milwaukee Super Hawg.
Ellsworth Reinger (verified owner) –
This is another of those products that takes a SawzAll and a half stick of dynamite to get it out of the packaging, which is really, really annoying (I dinged it one star for that). Other than that, the carbide tips are thick and sharp and can probably be sharpened several times if one had the capability of doing that. It takes a standard arbor, which anyone who regularly uses hole saws should have (as opposed to a Freud/Diablo hole saw I recently purchased, which only accepts a Freud arbor), and it is fairly deep–a full two inches even after accounting for the arbor protrusion. If you are new to large hole saws and have a powerful 1/2″ drill (all of the arbors for this size hole saw require a 1/2″ drill, unless you can find an adapter somewhere), start your cut slowly to minimize binding or you are likely to end up with a sprained wrist. Once the teeth are buried in the hole, binding is less likely as long as you keep the saw straight.
Nils Eichmann (verified owner) –
I have been a big fan of Milwaukee for a long, long time. So I have been a bit dismayed that they moved their production overseas. A couple of recent tools have been short of my expectations. But, overall they do still seem to distribute a great product. This “Hole Saw”, is reminiscent of their production standards of awhile back. Mind you, they still produce good stuff. Their product control standards are in place. But I digress, this “Hole Saw” weighs in at a whopping 2 Lbs packaged, this is a saw not for a small drill, so again my Milwaukee Hawg angled drill will power this saw through walls. Solid and impressive Hole Saw, still a fan.
Burnice O’Reilly (verified owner) –
These are the best bits on the market