Milwaukee 3-5/8 in. Big Hawg Carbide Hole Saw
$41.97
This excellent Milwaukee Big Hawg Carbide Hole Saw provides extreme life and durability in both nail-embedded wood and abrasive material applications.
In stock
Description
Milwaukee BIG HAWG with carbide teeth is first-to-market in providing extreme life and durability in both nail-embedded wood and abrasive material applications. Utilizing advanced carbide technology, the new BIG HAWG with carbide teeth gives users 50-times life in demanding applications with the ability to cut 1000 plus more nails. 10-times larger carbide teeth rip through materials 5 times faster while deeper slots make for fast and easy plug removal. BIG HAWG with carbide teeth allows users to cut through the toughest materials including nails, cement board, shingles, plaster and stucco.
- 10-times larger carbide teeth
- 3-tooth design for fast aggressive cuts
- Carbide tipped multi-material pilot bit for increased material versatility
- Thicker backer for extreme life in demanding applications
- Optimized slot design for fast plug removal
- Enlarged braze surface for stronger bond to the carbide teeth
- Cuts wood, nails, shingles, cement board, plaster and more
- Includes: one 3-5/8 in. BIG HAWG with carbide teeth
Additional information
| Weight | 1.14 lbs |
|---|---|
| Dimensions | 2.93 × 5.15 × 6.65 in |
| Arbor Size | 0 |
| Arbor included | No |
| Bit Diameter | 3/8 in |
| Bit Length (in.) | 3.5 |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 2.43 |
| Hole Saw Diameter (in) | 3-5/8" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | 1/2 In. |
| Model | 49-56-9240 |
| Pilot Bit Included | No |
| Teeth Per Inch | 1 |
Reviews (70)
70 reviews for Milwaukee 3-5/8 in. Big Hawg Carbide Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# FB-005
Drill Bits
Milwaukee 18 in. x 7/16 in. QUIK-LOK Universal Extension Bit
Model# 48-28-1050
Drill Bits
Model# FB-015
Drill Bits
Model# DW2542
Drill Bits
Model# FB-007
Drill Bits
Model# DW2535
Drill Bits
Model# DW2046 G
Drill Bits
Bosch 20 in. x 3 in. Hammer Steel 1-1/8 in. Hex Chisel for Demolition Hammer
Model# HS2164
Jackie O’Reilly (verified owner) –
Great product! Not some lightweight whole saw.
Judd Bahringer (verified owner) –
Cuts through stucco like butter….with a standard drill!
Judson Huel (verified owner) –
I waited a while to write a review on this hole saw from Milwaukee because I wanted to see the results of it in real world testing. I install electrical conduit and use hole saws everyday. I used the 3″ carbide toothed saw to cut through metal, plywood, 2×8’s and such. The real test was to make multiple cuts one after the other through a commercial roof, rubber membrane, tar, steel , wood and foam insulation. The big hawg hole saw never slowed Down even with a 12″ extension attached to it. I don’t have a picture of it because it would not do it justice. I will be getting more of them I the future.
Kasandra Schultz (verified owner) –
I got this to drill a hole through stucco. It wasn’t easy, but this got the job done. It helped to spray some water in there while it was attempting to dig into that plaster.
Russel Hahn (verified owner) –
It is a great drill bit
Shania Cummings (verified owner) –
Worked flawlessly on my plaster ceilings.
Lavinia Fahey (verified owner) –
I have been a big fan of Milwaukee for a long, long time. So I have been a bit dismayed that they moved their production overseas. A couple of recent tools have been short of my expectations. But, overall they do still seem to distribute a great product. This “Hole Saw”, is reminiscent of their production standards of awhile back. Mind you, they still produce good stuff. Their product control standards are in place. But I digress, this “Hole Saw” weighs in at a whopping 2 Lbs packaged, this is a saw not for a small drill, so again my Milwaukee Hawg angled drill will power this saw through walls. Solid and impressive Hole Saw, still a fan.
Lambert Corkery (verified owner) –
These hole saws work great. I have already ordered more.
Cynthia Powlowski (verified owner) –
While traditional bi-metal hole saws still have their place in certain applications, for rough holes in framing members – and especially anywhere that nails might be encountered – 3-tooth carbide hole saws such as these Milwaukee Big Hawgs, can’t be beat.As a residential electrical contractor, boring holes in wood framing members is something I do most days – some days, much of the day. For many years, self-feed bits were the only real option to the professional for larger holes. While they also provide for rapid boring, one good nail strike and they require costly sharpening. They also require a lot of drill. The Big Hawgs, were they are only cutting the kerf of the saw out, require a lot less drill, making them ideal, with today’s cordless job.This 3-5/8″ model is a 6-second hole through 2x pine framing, with either drill pictured. In my video there, I am cutting through 3 12d common framing nails, which this thing just eats up. Just ease off a little bit, and let the carbide teeth chip away at the nail. That hole was still only roughly a 10-second hole. No discernible damage or wear was evident after doing this multiple times. Again, these are designed for rapid large holes through framing and other construction materials, and excel at it. If you require a more refined hole, or are drilling through thin, brittle material – such as vinyl siding – a traditional hole saw is what you seek.
Edna Stamm (verified owner) –
These new Milwaukee Big Hawg hole saws are nasty they will drill thru wood like butter, I tried mine out on a 2×4 and it went thru it in just a few seconds. I didn’t know what to expect with it only having 3 teeth but let me tell you it is a flat out monster! The carbide teeth on it are razor sharp and will make quick work of any job and the large gullets make ejecting chips faster and also when you go to pull the plug you drilled out the large gullets make it super easy! This only comes with the hole saw, you have to buy the arbor separate and I know they recommend arbor Model # 49-56-9305, however they did not have this in my store and I was eager to try this hole saw so I bought arbor model number Model # 49-56-7250 and it works great with the Big Hawg hole saw, I really like how it is a tool free removable arbor that is a great feature. I definitely recommend these hole saws they are monsters!
Mathias Schroeder (verified owner) –
This Big Hawk Carbide Saw does what they say goes right through the material you are drilling in with less binding up or pushing on it
Doug Thiel (verified owner) –
It beutifuol
Ed Zieme (verified owner) –
I needed this holesaw cup for installing coach lights in cement board… it works like a champ!
Frederique Ruecker (verified owner) –
Absolutely rips thru wood!
Nicola Bartell (verified owner) –
While traditional bi-metal hole saws still have their place in certain applications, for rough holes in framing members 3-tooth carbide hole saws, such as these Milwaukee Big Hawgs, can’t be beat.As a residential electrical contractor, boring holes in wood framing members is something I do most days – some days, much of the day. For many years, self-feed bits were the only real option to the professional for larger holes. While they also provide for rapid boring, one good nail strike and they require costly sharpening. They also require a lot of drill. The Big Hawgs, were they are only cutting the kerf of the saw out, require a lot less drill, making them ideal, with today’s cordless job. This 5-1/4″ model is roughly an 8-second hole through 2x pine framing, in my M18 Hole Hawg.Again, these are designed for rapid large holes through framing and other construction materials, and excel at it. If you require a more refined hole, or are drilling through thin, brittle material – such as vinyl siding – a traditional hole saw is what you seek.
Kenyon Muller (verified owner) –
Cuts through fiber cement siding like a dream!
Tristian Swift (verified owner) –
Delicately cut through vinyl flooring and powered through 1 ½” subflooring plywood.
Pat Gaylord (verified owner) –
This hole cutter cleans out very easily.
Earl Hand (verified owner) –
Milwaukee tools just can’t be beat. This Big Hawk Carbide Hole Saw did the trick in cutting holes through the framing studs making it easier to cut holes for the new electrical and cable lines in a new structure. The cuts are fast and smooth. It does take someone with good strength to use it and after one attempt I turned it over to one of the guys to use (I am a small woman) and I watched. The electrician loved it and plans to replace his with this one. I haven’t used it on anything that had nails to cut through yet, but based on its performance on the 2″ studs, I am certain it will work well.
Alford Gaylord (verified owner) –
First off, this hole saw is not for finesse work on anything. It is a hawg when busting through wood and it does so in very quick and efficient manner. It is very deep and could probably easily put a hole through 4″ thick stock without a problem. The design is also intended to cut through nails in wood without even noticing. I did not drill any beams with nails, but the board I put a hole in didn’t stand a chance.If you need a quick hole through wood, with or without nails, this is the ticket. It comes in other sizes, I got the 3 5/8 because that is what I use the most. Needs a Milwaukee quick connect shank, and due to the depth of the hole saw, you will need a longer pilot bit in the shank. Excellent quality for the price, as is usual.