The MILWAUKEE BIG HAWG with Carbide Teeth is the best hole saw solution for nail-embedded wood and abrasive material applications. This first-to-market hole saw offers extreme life utilizing advanced carbide technology. The BIG HAWG gives users 50X more life in demanding applications with the ability to cut 1000+ more nails. The heavy duty hole saw has 10X larger carbide teeth that rip through materials five times faster. Deeper slots allow for fast and easy plug removal. The BIG HAWG hole saw is the best solution for cutting through the toughest materials, including nails, cement board, shingles, plaster and stucco.
- 10X larger carbide teeth
- 3 tooth design for fast aggressive cuts
- Carbide tipped multi-material pilot bit for increased material versatility
- Thicker backer for extreme life in demanding applications
- Optimized slot design for fast plug removal
- Enlarged braze surface for stronger bond to the carbide teeth
- Cuts wood, nails, shingles, cement board, plaster and more
- Includes: (1) 4 in. BIG HAWG with carbide teeth
Estel Abernathy (verified owner) –
I got this to drill a hole through stucco. It wasn’t easy, but this got the job done. It helped to spray some water in there while it was attempting to dig into that plaster.
Domenick Johnson (verified owner) –
Milwaukee tools just can’t be beat. This Big Hawk Carbide Hole Saw did the trick in cutting holes through the framing studs making it easier to cut holes for the new electrical and cable lines in a new structure. The cuts are fast and smooth. It does take someone with good strength to use it and after one attempt I turned it over to one of the guys to use (I am a small woman) and I watched. The electrician loved it and plans to replace his with this one. I haven’t used it on anything that had nails to cut through yet, but based on its performance on the 2″ studs, I am certain it will work well.
Marty Kohler (verified owner) –
This hole cutter cleans out very easily.
Terrell Stamm (verified owner) –
These new Milwaukee Big Hawg hole saws are nasty they will drill thru wood like butter, I tried mine out on a 2×4 and it went thru it in just a few seconds. I didn’t know what to expect with it only having 3 teeth but let me tell you it is a flat out monster! The carbide teeth on it are razor sharp and will make quick work of any job and the large gullets make ejecting chips faster and also when you go to pull the plug you drilled out the large gullets make it super easy! This only comes with the hole saw, you have to buy the arbor separate and I know they recommend arbor Model # 49-56-9305, however they did not have this in my store and I was eager to try this hole saw so I bought arbor model number Model # 49-56-7250 and it works great with the Big Hawg hole saw, I really like how it is a tool free removable arbor that is a great feature. I definitely recommend these hole saws they are monsters!
Eli Hoppe (verified owner) –
Great product! Not some lightweight whole saw.
Delphine Turner (verified owner) –
Cuts through Hardi Board very well, doesn’t cut OSB as well as wood hole saw.
Enola Beer (verified owner) –
Bery good
Valentin Bogisich (verified owner) –
Yes I have tried it On wood and work great, But still gotta try it on stuchell in my top a job there stuchell did I have to go through to make holes and are the thing is I wish they would make it on size 8 and a quarter
Miguel Dibbert (verified owner) –
The Big Hawg is becoming the Go To Hole Saw. As my others wear-out i will be replacing them with the Hawg. It works great in plaster ceilings when cutting in lights and boxes. Need a longer pilot bit, and a little pricey. Hopefully will last much longer than traditional Hole Saws.
Vinnie Gutmann (verified owner) –
Works great and cuts fast.
Caroline Rosenbaum (verified owner) –
Absolutely rips thru wood!
Karelle Cartwright (verified owner) –
Worked great for drilling extra bird block holes!
Cristal Ernser (verified owner) –
If you need to put vent holes through Hardi or similar siding, this is your tool. The bimetalic drills will wear out after two or three holes. This thing cuts fast and just keeps cutting.
Kira Kuvalis (verified owner) –
While traditional bi-metal hole saws still have their place in certain applications, for rough holes in framing members 3-tooth carbide hole saws, such as these Milwaukee Big Hawgs, can’t be beat.As a residential electrical contractor, boring holes in wood framing members is something I do most days – some days, much of the day. For many years, self-feed bits were the only real option to the professional for larger holes. While they also provide for rapid boring, one good nail strike and they require costly sharpening. They also require a lot of drill. The Big Hawgs, were they are only cutting the kerf of the saw out, require a lot less drill, making them ideal, with today’s cordless job. This 5-1/4″ model is roughly an 8-second hole through 2x pine framing, in my M18 Hole Hawg.Again, these are designed for rapid large holes through framing and other construction materials, and excel at it. If you require a more refined hole, or are drilling through thin, brittle material – such as vinyl siding – a traditional hole saw is what you seek.
Hilma King (verified owner) –
I needed this holesaw cup for installing coach lights in cement board… it works like a champ!
Gerhard Toy (verified owner) –
It works great!!!
Bud King (verified owner) –
Used this to cut holes in “support wood” over a drop ceiling for led lights. Worked great and made the task go quickly. I have 25 more holes to do so that was a great tool for this job…
Ulises Walsh (verified owner) –
this hole saw does a great job. Cuts through plaster like butter
Joy Emard (verified owner) –
It’s the best in the market I love it but this time it only last me 2 days I don’t know why….
Ulises Wintheiser (verified owner) –
Note for purchase, you need a Milwaukee 49-56-9305 arbor which is sold separately. Milwaukee’s saw blades have always held up for me longer than other brands. I know that they will hold up well and I won’t have an issue with it. This blade is no exception. I was able to easily cut through 2 different materials, one that I knew was littered with nails. This didn’t burn out and I’m confident will do the job on many more projects.