Milwaukee 1-3/8 in. Hole Dozer Bi-Metal Hole Saw
$10.98
The Milwaukee Hole Dozer Hole Saw features Rip guard, the strongest tooth form in the industry, backed by the Rip guard limited lifetime tooth break warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8% cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. The Hole Dozer includes Plug Jack, an all access slot design that allows for full access during plug removal. The Plug Jack gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack increases productivity and eliminates wasted downtime between holes. For fast, tool-free change-outs, use Milwaukee’s universal Quick-Change Arbors. 49-56-7210, 49-56-7240, 49-56-7250 and 49-56-9100.
In stock
Description
The Milwaukee Hole Dozer Hole Saw features Rip guard, the strongest tooth form in the industry, backed by the Rip guard limited lifetime tooth break warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8% cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. The Hole Dozer includes Plug Jack, an all access slot design that allows for full access during plug removal. The Plug Jack gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack increases productivity and eliminates wasted downtime between holes. For fast, tool-free change-outs, use Milwaukee’s universal Quick-Change Arbors. 49-56-7210, 49-56-7240, 49-56-7250 and 49-56-9100.
- Rip guard, the strongest tooth form in the industry
- Rip guard limited lifetime tooth break warranty
- Plug jack, an all access slot design for fast plug removal
- Bi-metal construction with 8% cobalt for increased wear resistance
Additional information
| Weight | 0.55 lbs |
|---|---|
| Dimensions | 1.38 × 2.13 × 1.38 in |
| Arbor included | No |
| Bit Diameter | 1-3/8 in |
| Bit Length (in.) | 1.625 |
| Bit Material | Bi-Metal |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 1.8 |
| Hole Saw Diameter (in) | 1-3/8" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | 1/2 In. |
| Model | 49-56-9615 |
| Pilot Bit Included | No |
| Shank Style | Hex |
| Tools Product Type | Power Tool |
Reviews (65)
65 reviews for Milwaukee 1-3/8 in. Hole Dozer Bi-Metal Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# DW2735P
Drill Bits
Model# 48-28-1010
Drill Bits
Model# 48-20-8856
Drill Bits
Model# DW2046 G
Drill Bits
Bosch 20 in. Hammer Steel 1-1/8 in. Hex Moil Point Chisel for General Chipping Work
Model# HS2161
Drill Bits
Model# DW2045 G
Drill Bits
Milwaukee 1/4 in. X 3-1/2 in. Pilot Drill Bit For Hole Saw Arbor
Model# 49-56-8010
Drill Bits
Model# FB-007
Lorenza Kulas (verified owner) –
Perfect holes for recessed lighting in my ceiling. Keep in mind if you’re extending existing holes, the center piece won’t have anything to grab on to, so you’d have to use some kind of wooden template to keep it from moving until the saw teeth grab into the drywall.
Garnet Hessel (verified owner) –
As expected. No issues
Nikolas Johnston (verified owner) –
Lasted 3 minutes with 16 ga sheet metal.
Geoffrey Koch (verified owner) –
Excellent, well designed hole saw. It is far easier to remove the cut materials from this hole saw than with the design from most other manufacturers. It is a long life hole saw as well.
Peyton Tremblay (verified owner) –
Worked just fine easy to use drilled hole with no problems.
Dwight Konopelski (verified owner) –
Good and sharp. Got the job done efficiently.
Nichole Hauck (verified owner) –
Did the job but whin I was done there was nothing done. Teeth wore off fast.
Bertram Schaefer (verified owner) –
Strong sharp and sturdy
River Gusikowski (verified owner) –
I purchased this hole saw to use for cutting holes in steel and it worked flawlessly. So far I have bored six 2″ diameter holes in 1/8″ thick steel and the cutter is still going strong. I have been using it in a bench mill so I have control over the proper feed and cutting speed but for thinner steel, using it in a hand held drill would work fine.
Pink Lindgren (verified owner) –
This product was very well made these hole saws will cut through almost anything.
Arnoldo Ebert (verified owner) –
Very easy get material out of saw
Titus Kuphal (verified owner) –
Needed a carbide option but there was none. Was only able to get 5 holes in plaster with each hole saw.
Erin Hyatt (verified owner) –
Exactly what i needed
Zetta Stracke (verified owner) –
Después de 2 usos se tarda más en hacer el corte.
Giovanni Farrell (verified owner) –
Would suggest a 1/2 inch drill to drill 4 1/4 ” hole.May have burned out my 3/8 drill
Alexane Ortiz (verified owner) –
Anything Milwaukee makes is excellent, but I haven’t used the product yet because I didn’t realize I needed a different sized arbor from my 1 3/4 inch Milwaukee hole dozer.
Malcolm Hudson (verified owner) –
If you are using 3 inch pipe and need to get it through a hole you will need the 3.5 inch hole. Works great for my application. I really like all the holes to help you get the plug out.
Damion Schroeder (verified owner) –
Made quick work of two joists I had to cut through for a new exhaust fan. Highly recommend.
America Feeney (verified owner) –
Sharp hole saw that is tough. Very happy with purchase.
Shanelle Heaney (verified owner) –
Perfect tool needed to get the job done right.