Milwaukee 1-3/4 in. Hole Dozer Bi-Metal Hole Saw
$11.98
The Milwaukee Hole Dozer Hole Saw features Rip guard, the strongest tooth form in the industry, backed by the Rip guard limited lifetime tooth break warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8% cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. The Hole Dozer includes Plug Jack, an all access slot design that allows for full access during plug removal. The Plug Jack gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack increases productivity and eliminates wasted downtime between holes. For fast, tool-free change-outs, use Milwaukee’s universal Quick-Change Arbors. 49-56-7210, 49-56-7240, 49-56-7250 and 49-56-9100.
In stock
Description
The Milwaukee Hole Dozer Hole Saw features Rip guard, the strongest tooth form in the industry, backed by the Rip guard limited lifetime tooth break warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8% cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. The Hole Dozer includes Plug Jack, an all access slot design that allows for full access during plug removal. The Plug Jack gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack increases productivity and eliminates wasted downtime between holes. For fast, tool-free change-outs, use Milwaukee’s universal Quick-Change Arbors. 49-56-7210, 49-56-7240, 49-56-7250 and 49-56-9100.
- Rip guard, the strongest tooth form in the industry
- Rip guard limited lifetime tooth break warranty
- Plug jack, an all access slot design for fast plug removal
- Bi-metal construction with 8% cobalt for increased wear resistance
Additional information
| Weight | 4.14 lbs |
|---|---|
| Dimensions | 1.75 × 1.90 × 1.75 in |
| Arbor included | No |
| Bit Diameter | 1-3/4 in |
| Bit Length (in.) | 1.625 |
| Bit Material | Bi-Metal |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 1.8 |
| Hole Saw Diameter (in) | 1-3/4" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | 1/2 In. |
| Model | 49-56-9621 |
| Pilot Bit Included | No |
| Shank Style | Hex |
| Tools Product Type | Power Tool |
Reviews (65)
65 reviews for Milwaukee 1-3/4 in. Hole Dozer Bi-Metal Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Milwaukee 18 in. x 7/16 in. Bit Extension Bit Extention For Selfeed Bits and Hole Saws
Model# 48-28-4011
Drill Bits
Model# DW2043 Z
Drill Bits
Model# DW2542
Drill Bits
Model# DW2162
Drill Bits
Model# DW2046 G
Drill Bits
Model# DW2535
Drill Bits
Model# 48-25-2252
Drill Bits
Model# 49-56-7010
Marisol Wolff (verified owner) –
Needed a carbide option but there was none. Was only able to get 5 holes in plaster with each hole saw.
Jadon Adams (verified owner) –
Sharp hole saw that is tough. Very happy with purchase.
Jermey Moore (verified owner) –
Well built great design.
Izaiah Friesen (verified owner) –
I needed a hole for the dishwasher on my stainless steel sink. However there was only one hole and that was for the single handled faucet. I was not too sure if this bi-metal would work but cut right through like butter. Although About 1/3 of the teeth are now flat i am still glad it worked very well. I First used 1/8 metal drill bit in the center of the hole i drew out on the sink. Than incrementally increased the hole diameter to the proper 1/4″ drill bit size. Once that was set I switched to this Hole Dozer and its holder (which used a 1/4 drill it) and away i went. less than 30 seconds I has a new perfectly round hole in my stainless sink.
Garrison Brakus (verified owner) –
If you are using 3 inch pipe and need to get it through a hole you will need the 3.5 inch hole. Works great for my application. I really like all the holes to help you get the plug out.
Carmine Kuhlman (verified owner) –
These hole saw are always great, better design than older ones makes it easier for wood clearing!
Obie Ziemann (verified owner) –
Returned for different product.
Caleigh Witting (verified owner) –
Excelente herramienta….
Gerard Romaguera (verified owner) –
Started with this brand and add sizes as needed
Luna Bartell (verified owner) –
Después de 2 usos se tarda más en hacer el corte.
Amara Gleason (verified owner) –
Good product – did the job perfect.
Okey McDermott (verified owner) –
very very good hole saw
Niko Gorczany (verified owner) –
Perfect tool needed to get the job done right.
Collin Schuppe (verified owner) –
Great tool and long lasting
Ulices Block (verified owner) –
Worked just fine easy to use drilled hole with no problems.
Brant Rodriguez (verified owner) –
The hole saw did a good job, but was a costly.
Patience Connelly (verified owner) –
I needed to cut a 4 1/4 hole and this did the job. I’d guess any of the several companies that make these hole saws would be just as good
Horace Frami (verified owner) –
Excellent, well designed hole saw. It is far easier to remove the cut materials from this hole saw than with the design from most other manufacturers. It is a long life hole saw as well.
Manley Rodriguez (verified owner) –
This is what you want if you are going to use it more than once.
Damon Rosenbaum (verified owner) –
Great for wizzing through sheet rock and wood.