Milwaukee 5 in. Hole Dozer Bi-Metal Hole Saw
$41.97
Cut precise holes in your wood, plastic, aluminum, brass, steel alloys and stainless steel with the help of this Milwaukee Hole Dozer Bi-Metal Hole Saw.
In stock
Description
Bi-metal tooth construction on the Milwaukee 5 in. Hole Dozer Hole Saw features a robust composition of steel and 8% cobalt that is backed by a Rip Guard lifetime limited warranty against breakage for ultimate cutting performance and confidence. This hole saw drill attachment is fashioned with innovative Plug Jack diagonal slots that allow easy removal of plugged material, allowing work to proceed at a steady clip.
- Durable bi-metal construction features 8% cobalt for increased wear resistance
- Steel-reinforced teeth are covered by a lifetime limited rip guard warranty against breakage
- Fashioned with all-access diagonal plug jack slots for fast removal of plugged material
- Use with separately sold Milwaukee quick-change arbors (models 49-56-7210, 49-56-7240, 49-56-7250, 49-56-9100)
Additional information
| Weight | 1.31 lbs |
|---|---|
| Dimensions | 5.00 × 5.00 × 2.00 in |
| Arbor Size | 0 |
| Individual/Set | Individual |
| Teeth Per Inch | 4/5 |
| Shank Style | Hex |
| Pilot Bit Included | No |
| Model | 49-56-9652 |
| Min Chuck Size Required | 1/2 In. |
| Material Cut | Multi-Purpose |
| Hole Saw Diameter (in) | 5" |
| Arbor included | No |
| Drilling Depth (in) | 1.8 |
| Drill Bit Type(s) Included | Hole Saw |
| Drill Bit Type | Hole Saw |
| Bit Material | Bi-Metal |
| Bit Length (in.) | 1.625 |
| Bit Diameter | 5 in |
| Tools Product Type | Power Tool |
Reviews (65)
65 reviews for Milwaukee 5 in. Hole Dozer Bi-Metal Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# 48-25-2252
Drill Bits
Model# 282303
Drill Bits
Milwaukee Selfeed High-Speed Steel Wood Boring Bit Set (7-Piece)
Model# 49-22-0130
Drill Bits
Model# FB-015
Drill Bits
Model# 48-28-1010
Drill Bits
Model# 48-20-8856
Drill Bits
Model# DW2043 Z
Drill Bits
Model# FB-007
Precious Rowe (verified owner) –
Worked as expected, but should have bought the adjustable one.
Maximillian Turner (verified owner) –
Después de 2 usos se tarda más en hacer el corte.
Elsie Ernser (verified owner) –
I needed a hole for the dishwasher on my stainless steel sink. However there was only one hole and that was for the single handled faucet. I was not too sure if this bi-metal would work but cut right through like butter. Although About 1/3 of the teeth are now flat i am still glad it worked very well. I First used 1/8 metal drill bit in the center of the hole i drew out on the sink. Than incrementally increased the hole diameter to the proper 1/4″ drill bit size. Once that was set I switched to this Hole Dozer and its holder (which used a 1/4 drill it) and away i went. less than 30 seconds I has a new perfectly round hole in my stainless sink.
Ciara Hirthe (verified owner) –
I purchased this hole saw to use for cutting holes in steel and it worked flawlessly. So far I have bored six 2″ diameter holes in 1/8″ thick steel and the cutter is still going strong. I have been using it in a bench mill so I have control over the proper feed and cutting speed but for thinner steel, using it in a hand held drill would work fine.
Llewellyn Hoppe (verified owner) –
Anything Milwaukee makes is excellent, but I haven’t used the product yet because I didn’t realize I needed a different sized arbor from my 1 3/4 inch Milwaukee hole dozer.
Grayce Stracke (verified owner) –
Worked great. Cut the bed of my truck in short order for underbody gooseneck towing installation. DIY
Cornell Upton (verified owner) –
Started with this brand and add sizes as needed
Kaley Spinka (verified owner) –
This product was very well made these hole saws will cut through almost anything.
Bettie Fay (verified owner) –
The hole saw works excellant
Reginald Toy (verified owner) –
I had made some holes in my 1979 ford truck and it works very well.
Kelley Jones (verified owner) –
Works great. Bites hard. Hold on to that drill real tight though! It’ll take you for a ride
Freddy Fadel (verified owner) –
Lasted 3 minutes with 16 ga sheet metal.
Lola Feest (verified owner) –
It’s an ok hole saw. Could be longer lasting
Kraig Sporer (verified owner) –
Returned for different product.
Emily Larson (verified owner) –
Made quick work of two joists I had to cut through for a new exhaust fan. Highly recommend.
Vilma Rutherford (verified owner) –
I had the Milwaukee Dozer before and it wore out after many uses. Although it felt sharp it would take 15 minutes to bore through a 2×10. It is amazing how much faster and how much time is saved with the new one. The cost is worth the time savings. I wish there was a way to refurbish the old one that appears to be good. Perhaps, like printer cartridges, Milwaukee should supply a postage-free bag to return the old. I have several of different sizes that could be refurbished. It is a good tool worth the cost.
Emilio Barrows (verified owner) –
These are great. I used it for notching a roll cage in a car. I tried a competitor carbide tipped deeper saw that was blue and it destroyed itself. The Hole Dozer was awesome.
Serenity Maggio (verified owner) –
Good and sharp. Got the job done efficiently.
Bernard Beer (verified owner) –
good quality hole saw bit, very durable
Ernestine Ryan (verified owner) –
Does exactly what it’s supposed to do.