Milwaukee 6 in. Hole Dozer Bi-Metal Hole Saw
$48.26
The Milwaukee 6 in. Hole Dozer Hole Saw features Rip Guard teeth that were built with more steel behind the cutting edge for added strength. They give you increased productivity on the job site as well as better hole quality, and are backed by a limited lifetime tooth break warranty. The Hole Dozer comes with a Plug Jack, an all-access slot design that allows for full access during plug removal. The Plug Jack enables access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, the Plug Jack eliminates wasted downtime between holes. Pair this hole saw kit with universal quick-change arbors for fast, tool-free change-outs (model numbers 49-56-7210, 49-56-7240, 49-56-7250 and 49-56-9100 – sold separately).
In stock
Description
The Milwaukee 6 in. Hole Dozer Hole Saw features Rip Guard teeth that were built with more steel behind the cutting edge for added strength. They give you increased productivity on the job site as well as better hole quality, and are backed by a limited lifetime tooth break warranty. The Hole Dozer comes with a Plug Jack, an all-access slot design that allows for full access during plug removal. The Plug Jack enables access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, the Plug Jack eliminates wasted downtime between holes. Pair this hole saw kit with universal quick-change arbors for fast, tool-free change-outs (model numbers 49-56-7210, 49-56-7240, 49-56-7250 and 49-56-9100 – sold separately).
- Features Rip Guard teeth with more steel behind the cutting edge for enhanced durability
- Backed by a limited lifetime tooth break warranty
- Equipped with plug jack, an all-access slot design for fast plug removal
- Features bi-metal construction with 8% cobalt for increased wear resistance
Additional information
| Weight | 1.96 lbs |
|---|---|
| Dimensions | 6.00 × 6.00 × 1.94 in |
| Arbor included | No |
| Bit Diameter | 6 in |
| Bit Length (in.) | 1.625 |
| Bit Material | Bi-Metal |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 1.8 |
| Hole Saw Diameter (in) | 6" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | 1/2 In. |
| Model | 49-56-9656 |
| Pilot Bit Included | No |
| Shank Style | Hex |
| Tools Product Type | Power Tool |
Reviews (65)
65 reviews for Milwaukee 6 in. Hole Dozer Bi-Metal Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# 282303
Drill Bits
Model# 48-25-2252
Drill Bits
Model# 282269
Drill Bits
Model# DW2043 Z
Drill Bits
Model# 49-56-0247
Drill Bits
Model# FB-003
Drill Bits
Model# 48-32-2100
Drill Bits
Milwaukee 1/4 in. X 3-1/2 in. Pilot Drill Bit For Hole Saw Arbor
Model# 49-56-8010
Albina Keebler (verified owner) –
The hole saw did a good job, but was a costly.
Stone Lemke (verified owner) –
Good product, faithfully buy this over and over.
Elvis West (verified owner) –
Good and sharp. Got the job done efficiently.
Harvey Nader (verified owner) –
Did the job flawlessly. I had no problems with it at all.
Christa Murphy (verified owner) –
Extremely great buy. #fitmentcheck
Zakary Metz (verified owner) –
Did the job but whin I was done there was nothing done. Teeth wore off fast.
Phoebe Smitham (verified owner) –
Great tool and long lasting
Electa Klein (verified owner) –
Worked great. Cut the bed of my truck in short order for underbody gooseneck towing installation. DIY
Laverna Fritsch (verified owner) –
I needed a hole for the dishwasher on my stainless steel sink. However there was only one hole and that was for the single handled faucet. I was not too sure if this bi-metal would work but cut right through like butter. Although About 1/3 of the teeth are now flat i am still glad it worked very well. I First used 1/8 metal drill bit in the center of the hole i drew out on the sink. Than incrementally increased the hole diameter to the proper 1/4″ drill bit size. Once that was set I switched to this Hole Dozer and its holder (which used a 1/4 drill it) and away i went. less than 30 seconds I has a new perfectly round hole in my stainless sink.
Kolby Auer (verified owner) –
As expected. No issues
Shania Crist (verified owner) –
Needed a carbide option but there was none. Was only able to get 5 holes in plaster with each hole saw.
Taryn Kulas (verified owner) –
The hole saw works excellant
Melisa Bauch (verified owner) –
This is what you want if you are going to use it more than once.
London Swift (verified owner) –
Excellent, well designed hole saw. It is far easier to remove the cut materials from this hole saw than with the design from most other manufacturers. It is a long life hole saw as well.
Buddy Hyatt (verified owner) –
This product was very well made these hole saws will cut through almost anything.
Jeffry Kunze (verified owner) –
performed well, drilled thru truck bed and looks like brand new.
Eldora Johnson (verified owner) –
Exactly what i needed
Amalia Ortiz (verified owner) –
Hole saw did the job but it was measurably out of round, even disregarding the ridge at the welded seam. Worked but disappointing, esp for Milwaukee
Roxane Wiza (verified owner) –
Great for wood, or mild steel sheet metal!
Gregorio Hermann (verified owner) –
I needed to cut a 4 1/4 hole and this did the job. I’d guess any of the several companies that make these hole saws would be just as good