Milwaukee 7/8 in. SHOCKWAVE IMPACT DUTY Hole Saw
$14.67
Shockwave Hole Saw from Milwaukee is convenient to use in plastics and thin gauge metals. Designed to deliver a burr-free cut.
In stock
Description
Designed with a robust 1/4 in. quick change hex shank, Milwaukee Shockwave Impact Duty Thin Wall Hole Saws give professionals a hole making solution to use with impact drivers. Utilizing a thin wall, 8 TPI design, Thin Wall Hole Saws deliver a burr-free cut up to 40% faster than standard bi-metal hole saws. The included ejection spring removes the frustration of manually removing slugs by automatically ejecting the material. A stop shoulder design prevents over-drilling into material and potentially damaging inner components of electrical and junction boxes. Chose Thin Wall Hole Saws for use in plastics and thin gauge metals up to 1/8 in. thick.
- 1/4 in. quick change Hex Shank for use with Impact Drivers
- Thin Wall 8 TPI design for 40% faster cuts than standard bi-metal hole saws
- Stop Shoulder design prevents over-drilling and damaging components
- Ejection spring automatically removes slugs
Additional information
| Weight | .13 lbs |
|---|---|
| Dimensions | 1.10 × 2.80 × 6.40 in |
| Arbor Size | 0.25 |
| Material Cut | Multi-Purpose |
| Teeth Per Inch | 8 |
| Shank Style | Hex |
| Shank Diameter | 1/4 in |
| Pilot Bit Included | No |
| Model | 49-56-9810 |
| Min Chuck Size Required | 1/2 In. |
| Individual/Set | Individual |
| Arbor included | Yes |
| Hole Saw Diameter (in) | 7/8" |
| Drilling Depth (in) | 1.8 |
| Drill Bit Type(s) Included | Hole Saw |
| Drill Bit Type | Hole Saw |
| Bit Material | High Speed Steel |
| Bit Length (in.) | 2.8 |
| Bit Diameter | 7/8 in |
| Tools Product Type | Power Tool |
Reviews (69)
69 reviews for Milwaukee 7/8 in. SHOCKWAVE IMPACT DUTY Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# FB-015
Drill Bits
Model# DW2046 G
Drill Bits
Bosch 20 in. x 3 in. Hammer Steel 1-1/8 in. Hex Chisel for Demolition Hammer
Model# HS2164
Drill Bits
Model# DW2542
Drill Bits
Bosch 20 in. Hammer Steel 1-1/8 in. Hex Moil Point Chisel for General Chipping Work
Model# HS2161
Drill Bits
Model# DW2045 G
Drill Bits
Model# DW2535
Drill Bits
Model# 48-32-2100
Enos Lehner (verified owner) –
Sharp as ever, even after several use.
Lorenz Reichert (verified owner) –
Really good hole saw! Best one i have used in my 12yrs of construction work!
Clementine Ebert (verified owner) –
This hole saw cuts smoothly through metal studs, however I would recommend not using an impact for it damages the teeth of the hole saw.
Oleta Schroeder (verified owner) –
It drills holes!
Mackenzie Reynolds (verified owner) –
Eats up the metal framing like candy
Karlee Mayer (verified owner) –
Great hole saw. Cuts well and is long lasting. Finding that the little spring is not always popping out the round slug after sawing all the way through.
Maxine Olson (verified owner) –
I’ve been happy with these bits,they cut fast and don’t travel from the start point
Orion Graham (verified owner) –
i cut thin steel with them for electric boxes its fast and from what i have seen they stay sharper then a normal hole saw.(note my crew is green AF so full speed ahead captain)they burn em faster then i can buy them
Davin Hodkiewicz (verified owner) –
Great hole saw. I needed to add an RO water faucet in a stainless steel sink. It cut a very clean hole and went right through. The blade hardly had a mark On it when finished. Toughest metal cutting hole saw I have ever used.
Sadye Gutkowski (verified owner) –
The hole saw worked pretty well and did what its designed to do.
Amie Boyle (verified owner) –
Had to cut a hole in a metal security door. Did the job perfectly.
Ashlynn Hauck (verified owner) –
Worked very well for cutting holes in tub deck.
Alycia Schroeder (verified owner) –
Use for hole cutting on stainless steel plumbing fixtures. Make a fast, clean hole. No drifting. Reasonably priced.
Dagmar Bauch (verified owner) –
Used this holesaw to drill into stainless steel. Worked great.
Lavern Gaylord (verified owner) –
These drill bits work great for electrical conduit installs, it drills quickly as it has a thin wall cutting edge and does not remove a large amount of metal, which reduces the amount of shavings.
Dereck Dach (verified owner) –
Sweet on an impact
Lincoln Pollich (verified owner) –
Awesome bit.I definitely recommend it.
Reese Kris (verified owner) –
This is nice product down side is it is a one piece design so you cannot use the bit part for other size hole saws. The good part is it is a thinner saw it cuts quicker with more precision and the spring releases the circular piece that is left over, I like the way this saw worked and will go looking for this product first in the future.
Lempi Batz (verified owner) –
Cuts metal like butter!
Morgan Runolfsdottir (verified owner) –
Gteat tool for small spaces