Milwaukee 1/4 in. Metal Fastening Adjustable Screwdriver

7 reviews for Milwaukee 1/4 in. Metal Fastening Adjustable Screwdriver

1. Rated 5 out of 5

   Stella Raynor (verified owner) – September 14, 2022

   This Milwaukee Heavy-Duty Screwdriver with the cord, to me is better than the portable battery pack screwdrivers I own. . The drill also has more torque power plus the cord itself has a good length to it about 10 feet. The easy connect/disconnect of the bits also adds to the ease of operation, Yeah! I would recommend this product to my friends. Just to warn you, In the manual it show how you can replace the cord, well either I’m doing it wrong or it holds true for some models but, not this one.

2. Rated 5 out of 5

   Ed Medhurst (verified owner) – July 22, 2022

   This review is for the Milwaukee 1/4 IN. Metal Fastening Adjustable ScrewdriverMy husband is very happy with the performance of this Adjustable Screwdriver. He found it easy to handle. As we are a Milwaukee Family and love all of there products. This one is no exception.This Screwdriver has variable speeds from 0-2500 RPM with a 6.5 amp motor. It also uses a 21 position adjustable clutch. With a quick change 1/4 in hex chuck. The first project that my husband used it on was a frame made of 2×4’s and plywood. He used a screw holder that made it easy to use with one hand. And found no difficulty.He found that it sank the screws just right. You do have to use pressure to engage the chuck. But once you start using it becomes easier. He also likes the fact that it is corded. Because with his battery powered tools he has to keep swapping batteries especially on a large project.With this Milwaukee Adjustable Screwdriver you do not have to worry about that at all.It has a forward and reverse switch and also a locking switch that allows you to pull the trigger and lock it on. There are and endless amount of drill bits, screwdriver bits, and nut driver bits that are available to use in this quick change chuck. that makes this one very versatile tool.He definitely recommends this to anyone and is looking to use this on more projects both metal and wood. He found it very comfortable to handle.It weighs 4.92 lb L 13″ H 10″ D 3 MFG warranty 5 years” Return Policy 90 Days Very Happy with the performance of Milwaukee Tools and very happy with the performance of this Milwaukee Fastening Adjustable Screwdriver.As with all Milwaukee Tools, they are made strong and sturdy.

3. Rated 4 out of 5

   Reilly Wuckert (verified owner) – March 16, 2022

   The “1/4 in. Metal Fastening Adjustable Screwdriver” by Milwaukee is and does exactly what it claims. I have always found the Milwaukee brand to be a reliable top of the line brand. This screwdriver is lightweight but powerful with a 6.5 amp motor. it is balanced with good speed range.I like the self locking feature and the comfortable grip. I recommend this product.

4. Rated 5 out of 5

   Helene Tremblay (verified owner) – December 23, 2021

   Performed as expected. Felt like it was very high quality.

5. Rated 5 out of 5

   Ana Heaney (verified owner) – November 21, 2021

   This is a very powerful but it takes some getting used to. First, this thing is big and hefty. Second, you need to apply pressure to the chuck in order to get rotation. When you pull the trigger the motor starts but you apply pressure to engage it. The clutch settings change easily and click into place.This sank self tapping sheet metal screws into HVAC ducting with ease. For the light duty HVAC lines, register boxes, and connectors, I had the drill on the lowest torque setting to avoid stripping. For sinking larger wood screws into 2x material I used the “10” setting on the clutch. Driving 1-5/8″ deck screws into 2x material was a breeze on the 10th setting. Putting the drill on max will drive a 3″ deck screw straight through a 2×4 if you can keep pressure (tried it just for the heck of it). The drill is designed to be held in a variety of ways. For some angles I preferred holding it like a cordless drill but for most settings where I was behind the drill I wrapped my hand around the back so that my ring and pinkie finger were on the trigger. This was quite comfortable and gave me a lot of control. I was also able to easily change directions with my ring finger when holding it this way.The 1/4″ hex chuck is easy to use and you just slide it forward to remove a bit. To put a bit in you need to slide it forward, insert the bit, and then let the chuck and bit travel backwards together (different than my cordless impact). The grooves on the clutch are easy to grab. I used a variety of hex bits and they all fit easily. I haven’t used the belt clip but it feels sturdy and you can slide a hex bit into the back of it to hold an extra bit. My only concern is that the chuck shaft is oiled and may attract dust and particulates over time.

6. Rated 4 out of 5

   Darrin Bogan (verified owner) – February 12, 2021

   This Milwaukee Metal Fastening Adjustable Screwdriver is designed to work with sheet metal, being corded is better for occasional use or using in one area, but can be used for a variety of other screwing tasks. Because it has a 1/4″ hex chuck and a 21 position clutch it offers a variety of bit and depth settings for any steel duct, steel roof/siding, or general sheet metal project, fasting them together or to other materials.

7. Rated 3 out of 5

   Isadore Dickinson (verified owner) – December 17, 2020

   Purchased to screw on metal roofing to replace the old shingled roof. Did a good job but the drill body too long and wide to successfully place the screw point with one hand. Took one hand to hold the 3″ screws and the other on the drill so had some wobbling and resultant “screw fly away”. Nicer ergonomics would have been better. The clutch mechanism seemed to work but same setting would dimple the roof on one screw and leave the next one too high. Did the job fine but left a few questions. Will have to see what happens when the new building goes up this spring.