NinjaTek NinjaFlex 1.75mm 85A TPU Flexible Filament (1kg, Fire)
$35.66
In stock
Description
Print your 3D model in fire with the NinjaTek NinjaFlex 1.75mm 85A TPU Flexible Filament.
With a shore hardness of 85A, this thermoplastic polyurethane (TPU) flexible filament has 68% better abrasion resistance than PLA and 20% better abrasion resistance than ABS. Designed to be flexible, this filament features up to 660% elongation, which allows for repeated movement and impact without wear or cracking. The composition can also help reduce vibration. This filament doesn’t need glue or tape when printing on a standard print bed. It is also resistant to many chemicals, such as naphtha, ASTM oils #1-3, petroleum, and freon.
Additional information
| Weight | 3.8 lbs |
|---|---|
| Dimensions | 9 × 9 × 3 in |
| Filament Diameter | 1.75 mm |
| Filament Material | TPU |
| Filament Properties | Flexible |
| Color | Red |
Reviews (3)
3 reviews for NinjaTek NinjaFlex 1.75mm 85A TPU Flexible Filament (1kg, Fire)
Only logged in customers who have purchased this product may leave a review.
Related products
3D Printers & Accessories
3D Printers & Accessories
3D Printers & Accessories
3D Printers & Accessories
3D Printers & Accessories
3D Printers & Accessories
Chroma Strand Labs 3mm INOVA-1800 Filament (1 kg, LulzBot Green)
3D Printers & Accessories
3D Printers & Accessories
NinjaTek Armadillo 1.75mm 75D TPU Nylon Alternative Filament (1kg, Grass)
Raphaelle Baumbach (verified owner) –
I printed a few test prints with this on my upgraded Ender 3 pro. My extruder is upgraded to a EZR Struder by SeeMeCNC, no issues what so ever printing this stuff so far. Like others have mentioned, the filament is not in a vacuum sealed bag and only has 1 desiccant packet in the box. At least the box was shrink wrapped. I would order this again when the time arrives.
Aleen Doyle (verified owner) –
The price is great, but my roll came without a Vacuum sealed bad and had cardboard lint all over it. I had to blow all the lint out of the filament and dry it for a full day to be able to use it.
Susan Feil (verified owner) –
I took me a while to dial it in – I noticed black behaves differently than the Sun (yellow). Both require printing SLOW and reducing retraction. Ive been able to leave retraction enabled for most prints. I print with 1.2mm retraction, 235C and 40C for the bed, Max volumetric speed of 5mm/sec, 10mm/sec first layer and auto-adjusted speeds based on volumetric for everything else. I also use a glue stick for the adhesion (so as not to mess with the PEI). This is with my MK3 which has copper/nickel heatblock, nozzle, silicon sock and upgraded heatbreak fan. A stock MK3 should work as well but Im not sure what the best settings would be.