Installing a Pelican Water series water filter or water softener has never been easier than with the Pelican Water Whole House Dual Installation Kit. With this helpful kit, there is never any need to deal with the mess of cutting pipes or glue. This convenient install kit uses John Guest Quick fittings. All you need to do is to bring the incoming and outgoing water lines to the John Guest fittings and connect them. In some cases, additional piping and fittings may be needed to bring the incoming and outgoing water lines to the John Guest connections in this kit. If you have any questions about installation, please contact 1 of our Pelican Water installation experts today at 877-842-1635.
- Quick connect fittings for CPVC, copper, PEX and 1 in. PVC speeds up setup
- No more gluing or pipe cutting makes for an easy installation
- 1 year parts warranty
- Kit fits Pelican Water models PSE1800, PSE2000
Mertie Heller (verified owner) –
I recommend getting the dual tank install kit. Cheaper and easier than piece meal approach with a bucket of fittings.
Angelo Kris (verified owner) –
Good kit and easy to follow…great quality.
Henry Wiza (verified owner) –
This came with everything that was needed to attach the system together. You still have to bring your house water to the sediment filter and then back from the water softener. All of the connection points that have O-rings and snap rings were preassembled and made the installation very easy.
Alek Botsford (verified owner) –
I purchased the installation kit because I was doing work to replace the cement stepping stones my tanks were sitting on with a cement slab pad & wasn’t sure I could get the copper pipes/ fittings to line up. Worked better than expected because I didn’t have to solder fittings to the installation kit because they were compression fittings.
Rosalee Trantow (verified owner) –
This kit makes installation a breeze. Tip: You should make it clearer that this kit is necessary for fast easy installation.
Lina Friesen (verified owner) –
The best of the best. Fantastic value for the money. Wonderful clean water.
Jadon Ward (verified owner) –
The flexible hoses made the installation much easier! Connecting the different components of the Pelican Whole House Water System with this installation kit is ideal. Not having a rigid connection has allowed me to easily move my tanks a couple of times to correct problems caused by the inept plumber I hired. Since these fittings attach and detach so easily without leaks, I am sure I will enjoy using them for many years ‰ЫТ especially when it is time to change out the carbon filter medium. The installation kit is well worth the cost! The fittings and hoses are well designed and user friendly. Good Job Pelican!
Lloyd Lang (verified owner) –
This kit is a no-brainer. While utilizing no tools at all, you can make connections that do not leak. I’ve had my system running now for 5 days, and these connections are rock solid. Simple too, just slide them onto 1″ copper, pex, cpvc. The lines are easily bent by hand to get the angles you need. Hand tighten the connections to the tank and simply slide over (in my case) pex, and you’re done.
Catherine Zboncak (verified owner) –
Made the installation so much easier with this kit.
Rebecca Leuschke (verified owner) –
Original install looked very complicated. Once I called and this was recommended, my life became easier.
Everett Ondricka (verified owner) –
Kit is good but my Plummer didn’t need to use it. He only use one of the short pipe.So don’t buy it if you don’t need to, ask your plummer first, save yourself 200$.
Rosalia Mills (verified owner) –
I would definitely recommend this if your going to install it yourself or have a plumber do it .The install is a lot easier and it looks nicer then pvc pipe. My first thought was it is a little pricey but the quality is there so it’s worth it.
Karolann Ondricka (verified owner) –
A little expensive but it does make installation easier and faster.
Talia Johns (verified owner) –
2 months since install. All is well.
Brenden Nitzsche (verified owner) –
Appear to be a good kit if you’re not too handy with copper lines and fixings, this kit will save lots of time installing the unit. My plumber chose to install everything with copper for a more professional look so we returned the kit. However, if you decided to install yourself I strong recommend that you use this installation kit.
Webster Hoeger (verified owner) –
The kit made the installation much nicer. I did have to sweat 1” copper fittings on my main line in the garage but everything fit together nicely including the connection to my 1” pipes and upon start up I didn’t even see a drop of water anywhere.
Jefferey Hintz (verified owner) –
I’m loving this purchase. Best decision I’ve made ever
Kara Walker (verified owner) –
Little pricy but saves a lot of time searching for the right parts. I installed on my own but I am not a plumber and no leaks! Only complaint is that it would be nice to have another option for connecting inlet side of pre-filter. Took me an extra trip for parts to connect.
Seamus Bradtke (verified owner) –
The kit has good quality. It fitted perfectly and made the installation much easier.
Walker Kiehn (verified owner) –
This came in handy rather than having to measure and cut pipes. This installed quickly and very clean looking.