POWERTEC Rip Fence for POWERTEC Wood Band Saw
$30.84
Cut or trim your woods safely and quickly with the selection of this extremely durable POWERTEC Rip Fence for POWERTEC Wood Band Saw.
Only 10 left in stock
Description
The POWERTEC BS900RF Rip Fence is ideal for use with the POWERTEC B900 Wood Band Saw, and other compatible saw models. This rugged, dependable and ultra-convenient tool ensures that you have exactly the support that you need to achieve perfectly straight parallel cuts every time. Conveniently designed to fit, and firmly clamp, on any 11-3/4 in. band saw table. Its durable, industry-grade aluminum construction means it’s built to get the job done every time. The POWERTEC Rip Fence installs square and solid for the optimum in high-performance sawing and critical worker safety. Handy cam-lever provides both hassle-free adjustment and secure placement lock, providing the utmost in dependability and rigidity. No assembly needed, it’s ready to use right out of the package. Some adjustment may be required. This indispensable accessory is easy to handle and store – weighing in at 13.4 oz. Dependable, rugged, essential. Compatibility: ．POWERTEC 9″ band saw BS900 ．Ryobi 9″ bandsaw ．Fit work table with 300 mm x 300 mm
- Sturdy extruded aluminum construction means it’s solid and durable
- Provides for straight parallel cuts
- By using the handy adjustable cam, the clamp can adjust from 11-1/8 in. up to 11-13/16 in.
- Arrives fully assembled, right out of the package
- Simple, effective cam lever action means device is securely locked in place
- Design to fit, without rails, a table 3/8” thick and 11-3/4” long
- Setting The Rip Fence： (1) Raise the fence locking lever on the rip fence (2) Place the rip fence on the work table so that fence locking lever is at the front of the work table. (3) Lower the fence locking lever in order to lock the rip fence in position on the work table. (4) If the fence is too loose, turn the locking lever clockwise to tighten. If the fence is too tight, turn the locking lever counterclockwise to loosen. (5) Once proper tension is set, press the head of the fence against the front of the table and lower the locking cam until it locks.
- If the fence is not parallel to the blade or needs to be moved to correct blade drift, it can be adjusted by loosening the two screws on top of the fence. (1) Unclamp the fence and press the head against the table to make sure it is square to the table. (2) Loosen the two screws on top of the fence block and move the fence the required amount. (2) Tighten the two screws and clamp to make sure fence is now in the proper alignment.
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 0.65 lbs |
|---|---|
| Dimensions | 14.00 × 3.00 × 5.00 in |
| Color Family | Silver |
| Ideally Used With | Stationary Band Saws |
| Material | Aluminum |
| Model | BS900RF |
| Power Tool Accessory Type | Other Accessory |
| Product Length (in.) | 14 in |
| Tools Product Type | Power Tool |
Reviews (15)
15 reviews for POWERTEC Rip Fence for POWERTEC Wood Band Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Specialty Power Tool Accessories
Model# 53872
Specialty Power Tool Accessories
Model# 56035-047
Specialty Power Tool Accessories
Model# 49-16-2668
Specialty Power Tool Accessories
Model# 3653
Specialty Power Tool Accessories
Model# TWX7RTK
Specialty Power Tool Accessories
Model# DCGG5701-3
Specialty Power Tool Accessories
Model# 53871
Specialty Power Tool Accessories
Model# 13266
Leonie Hilpert (verified owner) –
Although it feels a bit lightweight, this fence clamps snugly to the table and maintains a perpendicular face once locked in place. It has no self-squaring capability, but for use on small tables with a non-parallel cutter or bit, it does the job. I’m using mine for a hot wire foam cutter I built.
Stanton Kautzer (verified owner) –
Nice simple fence. It has no indexing feature so you must manually measure off the blade or table edge to insure the proper distance and “squareness” for a straight cut. It is a bit pricey but is easier than my previous method of c-clamps and a piece of angle aluminum.
Nigel Roob (verified owner) –
There was no instruction sheet on adjusting it. Unfortunately I didn’t set it up correctly and I broke the lever that tightens it on the table. I called to see if I could buy a replacement lever but that was not possible. I’ve glued it together and it appears to work OK, and will be usable, as it is, for a long time if I’m cautious. I always read instructions, you never know what they are going to tell you about what you just got.
Carmella Lemke (verified owner) –
This fits both older and newest Ryobi 9′ band saw tables perfectly.
Adela Lang (verified owner) –
just slightly too small. my fault measured wrong.
Marilie Maggio (verified owner) –
Fit perfectly on my Central Machinery 9” Bandsaw from Harbor Freight.
Tyra Bernhard (verified owner) –
It does, what it says it does.
Pansy Kemmer (verified owner) –
Although it feels a bit lightweight, this fence clamps snugly to the table and maintains a perpendicular face once locked in place. It has no self-squaring capability, but for use on small tables with a non-parallel cutter or bit, it does the job. I’m using mine for a hot wire foam cutter I built.
Gianni Spencer (verified owner) –
This item is something that you have to adjust a more than i thought to would have to but it does do what it is designed to do. Thank you.
Valentine Reichel (verified owner) –
Works GREAT!
Delta Hessel (verified owner) –
Not what I thought it was. Much shorter than what I need. Otherwise, I think it would be GREAT!
Lisette Schinner (verified owner) –
I purchased this rip fence to do small projects. I’m pleased with how accurate it is. I regret no buying it years ago!
Minnie Grimes (verified owner) –
It seems to be a good product
Hans Nikolaus (verified owner) –
Fit perfectly. Slides easily and locks in place.
King Johnson (verified owner) –
Ordered this for my 9″ Harbor Freight bandsaw. I have to say, the fence fit like a champ. I have only used it on the bandsaw once so far, but I have to say I am very pleased. I am most pleased that it actually fit.