POWERTEC Heavy-Duty Universal Tool Stand
$55.53
In stock
Description
The POWERTEC UT1002 Universal Tool Stand is designed to provide you with a solid, sturdy and versatile working surface that offers flexibility for many of your day-to-day applications. It’s the perfect support option for your bandsaws, disc sanders, drill presses, planers, and other bench-top tools. ．500lb. Weight Capacity． Featuring a portable and lightweight design, this tool stand flaunts an impressive 500lb capacity – effectively able to support many of your benchtop tools, powertool supplies and woodworking accessories. Expandable MDF Split Top with Ruled Surface: 14” x 25”, expands to 20” x 25” ．One Adjustable Foot． Hardware is supplied to make one of the feet adjustable. Insert the screw head into the pad, and thread the nut onto the screw. Assemble the foot, flat washer and nut inset. NOTE: Adjust the foot by moving the nut on the screw up or down. If needed the feet can be interchanged to place the adjustable foot on any leg. Comes with easy-to-read instructions for a quick and straightforward assembly. Features dual shelves to provide additional storage and support to accommodate your needs. Possesses a heavy gauge steel construction to give you a sturdy frame with durability. Tool stand is portable and lite enough to move around your workshop with ease. Equipped with rubber, non-skid foot pads that are non-marring to help protect your floors and workshop surfaces.
- INCLUDES: (1) Universal Power Tool Stand
- APPLICATION: Ideal for supporting a variety of smaller, compact bench-top machines, power tools and accessories, while giving you a sturdy, yet small and dependable work surface
- FEATURES: 500 pound load capacity to accommodate a wide assortment of tools and equipment, adjustable foot pad for stability and a heavy gauge metal base powder coat finish for long-term durability
- NON-MARRING: Equipped with rubber feet that not only reduce equipment vibration, but they offer an anti-slip, skid free and non-abrasive profile that protects your floor for scuffs and scrapes
- DIMENSIONS: 32-Inch working height. 18″ x 27″ storage shelf, 14” x 25” expandable MDF split top with ruled surface (expands to 20”x25”)
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 23 lbs |
|---|---|
| Dimensions | 32.00 × 10.00 × 3.50 in |
| Color Family | Black |
| Model | UT1002 |
| Power Tool Accessory Type | Other Accessory |
| Table Height (in.) | 32 |
| Table Length (in.) | 14 |
| Table Width (in.) | 15 |
| Tool Stand Features | Universal |
| Tool Stand Type | Router Table |
| Tools Product Type | Power Tool |
Reviews (85)
85 reviews for POWERTEC Heavy-Duty Universal Tool Stand
Only logged in customers who have purchased this product may leave a review.
Related products
Tool Stands
DEWALT 29 lbs. Heavy Duty Miter Saw Stand with 500 lbs. Capacity
Model# DWX723
Tool Stands
Model# DW7028
Tool Stands
Model# 46-462
Tool Stands
Model# DW7440RS
Tool Stands
Model# RK9002
Tool Stands
Model# 50-025
Tool Stands
DEWALT Scroll Saw Stand with All-Metal Contruction & Adjustable Legs
Model# DW7880
Tool Stands
DEWALT 29.8 lbs. Compact Miter Saw Stand with 500 lbs. Capacity
Model# DWX724
Jacques Schuster (verified owner) –
I bought this to hold a drill press. As others have said, it’s a reasonably solid stand and a bargain. Those who want a bit more stability or load capacity can add a plywood top and/or some extra washers and screws, but if properly assembled the MDF top should be fine for most purposes without modification. I’d give it five stars except for a couple of issues.First of all, the supplied hardware just isn’t good enough. They supply Phillips head screws but good luck getting the bolts tight with those! It can be done, but only with too much effort. Often people don’t get the nuts tight and then complain that the stand is wobbly. People who build more than one of these say they use their own hex head screws and I would have done that if I had known. Also, the instructions have a mistake in them — they tell you to put the lower shelves in *after* it’s assembled, but with all four cross pieces in place the bottom shelves won’t fit! This has led several people to saw the shelves down. In fact, you have to put the shelves in when one of the short side cross pieces is still off — then the cross piece can be slid up from the bottom and everything fits well.The illustrations are also too small and the instructions aren’t always super clear, though not horrible and I was able to figure things out when they were ambiguous.Finally, for those who are asking about casters, Powertec sells a retracting caster kit that attaches to the slanted legs for about $50. You can also fit regular casters in the holes in the plastic feet, but I’m not sure how much weight the feet would take.
Aiden Kunde (verified owner) –
Works well with my router table. Perfect height for me.
Alene Cummings (verified owner) –
This is my second purchase of the same stand and I’m still happy with the first one which has been up and running since early September so there ya go 🙂
Nora Stehr (verified owner) –
As advertised but a little time to assemble. Works great for my drill press and Dremel belt sander
Mason Collins (verified owner) –
I ordered this stand for my drill press and it met and exceeded my expectations
Verona Monahan (verified owner) –
The stand went together quickly. Just follow the instructions and look at the pictures. The shelf boards had to be beat into submission to fall into place. I drilled the leg ends for 1/2″ stemmed casters with locks.
Mia Reilly (verified owner) –
Easy to assemble. The shelf boards are worthless but just replaced them with stronger plywood.
Bartholome Weimann (verified owner) –
A bit cumbersome to assemble but other than that a good solid bench for the right price.
Darron Deckow (verified owner) –
The top and shelf are MDF and feel a little thin. However, they are easily replaced with better quality wood.The material on the legs also feels a bit thin, but the stand seems to be sturdy once set up.Can be improved, but it is excellent for the price.
Talon Funk (verified owner) –
5 STARS
Terrill Bogan (verified owner) –
Easy to assemble, everything fit pretty well except the middle shelf which, after I put everything together, I had to trim 1/8th inch off
Antonia Auer (verified owner) –
good quality stand, good price… seems durable
Conrad Larkin (verified owner) –
The assembly took two sets of hands, but when it came together it was very sturdyand attractive. Perfect for the lathe I built it for. Thank you.
Dewitt Kemmer (verified owner) –
Perfect for my Miter & Cutoff !
Romaine Kshlerin (verified owner) –
exactly what I was looking for to hold my dress press and it’s new table. I will order another one to hold my planner.
Oleta Haag (verified owner) –
The product is just as advertised. If the directions are followed, the stand assembles easily. Everything fit well. It is important to follow the instruction to not righten the bolts until the assembly is complete. It is surprisingly strong for being relatively light in weight. I would purchase it again.
Alba Crooks (verified owner) –
fit well, easy to assemble, strong. Nice product
Mylene Feil (verified owner) –
Quick easy assembly. More than capable of holding my drill press. Accomplished exactly what I wanted, places my drill press at a workable height.
Sabryna Heller (verified owner) –
Perfect stand for my miter saw
Taryn Morar (verified owner) –
Performed as expected.