QEP 1/4 in. Pro Wet/Dry Diamond Hole Saw
$17.82
Ensure easy, fast and accurate cutting of porcelain, ceramic and glass tiles with the selection of this durable QEP Pro Wet or Dry Diamond Hole Saw.
In stock
Description
The QEP 1/4 in. Wet/Dry Diamond Hole Saw is designed for the easy, fast and accurate cutting of porcelain, ceramic and glass tiles. This hole saw features a special diamond grit edge for faster and smoother cuts, while using less water than conventional diamond drill bits. Simply dip the hole saw into water and drill the desired hole for professional quality and results.
- Ideal for cutting 1/4 in. holes in ceramic, porcelain and glass tiles with minimal water use
- Advanced metallurgical technology bonds diamond grit to chrome alloy steel base to produce a long-lasting cutting edge
- Extremely durable and built to last longer than conventional diamond drill bits and standard hole saws
- 12 times longer lasting than standard hole saws
- Simply dip in water, no need for a constant water delivery system, for quick and easy use
- Flexibility to be used in wet or dry cutting conditions is preferred by professional flooring installers
- Easy to clean by rinsing with hose or in clean water after each use
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 0.025 lbs |
|---|---|
| Dimensions | 0.75 × 2.75 × 7.00 in |
| Blade Length (in.) | 0.75 in |
| Blade Material | Diamond |
| Blade Width (in.) | 0.25 |
| Hand Tool Type | Blade |
| Individual/Set | Individual |
| Model | 10075 |
| Number of Pieces | 1 |
| Product Length (in.) | 0.25 in |
| Replacement Blade Type | Fixed Blade |
| Teeth Per Inch | 0 |
| Tools Product Type | Power Tool |
Reviews (57)
57 reviews for QEP 1/4 in. Pro Wet/Dry Diamond Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Knives & Blades
Model# DWHT10045
Knives & Blades
Model# 11-301L
Knives & Blades
QEP 8 in. Carbon Steel Replacement Blades for Floor Scraper and Striper (3-Pack)
Model# 62904Q
Knives & Blades
Model# 44131
Knives & Blades
Model# 10-788
Knives & Blades
Model# RK-7
Knives & Blades
Model# 10-189C
Knives & Blades
Model# 11-931A
Helena Heathcote (verified owner) –
Works great also start hole with carbide tip bit then drill through with this bit makes your work faster and easier
Joseph Heaney (verified owner) –
I have used this tool for many application where ceramic or glass must be cut. In all applications the tool works well.
Zetta Koelpin (verified owner) –
I used about 3-4 of these per year, sometimes I let my helpers use itThey tend to “learn” by burning the tool up….keep it wet, and let the tool do the work, it works finelet it dry out, or horse the tool around too much and you will cook it quickly
Mathew Pacocha (verified owner) –
Let me say that the diamond drill was excellent, but I had never used one before. I was drilling porcelain tile. The 45 degree starting angle was tricky for me. But it was my inexperience, not the drill. The drill does a great job. It is not recommended to drill very deep, maybe a 1/2″ total. Do keep it watered while drilling to keep it cool.
Kaleb Hartmann (verified owner) –
I went through 2 other diamond bits trying to drill a single hole in porcelain tile—until I finally bought this bit. Just move the bit around in a small circular motion—and it will work itself through in no time. Very satisfied.
Raleigh Emard (verified owner) –
It’s awesome
Constance Padberg (verified owner) –
This was just what I was looking for to drill through ceramic tile to anchor shower rod. Highly recommend this product.
Philip Jast (verified owner) –
It works well
Josh Larkin (verified owner) –
I was so scared that I would crack my ceramic tile when making holes to mount the grab bar in my shower. This little blue colored diamond hole saw made my fears go away. You use it like any other drill bit in your drill. However, you dip it it he tip in water before starting and about every 5 seconds while drilling through the tile. No need for running water for cooling. The tip is held at an angle to get the first little cut in the tile. Once you have that, it will keep the hole saw from slipping and scratching the tile. Then you can drill at the customary 90 degrees., perpendicular to the tile. Use light pressure while gently oscillating the drill while it is making the hole. You’ll need to dip the saw tip in water every 5 seconds to cool things down. This works and doesn’t crack the tile.
Harmony Considine (verified owner) –
Used this on porcelain tile, found the right speed was not to fast. Cleaning it out could be easier.
Teagan Kiehn (verified owner) –
Only lasted for two holes kinda pricey for two holes
Marvin Flatley (verified owner) –
Was it easy to place holes in porcelain tile.Will buy again
Xzavier Kuphal (verified owner) –
One of the toughest jobs to do is drill a straight clean hole in your ceramic tile. If you’re installing a new shower door or a shelf in the shower, this bit is what you need to get the job done. The diamond chips make cutting through the glaze layer very easy. Important to follow the instructions carefully. Holding the bit at an angle to get started takes some practice, but once you start through the glaze, ease up to perpendicular and you’re home free. A helpful tip, I take an old sponge put a hole in it, soak up some water. Once I start drilling I slip the bit through the hole in the sponge and use the water to keep the bit cool. This will extend the bit life. Once through the glaze layer the bit goes through very easily. You’ll have a nice clean hole to put your anchors in.
Fausto Baumbach (verified owner) –
This bit cut through porcelain tile better than all my other bits. Do have to keep it cool.
Pamela Streich (verified owner) –
Good
Justice Pollich (verified owner) –
the better grade hole saw was worth the money but the cheaper one didn”t even drill one hole before it was burnt out
Estefania Jaskolski (verified owner) –
Great quality. Good price. Cuts through both the plastic surround and the ceramic tile behind it, to mount the shower hangers.
Nasir Goodwin (verified owner) –
Took a little longer to get through porcelain than I thought it would. However, it didn’t wander like mason bits once it gets started. The first QEP diamond bit I tried was the one that came in the kit that had the reservoir for wet drilling. The diamond tip disintegrated within 10 seconds leaving a beautiful sparkling mess.
Hassan Zieme (verified owner) –
The QEP 1/4 in. Pro Wet/Dry Diamond Drill Bit has a small cylindrical stem 2-1/4 inch long. On one end around the edge is a brazed diamond coating that cuts through porcelain, ceramic and glass. They recommend a quick dip in water before starting to increase the bits durability and to dissipate heat. First start at a 45 degree tilt until scoring the material and move to finish the cut at 90 degrees using high RPM. It seemed simple enough so I tried it first on a test tile. The drill seems to cut in a deliberate fashion at its own rate. It makes a small doughnut around the circumference of the hole and the center material goes into the center of the cylindrical drill stem and later pops out. It made easy work of the tile and cut a clean hole. This is a good drill to have in cutting screw holes for mounting fixtures such as towel racks to a tile wall.
Manley Botsford (verified owner) –
Bought a couple bits expecting trouble. Used the guide and this bit to cut porceline very nicely. (It was a “made in UK bit.) The china one wouldn’t scratch the tile though.