QEP 1-3/8 in. Pro Wet/Dry Diamond Hole Saw
$31.47
Complete your tile installing work perfectly and professionally with the assistance of this amazing QEP 13/ Pro Wet/Dry Diamond Hole Saw.
In stock
Description
The QEP 1-3/8 in. Wet/Dry Diamond Hole Saw is designed for the easy, fast and accurate cutting of porcelain, ceramic and glass tiles. This hole saw features a special diamond grit edge for faster and smoother cuts, while using less water than conventional diamond drill bits. Simply dip the hole saw into water and drill the desired hole for professional quality and results.
- Ideal for cutting 1-3/8 in. holes in ceramic, porcelain and glass tiles with minimal water use
- Advanced metallurgical technology bonds diamond grit to chrome alloy steel base to produce a long-lasting cutting edge
- Extremely durable and built to last longer than conventional diamond drill bits and standard hole saws
- 12 times longer lasting than standard hole saws
- Side hole for easy plug removal after drilling
- Simply dip in water, no need for a constant water delivery system, for quick and easy use
- Flexibility to be used in wet or dry cutting conditions is preferred by professional flooring installers
- Easy to clean by rinsing with hose or in clean water after each use
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 0.137 lbs |
|---|---|
| Dimensions | 1.75 × 2.75 × 7.00 in |
| Blade Length (in.) | 1.375 in |
| Blade Material | Diamond |
| Blade Width (in.) | 1.375 |
| Hand Tool Type | Blade |
| Individual/Set | Individual |
| Model | 10087 |
| Number of Pieces | 1 |
| Product Length (in.) | 1.375 in |
| Replacement Blade Type | Fixed Blade |
| Teeth Per Inch | 0 |
| Tools Product Type | Power Tool |
Reviews (62)
62 reviews for QEP 1-3/8 in. Pro Wet/Dry Diamond Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Knives & Blades
Model# RK-7
Knives & Blades
Model# 84-519K
Knives & Blades
Model# 11-301L
Knives & Blades
Stanley Surform 5-1/2 in. Pocket Fine-Cut Plane Blade Replacement for 21-399
Model# 21-398
Knives & Blades
Model# 12-313
Knives & Blades
Model# 10-989
Knives & Blades
Stanley 1992 Heavy Duty Utility Blades with Dispenser (50-Pack)
Model# 11-921L
Knives & Blades
Model# 48036
Reed Murazik (verified owner) –
Cuts great dry but wears out quick. I only cut 2 holes through porcelain tile before it started to wear down. Use of water helps last longer. As far as cutting it cuts clean and fairly quickly for the price
Onie Kautzer (verified owner) –
Did a great job on ceramic and porcelain tile.
Lance Kautzer (verified owner) –
Let’s not forget your not buying a boring machine so don’t expect this to act like one. This is the second one of these I’ve had and used up the first after numerous jobs. I drilled a hole just yesterday on some softer clay tile, but have used it one porcelain. Three key points: Start the cut at just the slightest of angles or it will want to walk on you, and use water to keep down the dust. Start the cut before using a lubricant as you will lose the friction of the initial groove and then when started just a little. Remember this is not a commercial billion dollar bit so go slow. It will cut just as fast and it won’t be so hard on your body. As in all diamond coated blades/bits they are only made for a limited amount of cuts so you’re not buying a bit that you think should last forever but it will be cheaper than marking your pieces and taking them to a masonry. A better bit than others of it’s kind I have bought over the years.
Lura Rolfson (verified owner) –
Great cutting ability!!! But the blue color comes off and stained my grout!!!!
Valerie Rosenbaum (verified owner) –
Made a perfect round hole easily through ceramic tile.
Marlon Bins (verified owner) –
Good for applications intended
Luisa Spencer (verified owner) –
The drill cut really well and did not a walk
Elza Rodriguez (verified owner) –
Worked great for the money.
Megane VonRueden (verified owner) –
It’s good to cut perfect but to start the hole it’s not that comfortable wieh it had a pilot but to help hold steady.
Adrien Kautzer (verified owner) –
Excellent in cut ceramic make your shop like a pro
Astrid Gutkowski (verified owner) –
Gets the job done
Janis Collier (verified owner) –
The hole works great either wet or dry, making easy work of drilling plumbing holes. I would recommend this home bit to anyone working with tiles.
Helena Kuhic (verified owner) –
This cut the tile nicely. Was easy to use did not get much bounce off the tile as I started the hole. Hopefully it will last only time will tell.
Enrico Bernhard (verified owner) –
I spent an hour trying to drill a bunch of pilot holes / use a dremel to cut a hole in porcelein tile for a shower spout, but ultimately gave up and bought this thing which zipped through in 60 seconds.
Will Simonis (verified owner) –
I am a professional tile installer with 20 years of experience installing tile daily. I have tried just about ever tile tool on the market and thrown most in the trash. This is the only hole saw I have ever owned that not just works but lasts quite a while. When cared for and not overheated we get approx 20-30 holes through high quality porcelain floor tile. It can drill a hole through 3/8th thick vitrified in about 45 seconds. The trick is to rock the saw in an orbital motion as you cut and it will cut faster.
Abby Moen (verified owner) –
I can’t believe how smooth this product worked! It truly amazed me!!!It was like slicing butter. No cracks no breakages , just press very softly and let the tool do it’s job
Ottilie Kassulke (verified owner) –
worked as described, I have only used it 2x but it seems like it will drill many more holes
Autumn Wuckert (verified owner) –
Excelent
Hermann Bergstrom (verified owner) –
put in a drill press, cut hole no problem in ceramic tile. nice and clean hole even on edge of tile.
Americo Hirthe (verified owner) –
This was easy too use. Just need too practice with it on some scrap pieces first. I would start at an angle and slowly move it to a straight position.