RIDGID Oscillating Edge/Belt Spindle Sander
$269.00
This RIDGID Oscillating Edge and Belt Spindle Sander offers convenient onboard storage for parts and its oscillating, rotary motion sands edges, with ease.
In stock
Description
RIDGID introduces the Oscillating Edge/Belt Spindle Sander. Constructed as two tools in one, the RIDGID Oscillating Edge/Belt Spindle Sander operates with rotary and oscillating motion to help you effortlessly achieve burn-free finishes on edges, contours, faces, inside curves and outside curves. The tool-free conversion from belt to spindle helps you quickly and easily make changes, so you can complete multiple jobs in the time it would take for one. The onboard accessory storage neatly holds the belt mechanism, washers, and more for user convenience. Backed by the RIDGID Lifetime Service Agreement, this Oscillating Edge/Belt Spindle Sander includes an already installed 4 in. x 24 in. sanding belt and operator’s manual.
- Includes a 4 in. x 24 in. belt, all drums and a set of sleeves
- 5 Amp, 3/8 hp motor to supply power for high performance and excellent results
- Up to 1725 RPM spindle speed
- 60 OPM for speedy sanding action
- Ball bearing construction for smooth operation and longevity
- Built-in sawdust collection port to help keep your workspace and air clean
- Lockout power switch to help prevent unintentional activation
- 8 ft. cord for long reach to where you need it
- Table that tilts up to 48 Degree with detents at the most popular angles (0 Degree, 15 Degree, 22.5 Degree, 30 Degree and 45 Degree) to sand bevel edges
- Lifetime Service Agreement with registration within 90 days of purchase
- Includes: (1) EB4424 Oscillating Edge/Belt Spindle Sander with attached 4 in. x 24 in. sanding belt and operator’s manual
- RIDGID: Powerful. Durable. Professional.
- Note: product may vary by store
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 46.82 lbs |
|---|---|
| Dimensions | 22.80 × 18.80 × 19.68 in |
| Amperage (amps) | 5 |
| Bench & Stationary Tool Type | Specialty Sander |
| Color Family | Orange |
| Condition | New |
| Cord Length (ft.) | 6 |
| Dust collection type | Port |
| Model | EB4424 |
| Portability | Bench |
| Power Tool Features | Lockout Power Switch |
| Reconditioned | No |
| Tools Product Type | Power Tool |
| Variable Speed | No |
| Voltage (volts) | 120 |
Reviews (86)
86 reviews for RIDGID Oscillating Edge/Belt Spindle Sander
Only logged in customers who have purchased this product may leave a review.
Related products
Sanders
Model# R25011
Sanders
Model# 7345
Sanders
Model# MS2000
Rodger Kovacek (verified owner) –
I’ve only had this a few weeks but it does what I need it to do. I’m very happy with it at this point!
Theresia Hahn (verified owner) –
I just received the Ridgid oscillating belt sander a month ago and initially I couldn’t get the spindle sander drums to stay tight. The belt sander worked well from the start. The rubber drums appeared to be too short and couldn’t be tightened. I live about an hour away from Home Depot and didn’t want to go through the hassle of returning it, so I used two large washers with an ID that were just a bit larger than the drive spindle. One washer wasn’t enough. Now I can tighten it up so the rubber drum expands and holds the sanding drum in place. The OD on the washers extends past the spindle sanding drums and will interfere with a taller work piece so I’ll have to come up with a different solution when that happens. Disappointing to buy a new tool and not have it work out of the box.
Muriel Thiel (verified owner) –
i have only used it a couple of times since i received it a month ago easy set up even the drop table was true 90 degrees have not checked the 45 degree yet but would recommend.
Holden Zboncak (verified owner) –
I think I’ve had this for about 10 years (Maybe more). I can’t imagine not having it. Rock solid, never had a problem with it, and it gets a lot of use.The only issue I have had is the nut that tightens the spindle down comes loose during heavy use, but that was easy enough to fix with a little blue locktite. The original drum paper lasted a long time before they wore out.I’ve gone through far more belts than drum paper.Dust collection is pretty good. With a vacuum it gets 85-90% of dust. with a dust collector and a second hose by the wide end of the drum it gets 98%.I have it on it’s own wheeled cabinet, so I can store all the different grit belts underneath.If it ever breaks I would not hesitate to buy another one.
Jess Mertz (verified owner) –
Bought this 5years ago. Have used for DIY projects, wood floors, trim and a bathroom. The sander was used for cleaning, shaping and initial polish of marble tiles. The orbital sander was excellent for adjusting cutouts for plumbing in the tiles. The ability to set the face angle and tickle parts for precise joints is a major time saver. I use a vacuum to remove dust during use either via the vacuum port or taped to the bed in the case of the tile work. The portability of the unit means you can take it to the work which is a big deal. I have recommended this to many friends and colleagues, it that good.
Loy Senger (verified owner) –
I like dis berry berry much. It have bin berry berry good to me