RIDGID 6 Amp Corded 6-1/8 in. Jointer/Planer
$699.00
Take your woodworking project to the next level with this RIDGID Corded Jointer Or Planer. Features a heavy duty induction motor.
In stock
Description
RIDGID introduces the 6 Amp Corded 6-1/8 in. Jointer/Planer. Durably made, it features a heavy duty induction motor that is totally enclosed to help prevent sawdust contamination. Considerably quiet for its 1 HP motor, it makes smooth cuts safely with the assist of a blade guard and push blocks. Its versatile dual bevel fence features stops at 45°, 90°, and 135°. The tool sits atop a rugged, wide-stance cabinet with on-board storage for blade alignment tools and accessories. A long, handy, 45 in. tabletop gives greater support to large pieces. Backed by the Industry Leading Lifetime Service Agreement, the 6 Amp 6-1/8 in. Jointer/Planer includes a steel cabinet and an operator’s manual.
- 6-1/8 in. maximum cutting width
- 1 HP, 3450 RPM, heavy duty induction motor operates at 120-Volt or 240-Volt
- Dimensions: 45.5 in. L x 31.25 in. H x 19 in. D; weighs 208 lbs.
- Dual bevel fence with stops at 45°, 90°, and 135°
- Belt drive delivers smooth, consistent power
- Machine-ground surfaces for precise jointing/planning
- Easy-to-assemble with a rugged cast-iron base to minimize vibration
- Rabbeting ledge for precise rabbets up to 1/2 in. deep, adjustable front and rear tables
- Fan cooled for longer life
- Convenient 4 in. dust port quickly slides out of the way when not in use
- Lifetime Service Agreement with registration within 90 days of purchase
- Includes: (1) JP0610 6-Amp 6-1/8 in. Jointer/Planer with steel cabinet and operator’s manual
- RIDGID: Powerful. Durable. Professional.
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 207.22 lbs |
|---|---|
| Dimensions | 55.90 × 22.44 × 16.54 in |
| Amperage (amps) | 6 |
| Maximum Board Thickness | 6.13 in |
| Portability | Stationary |
| Number of Cutting Blades | 3 |
| Model | JP0610 |
| Minimum cut depth (in.) | .03125 |
| Maximum cut depth (in.) | .125 |
| Maximum Speed (rpm) | 3450 |
| Condition | New |
| Assembled Depth (in.) | 55.90 in |
| Color/Finish | Orange |
| Color Family | Orange |
| Blade(s) Included | Yes |
| Bench & Stationary Tool Type | Planer |
| Assembled Width (in.) | 22.44 in |
| Assembled Height (in.) | 16.54 in |
| Tools Product Type | Power Tool |
Reviews (81)
81 reviews for RIDGID 6 Amp Corded 6-1/8 in. Jointer/Planer
Only logged in customers who have purchased this product may leave a review.
Related products
Woodworking Tools
Model# DW735
Woodworking Tools
DEWALT 11 Amp Corded 1-3/4 Horsepower Fixed Base / Plunge Router Combo Kit
Model# DW616PK
Woodworking Tools
Model# 708620B
Woodworking Tools
Model# DW680K
Woodworking Tools
Model# DW616
Woodworking Tools
Model# 5625-20
Woodworking Tools
Jet 1/2 HP Benchtop Mortise Machine 115-Volt 1/2 in. Capacity JBM-5
Model# 708580
Woodworking Tools
Bosch 12 Amp 2-1/4 in. Corded Peak Variable Speed Plunge and Fixed Base Router Kit with Hard Case
Model# 1617EVSPK
Buster Schroeder (verified owner) –
Best six hundred bucks I have ever spent on a tool. Assembly was easy enough. An makes all my rough lumber flat and square. Wish I would have bought sooner.
Jalyn Feest (verified owner) –
Took 2 people to out together
Major Quigley (verified owner) –
Great jointer/ planer! Solid, works as advertised.
Maida Bechtelar (verified owner) –
Assembly was easy, and the width is a must have. Excellent for the $ !
Schuyler O’Connell (verified owner) –
This is a good product and I have made extensive use of it so far. If I have a complaint the dust collection is not great. But the build was straight forward although most likely you will need two people
Elise Kertzmann (verified owner) –
This the best jointer under 1k..assembly was easy, came in a timely manner
Zack Rosenbaum (verified owner) –
Jointer is quiet and was set from the factory for Co-planer. Adjusting the depth of cut is easy. In and out feed tables are a little short but manageable. I ended up using a roller stand to catch the stock after it leaves the out feed table. Feed rate has to be fairly slow to keep from getting to bad of scallops. Used it on walnut, cherry, maple, Purple Heart and pine totaling about 50 linear feet through it. Most of which was walnut and maple. If you don’t have a dust collection system the shavings will not discharge and clog it. So far it’s done fine.
Modesta Towne (verified owner) –
Everything went together well. Easy to follow directions and fairly straight forward assembly. Blades had knick in them out of the box, unfortunately, which was disappointing.
Dallas D’Amore (verified owner) –
Ridgid takes too long to register for lifetime warrantee
Kathryn Cormier (verified owner) –
Easy assembly and setup. Works well for the price.
Ceasar Wuckert (verified owner) –
Awesome does awesome job there no other in the market better
Dayne Wilkinson (verified owner) –
I have been using Ridgid power tools for nearly 25 years. My entire shop is equipped with Ridgid tools. This planer / jointer is a pro quality tool that will do the job for many years to come. The warranty is second to none.
Elias Dietrich (verified owner) –
Worked great, as expected
Sienna Marvin (verified owner) –
The only decent planer/jointer in that price range. Couple that with free delivery and lifetime warranty; unbeatable.
Demond Rippin (verified owner) –
The Ridgid Jointer is a very good entry level jointer. The jointer was easy to put together. The instructions were very helpful and well written. Assembly does require two people. It wasn’t difficult to get it square. The only cons are the plastic angle setup tool is useless and the height is on the shorter side. I built a mobile base from 2x4s to raise the jointer.
Bethany Haag (verified owner) –
Assembly took some work, but it functions perfectly.
Ettie Durgan (verified owner) –
It’s just great, it runs smoothly and isn’t really loud. Easy to use, easy to assemble and really easy to calibrate. But it’s heavy so be careful when assembly don’t hurt your back.
Verdie Hessel (verified owner) –
Very solidly built and stable. Easy to assemble with good directions. Very quiet when operating with multiple adjustment options for different tasks.
Aron Grant (verified owner) –
Assembly was complicated by the unclear instructions. However, this is a solid and well-built jointer. Cutting surface is made of cast iron, so the jointer is very heavy (over 200 lbs). I ordered a set of casters from a third party manufacturer which makes the jointer very portable and easy to move around the garage. Also replaced the 3-knife cutter head with a “shelix” helical cutter head ($310) from byrd tools to improve the cut quality and reduce noise during cutting. Awesome tool for facing rough cut wood with a flat surface.
Katherine Tremblay (verified owner) –
Great product for the price. Spend time on the set up and alignment, and it will cut great.