RIDGID JobMax 3/8 in. Drill/Driver Head (Tool Only)
$49.97
This RIDGID helps solve close-quarter drilling and driving problems commonly found on the jobsite through JobMax Drill and Driver Head.
In stock
Description
This RIDGID JobMax 3/8 in. 12-Volt Cordless Drill/Driver Head features a variable speed motor that generates up to 550 RPM and 120 in. lbs. of torque. A right-angle head design helps solve close-quarter drilling and driving problems commonly found on the job site. A 3/8 in. single-sleeve chuck holds bits tightly and securely. The lightweight head uses lithium-ion batteries that recharge in 30 minutes to save down time.
- Over 550 RPM and 120 in. lbs. of torque packed into a 12-Volt tool
- 4 directional head positions let you adjust for better access in tight spaces
- Variable speed motor
- Compact right-angle design allows for precise control in close quarters
- Battery and charger not included
- 3-year warranty and lifetime service agreement with tool registration
- Lightweight for easy control and maneuverability
- JobMax power base accepts this drill driver attachment as well as 4 power tool heads
- Batteries and charger not included
- UL listed
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 1.910 lbs |
|---|---|
| Dimensions | 6.60 × 3.40 × 5.00 in |
| Amperage (amps) | 0.0 A |
| Chuck Size | 3/8 In. |
| Chuck Type | Keyless |
| Color Family | Orange |
| Condition | New |
| Cord Length (ft.) | 0.0 |
| Corded Tool Type | Right Angle Drill |
| Cordless/ Corded | Cordless |
| Drill/ Driver Type | Right Angle Drill |
| Included | No Additional Items Included |
| Maximum Speed (RPM) | 550 RPM |
| Model | R8223402 |
| Power Tool Features | No Additional Features |
| Tools Product Type | Power Tool |
Reviews (82)
82 reviews for RIDGID JobMax 3/8 in. Drill/Driver Head (Tool Only)
Only logged in customers who have purchased this product may leave a review.
Related products
Drills
Model# 0233-20
Drills
Model# DA4031
Drills
Milwaukee 7.5 Amp Corded 1/2 in. Pistol Grip 2-Speed Hammer Drill
Model# 5378-20
Drills
Model# 285703
Drills
Model# 11263EVS
Drills
Model# 1007-1
Kiara Ritchie (verified owner) –
Neat little attachment. Adds more versatility to the Job Max.
Gerald Schumm (verified owner) –
This is great for getting in to tight spaces and even the work light on the base unit works very well with it. It’s missing two things..1) It is single speed gear box at a max of 500 RPM… this is great for power and turns the 20,000 rpm of the base unit into a real powerhouse of a 3/8ths drill but needs a two-speed gear box.2) It has no torque clutch which makes using it as a 90* driver a bit risky as to running the fastener too deep… BUT, then again, the slow speed does help in that department… It needs an adjustable clutch.
Jaylan Schultz (verified owner) –
Bought for the hubby for Christmas and he loves it. Lightweight and it’s awesome that’s its interchangeable with the ryobi jobmax tool
Merlin Orn (verified owner) –
I really enjoy that drill head. It’s handy and goes everywhere that some other won’t go… Slow but safe…
Kaylah Zulauf (verified owner) –
This attachment worked great in an area that I could not reach with my regular drill.
Dena Doyle (verified owner) –
This fits my Ryobi JobPlus base tool. Upon receiving this I drilled a 3/8″ hole through a PT 2×4 with no effort. I then drove a 1/2″ lag into the hole. Again, no problem. The keyless chuck is large to provide a good grip. The right angle drill head speed runs according to the speed of your tool base. It only is variable speed and reversible if your base tool has variable speed and reverse. For really tight spaces get yourself some stubby drills bits or cut down the shanks of standard drill bits. This will fit into 1/2 the space of a typical hand drill. Cheaper than buying a separate right angle drill. Recommended. Don’t forget to register it with Rigid.
Maurine Hartmann (verified owner) –
Needed a right angle drill to go through a ceiling joist to wire new recessed lighting. Already had a Ryobi multi tool so instead of buying a whole new drill for $69 I got just the Rigid head for $44. Saved 25 bucks and it worked perfectly. Very easy to switch the multi tool heads.
Blair Hermiston (verified owner) –
The Jobmax may be small but it has the ability to do so much
Janis Kunde (verified owner) –
so far so good. really compact and nimble.
Mckenna Feest (verified owner) –
It works but it’s kind of dificult to get the head on and off my multi tool. I’m sure it will get easier as it gets worn in a little.
Woodrow Moen (verified owner) –
This drill was easy to attach to my job max.
Herminia Rempel (verified owner) –
Perfect for what I needed it for.
Adolphus Schiller (verified owner) –
The 180 degree ability. Coupled with already having a right angle built in. Makes it versatile.
Maybelle Hahn (verified owner) –
The JobMax is an incredible tool system and this head just adds to the options and usefulness of the tool. This would not be what you want if you were say, building cabinets, but for assembly’s or repairs it’s perfect.
Kaci Bechtelar (verified owner) –
Easy to use works great
Jailyn Spinka (verified owner) –
Haven’t used it yet but fits my Ryobi multi tool and seems to be as I expected.
Elyse Flatley (verified owner) –
No powerful but he works for easy jobs nevertheless do not expect too much
Joana Barrows (verified owner) –
This is an extremely useful extension for the JobMax tool. It allowed work in a tight situation where a normal drill would not fit.
Raegan Parisian (verified owner) –
Works great!
Trent Welch (verified owner) –
Great tool