RIDGID Hybrid GEN5X Universal Collapsible Tripod Lighting Stand with (4) 1/4 in.-20 Threads for Mounting
$87.00
Introduce a versatile device to your workstation with the choice of this extra ordinary RIDGID 2-Hybrid GEN Universal Collapsible Tripod Lighting Stand with for Mounting. Base is machined to hold the 3 bit set.
In stock
Description
RIDGID introduces the GEN5X 18-Volt Universal Collapsible Tripod Stand. This light can hold up to 3 lights at one time. It has four 1/4-20 threads. The collapsible design and handle make it easy to transport to and from the jobsite.
- Maximum holding power-uses 4 mounting points to hold up to 3 lights at one time
- Maximum reach-telescoping rod reaches up to 7 ft. H to illuminate hard-to-reach areas
- Collapsible design-for easy storage and transportation
- Cam lock design-stabilizes the light when rod is extended
- Extreme stability-on-board bubble level, ballast hooks and adjustable leg keep the stand secure on the jobsite
- On-board handle-for easy maneuvering on the jobsite
- Rugged design-durable, lightweight material designed to withstand tough jobsite conditions
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 12.43 lbs |
|---|---|
| Dimensions | 36.02 × 6.89 × 8.27 in |
| Color Family | Orange |
| Ideally Used With | Cordless Tool |
| Material | Plastic |
| Model | R9937B |
| Power Tool Accessory Type | Other Accessory |
| Product Length (in.) | 30.00 in |
| Tools Product Type | Power Tool |
Reviews (83)
83 reviews for RIDGID Hybrid GEN5X Universal Collapsible Tripod Lighting Stand with (4) 1/4 in.-20 Threads for Mounting
Only logged in customers who have purchased this product may leave a review.
Related products
Specialty Power Tool Accessories
Model# 49-16-2668
Specialty Power Tool Accessories
Model# 28600
Specialty Power Tool Accessories
Model# RS035
Specialty Power Tool Accessories
SKILSAW Brush and Cap Assembly for Corded Wormdrive Circular Saws
Model# 95111L
Specialty Power Tool Accessories
Model# GM00001381
Specialty Power Tool Accessories
Model# EA0297
Specialty Power Tool Accessories
Model# TWX7RTK
Specialty Power Tool Accessories
Model# 53871
Bert Thompson (verified owner) –
Love how high it goes.. opens and closes easy..i have two lights on it now .. still get another soon
Duncan Jacobi (verified owner) –
I’ve been looking for this for a while and finally my local Home Depot had one. I bought the unit and while unboxing it , the level fell out of the box. Noticed that it was at one point glued into its recess. No big deal really, just glued it back in. Just a little disappointed that the last two Ridgid items I purchased had one small issue each. Overall, I love Ridgid tools but expected better.
Kyleigh Beatty (verified owner) –
I have two Hybrid GEN5X Cordless Folding Panel Lights, and a GEN5X 18-Volt Dual-Power Light Cannon, that I can mount on this tripod.The tripod has four On-board 1/4-20 thread studs that these lights (and most Cameras incidentally). Three are on the adjustable arms One more on the center axis adjustment, which can be used independently,The tripod ca be telescoped up to 7 feet. It is stable but most in the lowest position. The dynamics of stability change with the heavy lights out on those three arms. I removed those and use the single threaded attachment from the center axis adjustment,I found the cams need a very slight adjustment to tighten enough to prevent slipping on the telescoping post. It requires a 3mm allen wrench. No big deal.The three legs extend outwards and can be adjusted from a narrow stance to a wider 30″ wide stance. One leg has an adjustable leg extension to place the post in a plumb attitude. and to help do that it has an onboard 360 degree bubble level on the end of of the carry handle.I like the tripod and the 18 volt battery / 110 volt hybrid LED lights for a quick, bright light source when I need it.To add to stability there are a few choices to hang sand bags, one specifically to do so near lower end of the center post.
Marcel Bradtke (verified owner) –
It seems to be a very sturdy, heavy duty tripod. Very easy to open and extend. A very good buy for the money!!
Wendell Hills (verified owner) –
Love it, didn’t expect anything less than great from RIDGID!!!
Evans Schuppe (verified owner) –
Very nice a sturdy—used the stand and the Led light the same day I received them both —I like the there is no cords to plug in and no cords to trip over
Chyna Nicolas (verified owner) –
This light stand, with both rigid lights on it has been crucial to my remodel project since there are no lights hooked up yet. I can put the fan on it too. I’m very happy with it.
Raina Casper (verified owner) –
It was a gift, but the recipient was very pleased.
Juanita Hoeger (verified owner) –
Well made, very tight and steady compared to any of the halogen light towers I’ve had in the past.
Alisa Pouros (verified owner) –
Very sturdy stand and about as flexible as you could possibly want for placement of lights. The ability to adjust a leg is really nice on uneven ground. Highly recommend.
Lucile Kerluke (verified owner) –
Must have for lights. Probably can’t find it anymore though since it was clearanced. Sturdy and easy to adjust
Kaela Mayer (verified owner) –
More heavy duty then others
Bryana Wisoky (verified owner) –
Works great for Laser stand setting wall panels and millwork where typical tripod will only go to max 6′
Saul Simonis (verified owner) –
Good tripod, strong and ridgid with many functions.
America Cronin (verified owner) –
Overall a nice stand. I was disappointed that the legs are plastic. I thought it would be higher quality considering the price. I am concerned about what the durability will be. Built in level is a nice feature.
Hilario Kris (verified owner) –
Easy to use. It stands up, has all kinds of levels and takes up a fair amount of space. I like all the possibilities for optional equipment.
Morgan O’Keefe (verified owner) –
I got this with the light and extra battery. I have a lot of ridgid tool and there the best 5 out of 5. However cant say the same with this tripod. I feel like they didnt take the time makeing or designing it. I have a hard time opening it up and folding it up. Also when i fold it up one of the three arms (the smaller one) hits the carring handle. I have to move the arms to close it. Same thns happons when opening. The other problem is that while trying to open it the handle broke. It was only the third time I opened it. I was very dissapointed. Not worth returning little apoxie fixed it. Over all i’m not to satisfied with it. it just feels cheap. Maybe mine was just a bad one? However im brand loyal and this is the only tool out of all of my redgid tools thats not a solid 5 of 5.
Noelia Casper (verified owner) –
This tripod mount is very solid and well made. I was very surprised at the weight this thing had when I first opened the box. I feel like this will hold up to some jobsite abuse.
Aliyah Lindgren (verified owner) –
Seems to be made well and should last a long time for everyone that has one. I just found it to be somewhat bulky and a little bit pricey. After trying it out for a week, I decided it would just be an item that would never really get used. I am fine with letting the lights and fan I have just sit on the floor for now. For those that really need to have a stand instead of just wanting one, this stand should be just fine.
Alejandra Kohler (verified owner) –
Would give 5 stars but can be a little wobbly if only using 1 light so I bought a second and working much better