Rockwell Blade Runner X2 Portable Tabletop Saw
$135.00
Introduce a durable and essential addition to your vehicle with the selection of this extra ordinary Rockwell Blade Runner X Tabletop Saw.
In stock
Description
The Rockwell BladeRunner X2 Portable Tabletop Saw is the solution to the problem of having to take materials back to the workshop to cut them, and then bring them back to the job site later on. If you’re a contractor, you know that that process can add an entire day to a project. The BladeRunner is only 15 lbs, so while stable and sturdy, it’s easy to toss in the back of the truck. And with a footprint of only 15.75” x 17”, it doesn’t take up an entire workbench like traditional table saws. The hold-down guard and splitter allow for work with wider materials, and a larger rip fence than other portable table saws provides better control and accurate cuts. A no-load speed of 3000/min, a stroke length of ¾”, with 5.5 amps of power gives it the capacity for light to moderate cutting of wood (up to 1-1/2”), ceramic tile (3/8”), PVC pipe (1-1/4”), aluminum (3/8”), and steel (1/8”). (Anything over 1-1/2” and you’re probably going to need a traditional, permanently fixed tabletop saw—but you can’t take that to the job site.) The blades change out almost instantly, in under 3 seconds once you get the hang of the tool-less blade change system. And the saw is protected by a Rockwell 3-year limited warranty, so you know they stand behind their tools.
- [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
- [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
- [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
- [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
- [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
- [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut
- Safety switch with key prevents accidental start
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 14.00 lbs |
|---|---|
| Dimensions | 16.10 × 17.50 × 8.30 in |
| Amperage (amps) | 5.5 |
| Horsepower (hp) | 0 |
| Tools Product Type | Power Tool |
| Table Tilt Right Max (degrees) | 0 |
| Table Tilt Left Max (degrees) | 0 |
| Rip Capacity - Right | 6 |
| Rip Capacity - Left | 0 |
| Power Tool Features | Blade Guard System, No Tool Blade Change |
| PT Horsepower (Hp) | 2 |
| Model | RK7323 |
| Maximum Cut Depth @ 90 Deg. | 0 |
| Maximum Cut Depth @ 45 Deg. | 0 |
| Included Accessories | Blades, Miter Fence, Rip Fence |
| Depth Control | No |
| Bench & Stationary Tool Type | Table Saw |
| Cuts Through | Aluminum, PVC, Plastic, Porcelain, Wood |
| Cordless/ Corded | Corded |
| Corded Tool Type | Specialty Saw |
| Cord Length (ft.) | 4 |
| Construction Material | Acrylonitrile Butadiene Styrene (ABS) |
| Condition | New |
| Color Family | Gray |
| Blade Speed | 3000.000 |
| Blade Location | Centered |
| Blade Diameter (in.) | 4 |
| Blade Diameter | 4 |
| Work Table Surface | in. x in. |
Reviews (89)
89 reviews for Rockwell Blade Runner X2 Portable Tabletop Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Saws
Model# D28715
Saws
Model# 6480-20
Saws
Model# 6370-20
Saws
Model# DW331K
Julie Pfannerstill (verified owner) –
I gave it as a gift and have heard only good things about it.
Lucienne Marquardt (verified owner) –
When the job is too big for a hobby jig saw and too small for a full size table saw.The blade selection is good, but what should you use for 1/8 inch plastic?
Bulah Bernier (verified owner) –
Its perfect for smaller stuff like ripping a piece of moulding or cutting an angle to match a wall edge. A circular saw would be to dangerous for these small cuts so close to the blade.
Sonya Runolfsdottir (verified owner) –
I absolutely love it. I do crafts, work with wood alot, so I needed a saw that can do it all. I would recommend it to anyone. I have had it for maybe 2 weeks now, and I’ve used it servial times.
Isaac Shields (verified owner) –
What a wonderful saw is was able to trim boarder trim to fit my bathroom and able to cut 45 degree cut just like my miter saw very glad iI bought this able to set up in seconds easy to use and very light weight. Thank you for making this product.
Halle Ferry (verified owner) –
Better than I expected. Allows me to do precision cuts which I could not achieve with a hand saw
Brock Lesch (verified owner) –
A little small for some work, but fine for most
Alexandria Ferry (verified owner) –
The Rockwell Blade Runner is ideal for my purpose of cutting pewter sheet and other light gauge metals as well as 1/8-1/4 inch boards. The larger flat surface is convenient and the guides both work well. Lightweight saw so slower cutting. Quite loud and some adjustments were needed at outset.
Zander Cronin (verified owner) –
Noisier than a cheap leaf blower or power mower with a broken muffler.
Fabiola Ziemann (verified owner) –
It isn’t a replacement for a band saw, but if you make thin cut marks and pay attention, it get the work done.
Jamey Huel (verified owner) –
This device makes sawing almost anything easy. I needed it to cut travertine flooring tiles and various pieces of wood. Included different saws for ceramic, wood, metal, plastic. Easy to set up and store. Don’t know how I did without this for so long.
Hillard Kutch (verified owner) –
the product serves its purpose and performs the way it should be.
Eda Borer (verified owner) –
This has been a wonderful tool for me. I’m building a 1/4 scale WWI aircraft and have used this extensively. Followed another’s advice and used a square to set the rip fence square to the blade and added an extension on the miter and used a square to ensure cuts were accurate. Now a great tool
Kenyon Nicolas (verified owner) –
Awesome little saw does the job
Jeanie Bartell (verified owner) –
It is ez to use
Lexus Lindgren (verified owner) –
This saw is a dream! Super easy to use, blade changes are quick and super easy!The cuts are smooth and accurate. LOVE the lightweight and portability of this saw!HIGHLY RECOMMENDED for any craftsperson or DIYer!
Isaias Shanahan (verified owner) –
Economical alternative to a more durable ta le saw. This was used for light flooring material and performed adequately.
Justine Stamm (verified owner) –
Once we figured out how the blade was inserted and ejected, we were very please with the smoothness of the wood cutting experience.
Adela Gusikowski (verified owner) –
It was very easy to set up the downside to it is you have to cut very slowly when ripping or it tends to wobble off the straight line
Faye Upton (verified owner) –
The BladeRunner X2 Portable Tabletop Saw is a true workhorse! I need something strong, portable and lasting & this has been a blessing. I bought a fixer-upper, so, I’ve used this to redo my condo and now my son is using it to work on his house. It has the power to do any job I ask of it & then some, plus it’s easy to use and quick set-up. Highly recommend