Rockwell Blade Runner X2 Portable Tabletop Saw
$135.00
Introduce a durable and essential addition to your vehicle with the selection of this extra ordinary Rockwell Blade Runner X Tabletop Saw.
In stock
Description
The Rockwell BladeRunner X2 Portable Tabletop Saw is the solution to the problem of having to take materials back to the workshop to cut them, and then bring them back to the job site later on. If you’re a contractor, you know that that process can add an entire day to a project. The BladeRunner is only 15 lbs, so while stable and sturdy, it’s easy to toss in the back of the truck. And with a footprint of only 15.75” x 17”, it doesn’t take up an entire workbench like traditional table saws. The hold-down guard and splitter allow for work with wider materials, and a larger rip fence than other portable table saws provides better control and accurate cuts. A no-load speed of 3000/min, a stroke length of ¾”, with 5.5 amps of power gives it the capacity for light to moderate cutting of wood (up to 1-1/2”), ceramic tile (3/8”), PVC pipe (1-1/4”), aluminum (3/8”), and steel (1/8”). (Anything over 1-1/2” and you’re probably going to need a traditional, permanently fixed tabletop saw—but you can’t take that to the job site.) The blades change out almost instantly, in under 3 seconds once you get the hang of the tool-less blade change system. And the saw is protected by a Rockwell 3-year limited warranty, so you know they stand behind their tools.
- [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
- [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
- [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
- [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
- [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
- [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut
- Safety switch with key prevents accidental start
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 14.00 lbs |
|---|---|
| Dimensions | 16.10 × 17.50 × 8.30 in |
| Amperage (amps) | 5.5 |
| Horsepower (hp) | 0 |
| Tools Product Type | Power Tool |
| Table Tilt Right Max (degrees) | 0 |
| Table Tilt Left Max (degrees) | 0 |
| Rip Capacity - Right | 6 |
| Rip Capacity - Left | 0 |
| Power Tool Features | Blade Guard System, No Tool Blade Change |
| PT Horsepower (Hp) | 2 |
| Model | RK7323 |
| Maximum Cut Depth @ 90 Deg. | 0 |
| Maximum Cut Depth @ 45 Deg. | 0 |
| Included Accessories | Blades, Miter Fence, Rip Fence |
| Depth Control | No |
| Bench & Stationary Tool Type | Table Saw |
| Cuts Through | Aluminum, PVC, Plastic, Porcelain, Wood |
| Cordless/ Corded | Corded |
| Corded Tool Type | Specialty Saw |
| Cord Length (ft.) | 4 |
| Construction Material | Acrylonitrile Butadiene Styrene (ABS) |
| Condition | New |
| Color Family | Gray |
| Blade Speed | 3000.000 |
| Blade Location | Centered |
| Blade Diameter (in.) | 4 |
| Blade Diameter | 4 |
| Work Table Surface | in. x in. |
Reviews (89)
89 reviews for Rockwell Blade Runner X2 Portable Tabletop Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Saws
Model# DW716
Saws
Model# 1590EVSK
Saws
RIDGID Thru Cool 6 Amp 1-Handed Orbital Reciprocating Saw Kit
Model# R3031
Saws
Milwaukee 15 Amp 7-1/4 in. Tilt-Lok Circular Saw with Hard Case
Model# 6390-21
Mollie Heidenreich (verified owner) –
I received my Rockwell bladerunner as a Fathers Day gift from my parents….my wife makes doorhangers out of 1/4 inch plywood and I have probably cut several hundred designs out for her…. up until today when all of a sudden it acted as if the saw lost power and started to make a chugging sound from the motor area….I had only cut 4 small designs when all of this occurred and couldnt even finish the task at hand… I would recommend this for small jobs around the house (occasional use) but not for extended use like I have used it for … thanks rockwell but maybe I need to look into a different product that will not fail in the middle of a project
Raphaelle Schinner (verified owner) –
Good saw for quick smaller projects
Breana Halvorson (verified owner) –
Did exacting what i thought it would do. And, it did it very well.
Fidel Durgan (verified owner) –
Great little table saw for the money.
Nia Walsh (verified owner) –
I like the portability of this saw. I used it once and it struggled with the thickness of the wood which was only 3/4 in. I think the saw will be perfect for thinner wood and I purchased it mainly for use while installing a laminate floor and because it could easily be used in our rental house.
Marcelo Stracke (verified owner) –
great; but need better blades
Amber Walter (verified owner) –
I got this to help me build my bird house’s and I can say this saw does it all,one of the best saws I have…thanks Rockwell you’ve come through again!!!!
Skyla Hessel (verified owner) –
very difficult to keep a straight cut. Jig saw blade has some lateral movement so cuts are not true
Kade Lakin (verified owner) –
Can do all types of cutting. But the machine is vibrating and hard to fix while cutting.
Marques Bogan (verified owner) –
A little small for some work, but fine for most
Jace Monahan (verified owner) –
Bought for crafting projects…a bit loud however, it is user friendly…
Robert Cole (verified owner) –
Excellent for small home projects. I am disabled and this saw is light enough for me to move and use.
Henriette Hayes (verified owner) –
The description was spot on and everything works great!. Easy to use.
Paula Harvey (verified owner) –
I bought this saw to make a custom frame to attach a matte to that will fit inside a shadow box. I needed wood strip that were 3/4″ wide, but the smallest wide I could find were 1″ thick. I purchased this saw to rip through the five-layer laminated basswood strips so they would be 3/4″ wide and to cut those strip to the right lengths. The saw didn’t rip through the wood with the speed of a table saw, more at the speed of a jig saw, which it basically is. The saw handled the job beautifully, giving me straight cuts. Great craft saw for making picture frames and shadow boxes. The only thing that would make this saw even more versatile would be the capability to angle the blade to get beveled cuts so I could make roofs for birdhouses.
Jayme Kautzer (verified owner) –
Great tool !!!!
Zoey Herzog (verified owner) –
This is one tough little saw! of course, this shouldn’t be the only one saw for all your needs, if you’re up to big projects, but one you shouldn’t be without; it’s so easy to use and gets the job done; add a miter saw for cutting thicker woods such as 2x4s and you’re all set.Highly recommended.
Santino Lubowitz (verified owner) –
Excellent product
Lawrence DuBuque (verified owner) –
It cuts stuff
Federico Connelly (verified owner) –
I read the reviews before purchasing and was skeptical, but for the price I was willing to take a chance. I am impressed, now take into consideration I’m a hobbyist on a small scale. I make wooden and plastic toys for kids and this meets my needs. I’m not going to frame a house with it or even use it to install base moulding but it does allow me to precut larger material for use in my cnc router. it has plenty of power, light weight, does not take up much space and requires no tools to use. I do recommend taking the time to adjust the blade roller bearing guides and the parallel alignment of blade to table. I checked the fence measurement scale with the side profile of blade and it is right-on. If you can get this table saw for a good price, buy it.
Zoey Hyatt (verified owner) –
Easy assembly and the different cuts you can make is awesome