Rockwell BladeRunner Cross Cut Sled
$26.30
Make manual cleaning easier and decrease health concerns in your jobsite by choosing Rockwell BladeRunner Cross Cut Sled.
In stock
Description
For even more accuracy and precision, the bladerunner X2 crosscut sled attachment from Rockwell is the bladerunner accessory you need. its easily attached to the Rockwell bladerunner model to ensure your materials are fully supported as you cut. when you need to achieve that exact 90° cut, the Rockwell bladerunner x2 attachment keeps your material completely secure.
- Ideal for precise cross cutting applications
- Cutting groove for easy alignment
- Room to place your hands safely during your cuts
- Helps produce 90° cross cuts
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | .44 lbs |
|---|---|
| Dimensions | 18.50 × 18.50 × 2.75 in |
| Color Family | Black |
| Ideally Used With | Table Saws |
| Material | Plastic |
| Model | RW9266 |
| Power Tool Accessory Type | Other Accessory |
| Product Length (in.) | 18.5 in |
Reviews (95)
95 reviews for Rockwell BladeRunner Cross Cut Sled
Only logged in customers who have purchased this product may leave a review.
Related products
Saw Accessories
Model# DWS5100
Saw Accessories
Model# KMS7200
Saw Accessories
Model# KMS7800
Saw Accessories
Model# 82-31222
Saw Accessories
Triton 10 in. 15 Amp Contractor Saw Module for Use with WorkCentre
Model# TWX7CS001
Saw Accessories
Model# 365595
Saw Accessories
Model# WDHK01
Saw Accessories
Model# 36-260
Josue Douglas (verified owner) –
What a great additive to the BladeRunner. Helps you keep your cuts square. For repeat cuts you can clamp on stop.
Isadore Jones (verified owner) –
Makes it easier for both cutting boards straight and guiding them.
Caroline Wilkinson (verified owner) –
Thought I didn’t need it but it’s much better to have it
Easton Tillman (verified owner) –
This sled is a must have accessory for your bladerunner! It keeps the material nice and square as you cut. I would give it 5 stars; however, when cutting 3/4 inch material the foot rides to high to stop the sled and I ended up cutting into the sled itself. The back portion should be a little higher.
Ozella Deckow (verified owner) –
Does not allow me to use the miter gauge or the side rail so it is for straight cuts only.
Ahmad Parisian (verified owner) –
I bought it for Christmas and i have not used it yet but i put it on my saw.
Taylor Mayer (verified owner) –
Works very well. Easy to use resulting in more uniform cuts.
Georgette Hartmann (verified owner) –
Love it and simple to use. Plus its so light weight
Lizeth Wiegand (verified owner) –
Bought this with the blade runner x2. Works great!
Raquel Schimmel (verified owner) –
I really like my blade runner X2. I debated for months on whether or not I really needed this. After using it several times I don’t know why I didn’t buy it sooner. I would recommend this to anyone who has a blade runner and needs to make better, straighter cuts.
Magnus Effertz (verified owner) –
Item is well made, and if you want the ability to make precise cuts this is the ticket!! Helps alot in holding material steady and firm, And i think it was well priced… I would recommend if you need to make straight precise cuts..
Audrey Carroll (verified owner) –
I really like the Crosscut Sled. After reading through many reviews on different sites, I wasn’t sure if I wanted to purchase the sled. Since I trust and know that Rockwell makes great tools, I decided to purchase it and I sure am glad I did. It works perfectly. I was using it to cut trim for my kitchen and my cuts were perfectly straight. I even let my wife cut some of the trim and it was the first time she ever made a straight cross cut. I couldn’t be happier with the Crosscut Sled. Some of the reviews stated that it doesn’t fit right on the BladeRunner X2, but, mine fits perfectly and there’s no play in the sled while doing the crosscut. If you want perfectly straight Cross Cuts, I would definitely recommend the CrossCut Sled attachment for the BladeRunner X2. It’s well worth the money.
Elisabeth Mueller (verified owner) –
I got this to help in feeding material thru the saw. It works well and the back edge helps material from moving during crooscuts. Easy to install and remove.
Ima Botsford (verified owner) –
Nice addition to my Bladerunner 2
Immanuel Lubowitz (verified owner) –
This crosscut sled is a great addition. I find it stabilizes the material being cut, making more accurate cuts. Also, I feel it adds a factor of safety, especially when trimming smaller pieces.