Rubi 1/4 in. Wet Cut Drill Bit
$9.37
Diamond drill bits to be used with electric drill without hammer. The quality of the diamond allows the drilling of ceramics, porcelain, granite, marble and glass.
In stock
Description
Diamond drill bits to be used with electric drill without hammer. The quality of the diamond allows the drilling of ceramics, porcelain, granite, marble and glass.
- Ideal to install bathroom accessories and any type of decorative accessories over ceramic surfaces
- They must always be used with the EASY GRES guide which allows their adequate refrigeration ensuring a high accuracy and good results
- Average life between 5 and 10 holes depending on the material
- Body made of steel and bit made of electrodeposited diamond
- Lateral opening to improve cooling of the drill bit and to allow the elimination of solid waste produced after the drilling of the hole
- Recommended speed of use between 400 and 1000 r.p.m. depending of the material to be drilled
- To achieve a better finish and a longer life of the drill bit, it’s important to observe the adequate speed of use and to apply a moderate pressure during the drilling
- Easy Gres drill bit 1/4 in. (6.5 mm)
- Supplied in blister
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 2.00 × 2.00 × 5.00 in |
| Assembled Depth (in.) | 2 in |
| Assembled Height (in.) | 3 in |
| Assembled Width (in.) | 0.25 in |
| Bit Length (in.) | 0.2 |
| Bit Material | Diamond |
| Drill Bit Type | Specialty |
| Drill Bit Type(s) Included | Specialty |
| Individual/Set | Individual |
| Material Application | Ceramic Tile, Glass, Porcelain |
| Model | 4920 |
| Self-Feeding | Yes |
| Shank Diameter | 1/4 in |
| Shank Style | Straight |
Reviews (21)
21 reviews for Rubi 1/4 in. Wet Cut Drill Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# DW2043 Z
Drill Bits
Model# FB-015
Drill Bits
Model# 48-28-1010
Drill Bits
Model# DW2735P
Drill Bits
Milwaukee 18 in. x 7/16 in. Bit Extension Bit Extention For Selfeed Bits and Hole Saws
Model# 48-28-4011
Drill Bits
Model# FB-003
Drill Bits
Bosch Carbide-Tipped Rotary SDS-Plus Hammer Bit Set (7-Piece)
Model# HCK001
Drill Bits
Bosch 20 in. Hammer Steel 1-1/8 in. Hex Moil Point Chisel for General Chipping Work
Model# HS2161
Cooper Medhurst (verified owner) –
Worked great glad I ordered a second one I bent the first one pretty bad.
Oscar Ward (verified owner) –
Drills through glass no problem. Just a little water and your set.
Rahul Emard (verified owner) –
I looked for this tool and finally found online, I just did my project in my bathroom without damaging the ceramic tile. I am really happy to received it in few days and great price.
Spencer Medhurst (verified owner) –
These bits works great on ceramic dinnerware
Delphia Kuvalis (verified owner) –
I only needed this for 2 holes in ceramic tile. Good thing cause that’s about all it is good for, but that is why I only bought a cheap drill. Even using water most of the abrasive was gone after 2 holes but if that’s all you need its worth it. Got what I needed and paid for. 🙂
Eldora Powlowski (verified owner) –
Bought the set with the drill guide. May look like a toy, but works great. Tape attaches drill guide to tile and is easily centered on markings. Water keeps the drill cool. Take your time with slow speed and low pressure and nothing will crack.Would buy again.
Alexandria Adams (verified owner) –
we use these mostly in bathrooms to drill threw porcelain tiles so the fixture guys can mount their stuff. these give a clean cut threw very hard tempered tiles . price is low enough to keep 3-4 on hand .
Alayna Mann (verified owner) –
10 holes through porcelain tile and still going strong.
Ted Welch (verified owner) –
you’ll need a guide and keep the bit wet!
Jack Welch (verified owner) –
Works as advertised. Made drilling through porcelain tile much easier than using a carbide bit and having it dull quickly. Don’t forget to use water on the diamond bit to keep it cool, and don’t run your drill at max speed to prolong the tool life.
Garland Mante (verified owner) –
I used this to drill twice through 1 1/4 in. granite. I did not use it in a water jig. It worked, and the bit is fine. Granted, it takes time and you have to go slow.You have to wet the drill bit, start the hole, drill a bit, stop, wet the drill bit, go back to drilling, repeat, repeat, repeat, etc.Considering what I paid for the bit, this is one of the best purchases I’ve ever made at this store.
Tiffany Bartell (verified owner) –
was as described
Cletus Reichert (verified owner) –
Best tile drill bit hands down. Economical and very effective. Drilled 8 holes through 3/8″ tiles and still have plenty of bite left. Stumbled across this gem after gotten frustrated by all the other tile, glass, and masonry bits, which don’t work well and each barely last through 2-3 holes.
Derrick Douglas (verified owner) –
Follow the online video. Easy to start the hole and drill right thru the tile. Keep bit clean and wet with a spray bottle of water. Drills through tile in a matter of minutes. Amazing.
Taya O’Connell (verified owner) –
OK for a cheap bit. Not too good for deep holes in concrete. Probably OK for tile.
Marquise Koelpin (verified owner) –
Good quality just use water to better drilling specially in porcelain
Vilma Denesik (verified owner) –
I love these dill bits. I am 77 year young lady and I use for my craft projects. They do a good job but most of all …..GREAT PRICE.
Nora Schuster (verified owner) –
Ordered for my Mom. She hasn’t used it yet, is trying to figure it out. We’ll be trying to drill some ceramic bowls soon.
Lysanne Ortiz (verified owner) –
Excellent value; cut through porcelain tiles with ease.
Royce Funk (verified owner) –
Worked great glad I ordered a second one I bent the first one pretty bad.