Rubi 1-1/8 in. Drill Bit
$18.99
Electroplated diamond drills for use with electric drills without hammer. The quality of the diamond permits drilling stoneware, porcelain, granite, marble and glass. Always use water-cooled.
In stock
Description
Electroplated diamond drills for use with electric drills without hammer. The quality of the diamond permits drilling stoneware, porcelain, granite, marble and glass. Always use water-cooled.
- Working speed varies between 400 and 1000 r.p.m, depending on the material to be drilled
- Average life of 10 holes, depending on the material
- Lateral opening for improved cooling and allow the removal of solid waste after each hole
- For a better finishing and longer bit life, is important to respect the right speed and moderate pressure during drilling
- Easy Gres drill bit 1-1/8 in. (28 mm)
- Supplied in blister
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 2.00 × 2.00 × 5.00 in |
| Assembled Depth (in.) | 1.5 in |
| Assembled Height (in.) | 2.2 in |
| Assembled Width (in.) | 1.125 in |
| Bit Length (in.) | 0.2 |
| Bit Material | Diamond |
| Drill Bit Type | Specialty |
| Drill Bit Type(s) Included | Specialty |
| Individual/Set | Individual |
| Material Application | Ceramic Tile, Glass, Porcelain |
| Model | 5962 |
| Self-Feeding | Yes |
| Shank Diameter | 5/16 in |
| Shank Style | Straight |
Reviews (6)
6 reviews for Rubi 1-1/8 in. Drill Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Bosch 20 in. x 3 in. Hammer Steel 1-1/8 in. Hex Chisel for Demolition Hammer
Model# HS2164
Drill Bits
Model# DW2045 G
Drill Bits
Model# FB-003
Drill Bits
Model# 49-56-7010
Drill Bits
Model# DW2043 Z
Drill Bits
Model# FB-005
Drill Bits
Model# 48-20-8856
Drill Bits
Model# DW2542
Lucienne Cormier (verified owner) –
I bought the bit to drill a hole in a granite counter top. The bit did the job very well.
Aron Stark (verified owner) –
Took a while but made a satisfactory hole through 1/4″ glass.
Camren Maggio (verified owner) –
Did not end up using it. I found another that had a center drill which prevented the hole drill from riding.
Eliza Cassin (verified owner) –
Great bit for drilling ceramic tile. Start slow to allow bit to bite then increase drill speed. I used some plumbers putty to hold in the water while cutting
Maeve Altenwerth (verified owner) –
Great product, easy to use, clean cuts all the time.
Eva Goyette (verified owner) –
The issue of non-purchase, was I already had a drill bit this size. Thanks anyway.