Rubi 2 in. Drill Bit
$20.59
Electroplated diamond drills for use with electric drills. The quality of the diamond permits drilling stoneware, porcelain, granite, marble and glass. Always use water-cooled.
In stock
Description
Electroplated diamond drills for use with electric drills. The quality of the diamond permits drilling stoneware, porcelain, granite, marble and glass. Always use water-cooled.
- Working speed varies between 400 and 1000 r.p.m, depending on the material to be drilled
- Average life of 10 holes, depending on the material
- Body in steel and electroplated diamond tips
- Lateral opening for improved cooling and allow the removal of solid waste after each hole
- For a better finishing and longer bit life, is important to respect the right speed and moderate pressure during drilling
- Easy gres drill bit 2 in (50 mm)
- Supplied in blister
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 2.00 × 2.00 × 5.00 in |
| Assembled Depth (in.) | 2 in |
| Assembled Height (in.) | 2.5 in |
| Assembled Width (in.) | 2 in |
| Bit Length (in.) | 2 |
| Bit Material | Diamond |
| Drill Bit Type | Specialty |
| Drill Bit Type(s) Included | Specialty |
| Individual/Set | Individual |
| Material Application | Ceramic Tile, Glass, Porcelain |
| Model | 5966 |
| Self-Feeding | Yes |
| Shank Diameter | 5/16 in |
| Shank Style | Straight |
Reviews (2)
2 reviews for Rubi 2 in. Drill Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# DW2542
Drill Bits
Model# DW2045 G
Drill Bits
Milwaukee 18 in. x 7/16 in. QUIK-LOK Universal Extension Bit
Model# 48-28-1050
Drill Bits
Model# DW2535
Drill Bits
Model# 48-25-2252
Drill Bits
Model# DW2162
Drill Bits
Bosch 20 in. Hammer Steel 1-1/8 in. Hex Moil Point Chisel for General Chipping Work
Model# HS2161
Drill Bits
Model# DW2043 Z
Vivien Gibson (verified owner) –
I used this to drill a hole for a patio cover in a stone patio table. I don’t know the exact material but it was pretty hard stone. I set up a jig to hold the drill in the correct location and while running a low volume stream of water on the bit while drilling, it went right through without a problem. It probably took 5-10 minutes to get through about a 1″ piece of material with frequent washing out of grit.Did the job I bought it for. Sort of expensive to use on only job but paying someone else to do it would probably cost more.
Lulu Hamill (verified owner) –
Used this to cut a hole through a piece of 3/8″ slate. Worked perfectly while pouring water over the slate to keep things from overheating. Not sure how many holes it will cut before it wears out but worked great the one time I used it.