RYOBI Door Latch Installation Kit
$11.52
Update your home with this RYOBI Door Latch Installation Kit
In stock
Description
RYOBI introduces the Door Latch Installation Kit. The RYOBI Door Latch Installation Kit is a simple solution for installing door latches. This tool scores and chisels round or square latches. It also includes an integrated screwdriver to install latch plates.
- 90 fence for straighter chisel marks
- Scores and chisels all latches
- Chisel depth accuracy
- No measurements required
- Includes: Built-in screwdriver
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 0.64 lbs |
|---|---|
| Dimensions | 4.88 × 1.77 × 9.94 in |
| Assembled Depth (in.) | 4.35 in |
| Assembled Height (in.) | 7.39 in |
| Assembled Width (in.) | 1.17 in |
| Bit Length (in.) | 4.35 |
| Bit Material | Other |
| Drill Bit Type | Specialty |
| Drill Bit Type(s) Included | Specialty |
| Individual/Set | Individual |
| Material Application | Wood |
| Model | A99LM2 |
| Self-Feeding | No |
| Shank Diameter | 1/4 in |
| Shank Style | Hex |
| Tools Product Type | Power Tool |
Reviews (72)
72 reviews for RYOBI Door Latch Installation Kit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# DW2535
Drill Bits
Milwaukee 18 in. x 7/16 in. Bit Extension Bit Extention For Selfeed Bits and Hole Saws
Model# 48-28-4011
Drill Bits
Model# DW2045 G
Drill Bits
Model# DW2046 G
Drill Bits
Model# FB-007
Drill Bits
Model# DW2043 Z
Drill Bits
Model# DW2162
Drill Bits
Bosch 20 in. Hammer Steel 1-1/8 in. Hex Moil Point Chisel for General Chipping Work
Model# HS2161
Marcelino Dickinson (verified owner) –
Worked great, Just like advertised
Letha McCullough (verified owner) –
Easy to use and accurate!
Sean Crooks (verified owner) –
I used it for a door project. It matched the door hardware perfectly. I did not use the top chisel tool. I used my own chisels and did a little with a Dremel tool.
Tess Tromp (verified owner) –
Must have tool for door latch installation
Santina Weissnat (verified owner) –
Got the job done but wasn’t the cleanest finished product.
Eulah Wehner (verified owner) –
Excellent tool, saved my doors!
Elmo Von (verified owner) –
If you are unsure how to install a deadbolt. You need to use the Ryobi tools to do the job right. I watched a video on YouTube and decided to purchase the Ryobi tools and how simple it was for a simple homeowner to do a wonderful job and it looks professionally installed
Luisa Ondricka (verified owner) –
Easy to follow instructions. Did what it was intended to do.
Luisa Nitzsche (verified owner) –
This made my door hanging project easy.
Keegan Spinka (verified owner) –
Easy to use worth it.
Eliezer McCullough (verified owner) –
Worked great except for the chisel part. Ended up having to use my own chisel
Haven Ullrich (verified owner) –
Great tool, Easy to use, completely eliminated the guess work and uncertainty usually involved in lining up deadbolts to the door jab
Verner O’Conner (verified owner) –
Started out good, almost ended bad. The chisel on the top bent and cut too deep. Barely salvaged the door and I won’t be able to use it again. I have several RYOBI tools so I am disappointed this didn’t work out the way I hoped.
Rhianna Breitenberg (verified owner) –
should have had one these for years . rental door repairs made simple
Jairo Donnelly (verified owner) –
Worked perfect as described
Lucile Becker (verified owner) –
Ended up returning it. Hubby could not use rotor.
Granville Brown (verified owner) –
It’s a handy little tool that helps out keep from splitting the edges open
Evelyn Runte (verified owner) –
Product worked as designed.
Cynthia Shields (verified owner) –
It works semi-okay, but I still needed to do a lot more chisel work than the You Tube Videos led me to expect. The edges of the latch cutout ended up being more crushed than cleanly cut which made the recess look oversize for the installed latch and resulting in a sort of ragged and sloppy installed look. I also found that keeping the jig aligned vertically was harder than I expected as I just couldn’t see if I was holding it tight and straight while striking it, so my first strike ended up tilted somewhat and I had to forcefully counter twist the handle while finishing the rest of the job. My one door took 2 to 3 times longer than I expected and the results, although easier and better than straight hand chiseling, were not very clean looking. I ended up redoing the latch by using a router jig (also a Ryobi jig) to make it look better. With practice, some DIYers could likely get fine results, but I just don’t see the point if you have a lightweight or trim router and an inexpensive jig that costs about the same as this item.Bottom line is that if you only need to do one or two doors, it is cheap, and probably works well enough to meet most DIYer needs. On the other hand if you have a trim router and are going to change out more than a couple of latch sets, you will probably be better served by buying the Ryobi router version which is also cheap but is very fast, very easy to use and leaves a professional looking recess for the latch. That is what I did after using this non-router version on just one door latch.
Lyla Dickens (verified owner) –
Thought I would give it a try as I install several doors and locks a year. However if you’re going to do more than one or two doors this product isn’t for you. the plastic needs to be of stronger material as does the meatal for striking into the door. One use and it will be dull. Looked promising and price was enticing but not well built. I was to say disappointed with the product. I own many Ryobi products and this is the first time I had to say not good.