RYOBI SpeedLoad+ 5-Piece Power Groove Countersink Set
$12.57
Accomplish all your difficult drilling tasks effortlessly with the choice of this amazing RYOBI SpeedLoad Power Groove Countersink Set
In stock
Description
RYOBI introduces the SpeedLoad+ 5-Piece Power Groove Countersink Set. This set gives you what you need to set screws flush with or below the surface of a material. Use this set with the RYOBI 1/4 in. Hex Shank Speedload+ Chuck. The Power Groove Countersink Set (5-Piece) includes four countersinks and a hex wrench for changing or tightening the drill bit in each countersink.
- Use with the RYOBI 1/4 in. Hex Shank Speedload+ Chuck (sold separately) or any 1/4 in. hex shank
- High carbon steel for drilling in wood
- 3 sharp edges for clean holes
- Titanium-coated drill bit in the countersink for durability
- Includes: (1) #6, (1) #8, (1) #10, and (1) #12 screw sizes and a hex wrench.
- Comes with a hex wrench
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 0.18 lbs |
|---|---|
| Dimensions | 2.87 × 0.79 × 5.75 in |
| Bit Material | Titanium |
| Drill Bit Type | Countersink |
| Drill Bit Type(s) Included | Countersink |
| Individual/Set | Set |
| Model | AR2008G |
| Number of Pieces | 5 |
| Self-Feeding | No |
| Shank Style | Hex |
| Tools Product Type | Power Tool |
Reviews (60)
60 reviews for RYOBI SpeedLoad+ 5-Piece Power Groove Countersink Set
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Bosch 20 in. Hammer Steel 1-1/8 in. Hex Moil Point Chisel for General Chipping Work
Model# HS2161
Drill Bits
Bosch Carbide-Tipped Rotary SDS-Plus Hammer Bit Set (7-Piece)
Model# HCK001
Drill Bits
Model# 282269
Drill Bits
Model# 48-28-1010
Drill Bits
Bosch 20 in. x 3 in. Hammer Steel 1-1/8 in. Hex Chisel for Demolition Hammer
Model# HS2164
Drill Bits
Milwaukee 18 in. x 7/16 in. QUIK-LOK Universal Extension Bit
Model# 48-28-1050
Drill Bits
Model# DW2735P
Drill Bits
Model# 48-20-8856
Raul Kohler (verified owner) –
Doesn’t look very strong.
Emiliano McGlynn (verified owner) –
These are the best countersinks I have ever used! They actually are sized correctly,unlike the ones I had used before with the wooden case they came in.
Freddy Yost (verified owner) –
I’ve only used the bit for a #10 hole so far, but it worked as expected.
Kenya Eichmann (verified owner) –
Does the job.
Herbert Stark (verified owner) –
They work as intended, no issues.
Esmeralda McGlynn (verified owner) –
Very good for price.
Diana Koelpin (verified owner) –
They worked great—-I needed to countersink two different sized screws—theses did the job
Cristobal Lang (verified owner) –
Drills are actually sharp and the countersink also cut fairly well. I have some older ones that just rub the wood away. I bought these because of a project that was going to need quite a few countersinks.the packaging is not much use and so hard to keep track of the allen key.On second use of the #10 I broke the drill pulling it out of the hole. It was a bit tight because of softness of the wood and pulling from the drill handle did put some side load on the bit so can’t say if it was totally my fault or drill bit issue.Better packaging would have given it 5 stars.
Caterina Koepp (verified owner) –
Exactly what I needed. Stayed sharp for over 100 uses into oak.
Millie Wiza (verified owner) –
They countersink good…lets hope they keep an edge for a while.
Rosalyn Hand (verified owner) –
YES IT DID, IT WORKED PERFECTLY AND YOU CAN NOT BEAT THE PRICE.
Ned Kemmer (verified owner) –
These did the work for me! So far haven’t had any issues with them!
Aisha Carter (verified owner) –
if they were made from wood they might be better. Why Ryobi why? The counter sinks have no edge.
Octavia Bradtke (verified owner) –
I love it. Received very fast.
Sofia Lang (verified owner) –
These do exactly what I needed them to do. Makes a nice place for screw head to sit flush with the wood. Great product
Brandyn Mitchell (verified owner) –
RYOBI tools are never my first choice. And I don’t expect these to be anything special. They’ll wear out before I think they should or they’ll break. But other counter sink brands do as well. I fully expect these to be average.
Zula Reinger (verified owner) –
Nice set of countersink bits. Seem to worl very well.
Tremaine Welch (verified owner) –
Its sturdy and convenient to use
Elliott Reichel (verified owner) –
This is a must have tool for home projects!
Amara Jacobi (verified owner) –
Countersink worked well, easy to adjust as needed. Comes with wrench for adjustment.