RYOBI One-Way Screw Remover/Installer Set with Sleeve (3-Piece)
$14.67
Accomplish all your difficult drilling tasks effortlessly with the choice of this amazing RYOBI OneWay Screw Remover Installer Set with Sleeve
In stock
Description
RYOBI introduces the One-Way Screw Remover/Installer Set with Sleeve (3-Piece). This set is ideal for driving and removing one-way screws. The set includes 3 tools of different sizes to accommodate screws ranging in size from #4 to #14 and larger.
- Drives and removes most one-way screws
- Useful for installing tamper-proof fasteners
- The included sleeve guide is for use with larger screws
- Includes: (1) Piece for #4 – #8 size screws, (1) Piece for #10 – #12 size screws, (1) Piece for #14 and larger size screws, and (1) Sleeve Guide for larger screws
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 0.13 lbs |
|---|---|
| Dimensions | 2.87 × 1.34 × 5.00 in |
| Bit Material | High Speed Steel |
| Drill Bit Type | Specialty |
| Drill Bit Type(s) Included | Screwdriver |
| Individual/Set | Set |
| Model | AR2016G |
| Number of Pieces | 3 |
| Self-Feeding | No |
| Shank Style | Hex |
| Tools Product Type | Power Tool |
Reviews (44)
44 reviews for RYOBI One-Way Screw Remover/Installer Set with Sleeve (3-Piece)
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# 48-28-1010
Drill Bits
Model# 48-32-2100
Drill Bits
Model# 48-20-8852
Drill Bits
Model# DW2735P
Drill Bits
Model# DW2535
Drill Bits
Milwaukee 1/4 in. X 3-1/2 in. Pilot Drill Bit For Hole Saw Arbor
Model# 49-56-8010
Drill Bits
Model# DW2542
Drill Bits
Milwaukee 18 in. x 7/16 in. Bit Extension Bit Extention For Selfeed Bits and Hole Saws
Model# 48-28-4011
Emmitt Koepp (verified owner) –
Works great for installing one way lags and screws various sizes. Use them on a professional level easiest bit for installation of one way lags and screws.
Aida Turcotte (verified owner) –
They worked well, got the bolts off and the new ones on.
Ana Hansen (verified owner) –
The tool worked as intended. One way. A must for security screws.
Faustino Beer (verified owner) –
Did exactly what I wanted it to do
Wilfred Bailey (verified owner) –
A good variety of bit sizes, but I could have used a larger one to install screws for a window security grill. Make sure your drill has plenty of torque to drive in the screw. You cannot back it out and try again.
Sylvan Wolff (verified owner) –
great tool
Phyllis Reichel (verified owner) –
Great for what it was bought for. Wish store would stock more in each store. Very hard to find.
Alan Harris (verified owner) –
Not so good but got the job done
Alena Wilderman (verified owner) –
Worked pretty well had a little trouble backing up 2 screws
Harmony Batz (verified owner) –
I used this bit to successfully install 12 three inch screws when installing security grills on my house. Now i need to remove the grills paint them.I found success removing the one way screws with this Ryobi driver….the key to this however was to use a hammer drill on slowest setting while applying as much pressure as possibleagainst the screw. The counter clockwise hammer will set the reverse hooks of the driver into the screw head & back the screw out of the wall…….using maximum pressure against the screw head &slowest reverse speedsetting in hammer setting is of key importance! I give this tool 4 star rating because of the lack of detailed instruction on packaging & the need for creative thinking& a secialized tool to find success.
Ronaldo Hegmann (verified owner) –
Worked well, even on rusted and worn screws.
Demarcus Jones (verified owner) –
It will install one way screws. Alittel hard to remove them , have to make cut in screws to remove.
Rosanna McLaughlin (verified owner) –
This did the job once I’d prepped the non-removable screws. First I bought AvantiPro metal cut off disks, 3″diameter, 1/16″ thickness. Attached one to the drill and created a deep cross cut in the screw heads so they looked like phillips head screws. This eliminated the gradation which otherwise thwarted removal. Then a shot of WD-40 and a few whacks with a hammer. In one case it took the additional step of hammering a putty knife between the security door and the screw head. Then it was ready for this Ryobi tool. Applying some serious pressure and going easy on the electric drill’s throttle spun all three screws right out.
Tanner Gutkowski (verified owner) –
works good need lots of pressure to remove stubborn screws
Lorenzo Beer (verified owner) –
It will install one way screws. Alittel hard to remove them , have to make cut in screws to remove.
Kianna Wyman (verified owner) –
The tool is adequate. The finish on the sleeve discolored quickly with use.
Janiya Hodkiewicz (verified owner) –
I worked great! Used it to remove and re-install a bunch of screws and it worked better than expected. Still trying to figure out what the cone thing is for. I didn’t use it so I could see to center the bit in the slot on the one-way-screw and it worked great. Just remember to apply pressure so it will grab the screw.
Johathan Raynor (verified owner) –
Very easy to use, will be useful if the one way screws need to be removed.
Ismael Doyle (verified owner) –
Should come with a small case to keep all the parts together…would be very helpful.
Joan Kassulke (verified owner) –
The screw remover worked like a charm in removing one way screws to a security door. The key is to use the appropriate size bit and adjust and tighten at the proper depth. You MUST drill slowly with appropriate amount of pressure applied to drill on screw.