RYOBI 4 in x 36 in. Belt and 6 in. Disc Sander
$159.00
This Ryobi Bench Sander is the easiest way to sand your projects fast, helping you create beautiful, smooth surfaces that look professional.
In stock
Description
RYOBI introduces the 4 in x 36 in. Belt and 6 in. Disc Sander. This 4 in. x 36 in. Belt/Disc Sander is a combination belt and disc sander that delivers 120-Volt of power to help provide efficient operation. The cast-iron base helps keep the sander stable during use so you can apply the desired amount of pressure and achieve consistent results. The sanding bed can be positioned horizontally or vertically for your convenience and the lockout power switch helps provide safety. Backed by the RYOBI 3-Year Manufacturer’s Warranty, the 4 in. x 36 in. Belt/Disc Sander includes an 80 grit sanding belt, an 80 grit 6 in. sanding disc, a work table, a work support, a miter gauge, a switch key, and an operator’s manual.
- Belt arm can be positioned from 0°-90° to allow vertical or horizontal sanding
- Multi-position work table provides 0°-45° support while disk sanding
- Tool-free belt tension release makes changing sanding belts quick and easy
- Large belt tracking knob for easy belt positioning
- Cast iron base for additional stability and less vibration
- Integrated dust port for optimal dust collection
- Induction motor for quiet, dependable operation
- Miter gauge included for use on 0°-45° pivoting table
- 3-year manufacturer’s warranty
- Includes: (1) BD4601G Belt Sander, (1) 80 grit 4″ × 36″ sanding belt, (1) 80 grit 6″ sanding disc, work table, work support, miter gauge, switch key, and operator’s manual
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 43.07 lbs |
|---|---|
| Dimensions | 22.00 × 11.00 × 13.00 in |
| Amperage (amps) | 4.3 |
| Model | BD4601G |
| Variable Speed | No |
| Tools Product Type | Power Tool |
| Table Width (in.) | 12.4 |
| Table Length (in.) | 22.2 |
| Reconditioned | No |
| Power Tool Features | No Additional Features |
| Portability | Bench |
| Minimum belt sanding speed (ft./min.) | 1900 |
| Belt length (in.) | 36 |
| Maximum belt sanding speed (ft./min.) | 3450 |
| Dust collection type | Port |
| Cord Length (ft.) | 6 |
| Condition | New |
| Color Family | Green |
| Bench & Stationary Tool Type | Belt Sander |
| Belt width (in.) | 4 |
| Voltage (volts) | 120 |
Reviews (81)
81 reviews for RYOBI 4 in x 36 in. Belt and 6 in. Disc Sander
Only logged in customers who have purchased this product may leave a review.
Related products
Sanders
Model# BO4900V
Sanders
Model# EB4424
Sanders
Model# DS321 1
Sanders
Model# 382
Sanders
Model# BO4556
Sanders
Makita 3 Amp 5 in. Corded Palm Grip Random Orbital Sander with Dust Bag, Hard Case
Model# BO5030K
Sanders
Bosch 2.5 Amp 5 in Corded Single Speed Palm Random Orbital Sander/Polisher
Model# ROS10
Tito Gorczany (verified owner) –
This the second one of these I have owned. I gave my old blue version to my father and he is still using it. The only thing I wish it had was a speed variable dial. For the price this is an excellent piece of equipment
Garnett Pfeffer (verified owner) –
Easy to put together and easy to use. Very impressed!
Reba Ward (verified owner) –
I Pam Tanner bought it for a friend. Stuart absolutely loves it!
Deon Langworth (verified owner) –
Easy set up and belt change. Have only used it once since my purchase. It will definitely do the work for the primary need I have. My own creativity will be the test of projects yet to come.
Hettie Cole (verified owner) –
If you are a DIY person this is the tool for you. It it will save you lost of time than having to hand sand things. The best part of this tool is that it heavy and does not move. You can run through 100s of wood pieces through it very quickly. Its a time saver. Take a look at the video below. https://www.youtube.com/watch?v=zRNj7gd6y70
Leonie Wilkinson (verified owner) –
works great, easy to put together.
Jedediah Haag (verified owner) –
The unit fits my needs completely. It is a high quality belt disc sander.
Kylee Batz (verified owner) –
Had to sand 85 spindles for porch railing. Made quick work of job and sanded perfect. Belts ran true with just minor adjustment. Belt replacement was a snap. Fairly quiet with minimal vibration.
Kieran Herzog (verified owner) –
Good for the money. Home hobby use only. Miter gauge and work table are cheap and flimsy. Needed to add a shim washer to get the miter table to align properly.
Perry Fritsch (verified owner) –
Its okay for light work and small to medium jobs, but I wouldn’t have this running constant for more than an hour or so, If that. After maybe 20-30 mins use you can feel the heat radiating off of the gear box. The main issue i have is that the belt runs against the right side no matter what you do, even after moving it the belt slides to that same spot once turned on. So I reccomend having an extra belt or two in whatever grit you use most on hand just in case. Annoying for sure but can be overlooked if you only need a few minutes use out of it at a time. There’s a guard you’re supposed to install over the belt and when you do its either too tight and keeps the belt and disc from spinning or, the belt runs against it so you’re sanding a metal plate aswell as your piece of stock..Instructions are also terrible, not helpful in the least. I put it together by following the picture on the box and have an extra piece i don’t even know what to do with so heres hoping its not important.
Roberta O’Keefe (verified owner) –
I had been looking for a sander that I didn’t have to hold in my arthritic hand. This will work wonderfully for me.
Tressie Runte (verified owner) –
Good sander for the price. The brace on the belt sander flexes a little but not bad. Otherwise does the job well.
Edwin Kuphal (verified owner) –
Probably a good buy for the money! Seems to have adequate power and solid construction. Belt tracks really well in the horizontal, haven’t used the vertical. Belt and disk speed are positive.Very satisfied so far.
Dariana Ledner (verified owner) –
Good product at a good price with a coupon. Easy setup and works well.
Monte Pacocha (verified owner) –
I bought this a few weeks ago not sure if I would get much use out of it, but now that I have it I can’t stop using it for every little thing. I would definitely buy again knowing now how much use I get out of it.
Kristoffer Heaney (verified owner) –
Bought is for when my Ryobi palm sander just isn’t enough. Mounted to 3/4 inch board and clamped to bench which allowed me to utilize its full potential.Really enjoy this tool.
Kirk Bogan (verified owner) –
it work great for me. It was easy to setup.
Tillman Hansen (verified owner) –
This is a pretty good product for small projects. One item that could be better is the support and alignment of the horizontal surface plate for using the disk sander. It is a bit cumbersome to get exactly at 90 degrees.
Enola Herman (verified owner) –
Used this for a dozen or more times to do minor finishing work, and it seems to do just fine. 4/5 stars because the manual is not at all clear about how/what parts to use to replace the sanding disc, and because the degree marks on the protractor are inaccurate (use a square to align guides properly). The adjustment from horizontal band sanding to vertical is a little time-consuming and involved. Would buy again (if I ever needed two).
Eddie Murazik (verified owner) –
Great for the money.