Sabrent 2.5″ SATA to USB 3.0 Tool-Free External Hard Drive Enclosure
$6.99
In stock
Description
Convert an internal 2.5″ SATA or SATA II hard drive or SSD into an external portable drive with the black 2.5″ SATA to USB 3.0 Tool-Free External HDD Enclosure from Sabrent. Featuring a USB 3.0 reverse-compatible host interface, this enclosure connects to a USB port on your desktop or laptop computer via the included cable to deliver data transfer rates of up to 5 Gb/s. The enclosure has a screwless mounting design for easy installation and plug-and-play functionality out of the box.
Additional information
| Weight | 0.33 lbs |
|---|---|
| Dimensions | 8.6 × 6.2 × 0.9 in |
| Number of Bays | 1 x 2.5" |
| Maximum 2.5" SATA Drive Height | 9.5 mm |
| Connections | 1 x USB Type-A (USB 3.1 / USB 3.2 Gen 1 (5 Gb/s)) |
| Compatible Drive Interface | SATA, SATA II |
| UASP Support | Yes |
| Hot-Swap Support | Yes |
| Operating System Support | Windows, macOS/OS X |
| Material of Construction | Plastic |
| RAID Controller | None |
| Status Monitoring | LED Indicator |
| Dimensions (W x H x D) | 4.9 x 3.1 x 0.5" / 12.45 x 7.87 x 1.27 cm |
Reviews (8)
8 reviews for Sabrent 2.5″ SATA to USB 3.0 Tool-Free External Hard Drive Enclosure
Only logged in customers who have purchased this product may leave a review.
Related products
Internal Drives
Internal Drives
WD 2TB Red Pro 7200 rpm SATA III 3.5″ Internal NAS HDD (Retail)
Internal Drives
CRU-DataPort RTX110-3Q 1-TrayFree SATA Hard Disk Drive Enclosure
Internal Drives
Internal Drives
Rowena Kilback (verified owner) –
I have used several of these with SSD Drives for external backups and have been very pleased. Solid construction, good performance and price.
Isidro Lind (verified owner) –
Product is good and works as intended. The issue I had is my fault for not researching better. I purchased a Crucial SSD to replace laptop spinning hard drive. The free Acronis cloning software from Crucial requires a Crucial drive to be seen in the system. The software saw Sabrent attached drive and not the Crucial drive in it I wanted to clone to. After using a different free cloning software I was successful. This is no fault of the product and I am quite happy with the external drive. The on/off switch is handy and the drive comes with a 30ish inch (aprox 76cm) Type A connector USB cable. The case is plastic and the cover slides off. No tools are required. The case has an internal rubber sponge pad to keep the drive pushed forward into the contacts. I wasn’t comfortable with the force required and the angle of insertion. If you use something to push back and hold the pad during installation, the drive drops right in and slides easily into the connector. Considering the cost of the product I think this is non-issue, just something to be aware of. The pad holds the drive firmly in place.
Clark Mills (verified owner) –
Have not had it very long, but installation of the SSD took about 20 seconds. Zero tools. Done. By far easiest enclosure I’ve used.
Immanuel O’Hara (verified owner) –
Just snap a 2.5 SATA drive into the slots, then press it past the rubber support and you are ready to connect a new drive to your USB slot!
Bud Koelpin (verified owner) –
I had an old laptop that no longer functioned/started up, but a hard drive that had various personal files I needed to recover. The Sabrent External Hard Drive Enclosure worked easily, was a simple plug & play, and allowed me to insert my laptop hard drive into the enclosure and connect to a separate computer. All my files were accessible and easily recoverable. With it’s great price, you can’t go wrong.
Barrett Hill (verified owner) –
This worked flawlessly with my Samsun 870 EVO 2TB SATA III drive. I really like the free software available to perform data transfers. The on/offf switch is also great.
Susie Pagac (verified owner) –
It would be nice if the length of the cable was designated since the over 2 foot cable that came with the enclosure was more than sufficient and thus I would not have had to purchase the extra 3 foot one, which I don’t really need !!!
Friedrich Bailey (verified owner) –
I like having enclosures for SSDs and M.2 drives, and this Sabrent works well. I have several of them.