Seagate 16TB IronWolf Pro 7200 rpm SATA III 3.5″ Internal NAS HDD (CMR, Retail)
$367.49
In stock
Description
Designed for use in 1-16 bay NAS environments within commercial and enterprise settings, the 16TB IronWolf Pro 7200 rpm SATA III 3.5″ Internal NAS HDD from Seagate is built to withstand 24/7 operation, or 8760 hours per year. This 16TB drive has been equipped with a SATA III 6 Gb/s interface, a rotational speed of 7200 rpm, a 3.5″ form factor, and a 256MB cache, providing users with ample storage capacity with data transfer speeds of up to 250 MB/s. The IronWolf Pro also has an MTBF rating of 1.2 million hours, a workload rate of up to 300TB per year, and an annualized failure rate (AFR) of 0.73%. Seagate includes a limited 2-year Data Recovery Service that helps you retrieve damaged data in the event of a mechanical error, accident, or natural disaster, and overall protection is provided by a limited 5-year warranty.
Additional information
| Weight | 1.71 lbs |
|---|---|
| Dimensions | 7.85 × 6.05 × 2.45 in |
| Quantity | 1 |
| Non-Recoverable Read Errors per Bits Read | 1 in 1015 |
| Dimensions (W x H x D) | 4 x 1 x 5.8" / 101.6 x 25.4 x 147.32 mm |
| Storage Altitude | -1, 000 to 40, 000' / -304.80 to 12, 192 m |
| Operating Altitude | -1, 000 to 10, 000' / -304.80 to 3048 m |
| Storage Humidity | 5 to 95% |
| Operating Humidity | 5 to 95% |
| Storage Temperature | -40 to 158°F / -40 to 70°C |
| Operating Temperature | 41 to 140°F / 5 to 60°C |
| Storage Vibration | 2.27 G / 10 to 500 Hz |
| Operating Vibration | 12 G / 10 to 1500 Hz |
| Storage Shock | 200 G / 2.0 ms |
| Operating Shock | 50 G / 2.0 ms |
| Current | 2.0 A at 12 VDC |
| Supported Voltage | 5 VDC, 12 VDC |
| Power Draw | 7.6 W (Active)<br />5.0 W (Idle)<br />1.0 W (Standby) |
| Mean Time Between Failures (MTBF) | 1.2 Million Hours |
| Storage Capacity | 16 TB |
| Noise Level | 3.2 dB (Active)<br />2.8 dB (Idle) |
| Cache Memory | 256 MB |
| Interface | SATA III (6 Gb/s) |
| Read Speed | Maximum: 250 MB/s |
| Latency | 4.1 ms |
| Drive Type | HDD |
| Form Factor | 3.5" |
| Spindle Speed (RPM) | 7200 RPM |
| Load/Unload Cycles | 600, 000 |
| Heads | 18 |
| Platters | 9 |
| Areal Density | 1172 Gb/in² |
| Disk Sector Format | 512e |
| Annualized Failure Rate (AFR) | 0.73 % |
| Endurance (Total Bytes Written) | 300 TB |
| Warranty Length | Limited 5-Year Warranty |
Reviews (134)
134 reviews for Seagate 16TB IronWolf Pro 7200 rpm SATA III 3.5″ Internal NAS HDD (CMR, Retail)
Only logged in customers who have purchased this product may leave a review.
Related products
Internal Drives
CRU-DataPort RTX110-3Q 1-TrayFree SATA Hard Disk Drive Enclosure
Internal Drives
Internal Drives
Internal Drives
Internal Drives
Internal Drives
OWC Envoy Pro EX USB 3.1 Gen 2 Type-C External SSD Enclosure
Internal Drives
Felicia Vandervort (verified owner) –
I store a lot of my editing projects on this and so far it’s been great. Fast enough for my needs.
Roger Farrell (verified owner) –
Bought these drives for my QNAP NAS for video editing. Theses drives have high reliability and great warrant which is why I purchased them.
Pamela Hahn (verified owner) –
Installed 2 of the Ironwolf Pro 10TB drives in a NAS configured as RAID 1. Work out of the box. Only negative so far, and not much of one, is that they are noisy if you have the NAS next to your desk.
Zaria Mohr (verified owner) –
zero issues.
Noble Torp (verified owner) –
I have been slowly adding to my Synology NAS. These hard drives have been rock solid for over a year so far with no issues. All 12 disks I have received have been good and have not produced any issues or loss of data. The speed is typically for an optical drive. Wish I could afford solid state, but they don’t make large enough drives in an affordable range yet to hold this much data.
Minnie Maggio (verified owner) –
My Ironwolf Pro drives have lasted for years and years with every iteration. I expect the same from this monster as well. I have my previous 3 6 TB drives set up in a RAID for speed and they back up to this nightly. Perfect for my 4 bay drive enclosure.
Kellen Quitzon (verified owner) –
I had purchased several drives over a year ago and just added 2 more drives to the RAID. All drives so far have been flawless with 24/7 operation since being installed.
Domingo Abbott (verified owner) –
I was able to set up my NAS in minutes and all my devices are now visible for using the 2 drives for storage. They are quite and have a 5 year guarantee.
Herman Morar (verified owner) –
I’ve been using these Seagate IronWolf NAS hard drives for many years in a Synology NAS server unit . Never had any issues with their hardware!
Helmer Kerluke (verified owner) –
These are great drives that are running well in my Synology DS1821+ NAS. The usual B&H customer service was outstanding and it’s good to know they’re standing behind me for any support I need.
Olen Lueilwitz (verified owner) –
I’ve had two of these in the last year – my youngest drives, and have already both failed. Terrible product. First two drives in 14 years of being a filmmaker that have failed on me.
Lupe Barrows (verified owner) –
Excellent drive at an excellent price.
Adelbert Lesch (verified owner) –
In trying to decide what drives to put into my NAS, many people commented about excess noise from 7200rpm drives, I have not experienced that at all with this drive. I have two in a Synology DS218J NAS and so far, all is well.
Jack Stamm (verified owner) –
Packaging well done, easily recyclable. The drive joined its 16TB Ironwolf companion in the Synology NAS. Can’t report on the noise level because the NAS is downstairs, away from my desktop. All in all, well satisfied.