Stanley Sweetheart No. 92, 7 3/4 in. Shoulder / Chisel Plane
$96.02
The No. 92 Sweetheart Shoulder Chisel Plane is constructed of cast iron for long lasting durability. This converts from a shoulder plane to a chisel plane. It comes with finger grip and precision ground cast-iron base for accuracy.
In stock
Description
This shoulder plane has a blade width of 3/4 in.. The base is made from cast iron. This plane has the ability to change from a shoulder plane to a chisel plane.
- Dual purpose – converts from a shoulder plane to a chisel plane
- Iron is made from extra-thick 1/8 in. (3.18mm) A2 steel for excellent edge retention
- Precision-ground cast-iron base for accuracy
- Finger grips for control
- Replacement Blade 12-144
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 1.53 lbs |
|---|---|
| Dimensions | 7.40 × 3.30 × 1.60 in |
| Base Length (in.) | 6.109 |
| Blade Width (in.) | 0.75 |
| Hand Tool Type | Plane |
| Handle Material | Metal |
| Model | 12-140 |
| Tools Product Type | Hand Tool |
Reviews (49)
49 reviews for Stanley Sweetheart No. 92, 7 3/4 in. Shoulder / Chisel Plane
Only logged in customers who have purchased this product may leave a review.
Related products
Cutting Tools
Model# 63324
Cutting Tools
Model# 20-029L
Cutting Tools
Model# 20-045
Cutting Tools
Model# 0190MC
Cutting Tools
Wiss 9-3/4 in. Compound Action Straight and Left Aviation Snips
Model# M1RS
Cutting Tools
Model# 122100R
Cutting Tools
Model# 8501H
Cutting Tools
Model# MKJKIT
Shemar Hagenes (verified owner) –
It is a very versatile tool and after sharpening it I was able to get whisper thinking shavings.
Owen Orn (verified owner) –
Awesome purchase for the price
Lillie Bode (verified owner) –
This chisel comes ready out of the box. If you do a lot of rabbets and fine joinery, it makes fitting joints so much easier. Shaving router or table saw joints to fit perfectly was always a challenge until I bought this little monster. Easy to adjust and holds the settings.
Viva Crist (verified owner) –
Have only had for about a month but has performed as intended with no issue at this point. Over all quality seems good and I am happy with it.
Serenity Conroy (verified owner) –
Overall this seems to be a good plane. The blade was flat and took only minutes to hone. The sides are square to the bottom. The sole is not flat. The portion in front of the throat was not in plane with the portion to the rear of the throat although just slightly. The rear portion of the sole had a slight hollow. It took about 45 minutes using adhesive backed sandpaper to get it level.
Shana Hermann (verified owner) –
the plane was well made but fit and finish was poor. I worked for 2 hours with files and sand paper to remove sharp edges on the parts that meet your hand to make it comfortable to use.
Dayton Harvey (verified owner) –
I have been doing woodwork for a few years and have purchased several Stanley Sweetheart planes and other Sweetheart products in the last few months and have been pleased with the quality and finish of the tools. All have worked well out of the box with little cleanup and set up. Great tools and good service by Home Depot.
Rosamond Greenfelder (verified owner) –
Great plane. Good iron. Needs to be sharped to get premium results
Kyle Hickle (verified owner) –
Base not quite 90 degrees from sides, so when using to shave tenons, shoulder will be off. Otherwise, OK. Finish good, blade cut OK. Suggest touch-up of blade to polish to razor-sharp edge.
Devante Simonis (verified owner) –
Overall was ok at best, lots of unnecessary sharp corners an 1/16 out of square on the sole, Still I was able to tune it and it now works as is supposed to
Rudy McCullough (verified owner) –
GREAT worked with just a 6000 touch on blade
Ernestine Runte (verified owner) –
A very good shoulder plane from there new and old design. the the price is great. The plane does double duty and feals good in the hand. Remember a plane is only as good as the sharpness of the blade. a dull blade will make a very pricy plane work poorly
Darrel Botsford (verified owner) –
Ergonomic, feels good in the hand! Cutting is sharp and smooth
Adrien Cartwright (verified owner) –
Wasn’t exactly ready for prime time out of the box. I took it apart, degreased it, flattened the sole (didn’t need much work) and sharpened the blade. Then reassembled and it works like a champ. Good tool for the price.
Nathan Hahn (verified owner) –
By no means is this the top of the line shoulder plane, but for the price it does very well. It came sharp and ready to use right out of the box, once you wipe the excess packing oil off it.
Evan Jakubowski (verified owner) –
I checked this tool for squareness when I received it and it’s perfect. The blade as received is sharp enough but I recommend it be re-sharpened with a micro-bevel for perfect cuts. The very small incremental depth of cut changes is very nice. Good product, quality is what you’d expect from Stanley.
Keeley Christiansen (verified owner) –
Great little plane. Razor sharp right out of the box. Shave paper thin with minimal tuning.
Bruce Dare (verified owner) –
It is a sweet plane and for the price you can’t beat it.
Mavis Rolfson (verified owner) –
Worked great right out of the box. Wish I had it last year!
Sonia Thiel (verified owner) –
This is the second #92 plane I purchased, the first one was returned due to poor machining and multiple scratches and nicks ( I know its a tool and not a sculpture, still, I like to put my own dings and scratches on it). So, this second one arrived in better condition but still not what I have come to expect from the Sweetheart series. Gunky grease on the moving parts, a raggedy edge on the iron, small scratches on the body but at least square and flat where it counts. After cleaning and honing it is very usable. Older and more favorable reviews of this plane mentioned Mexico as the country of origin, the two I recieved were made in China.