The FATMAX 24 in. magnetic level has an accuracy of 0.0005inches/inches. The MaxEdge cover the vial for a smooth consistent level surface. A single piece of aluminum is used in this levels construction.
- Rare earth magnets provide ultimate holding power on metal surfaces
- Block vials provide maximum accuracy of 0.0005 in. /in. (0.5 mm/m)
- MaxEdge bridged center vial for continuous marking surface and durability
- Single-piece, aluminum box-beam structure for durability and accuracy
- Large ergonomic rubber over-molded hand grip
- Shock-absorbing end caps hold up to heavy use
- Non-marring side bumpers helps prevent damage to finished surfaces
Jaylon Johns (verified owner) –
try this level out it was great . Love the magnet . check bubbles out and set perfect . The only thing I didn’t like was no 45 degree bubble .Other wise this is one of the best levels that I have used.
Chaz Crist (verified owner) –
This level does exactly what I need it to do. With the 3 levels, it’s always easy to see the reading and I love having the ability to use a magnetic side or a non-magnetic side. There are holes on the ends that allow me to hang the level when not in use and I appreciate the built in handle. The machining is very accurate and the whole thing feels sturdy.
Xavier Kemmer (verified owner) –
I received a 24 inch FATAX Magnetic Level in exchange for my use and honest review.My husband and I used it to help in our project to replace bricks on our planter in the back yard. It had a good heft so it was really stable and stayed in place. The markings were easy to read. I have not had an opportunity to try out the magnetic portion of it. Thank you.
Donny White (verified owner) –
First project I used the Fatmax level on was some shelving around the house that had been neglected for awhile. Doing it myself all the handles made it simple to check levels. Can’t wait to use for more complex projects.
Douglas Orn (verified owner) –
I have had this level for about 2 weeks now and it has replaced my other levels. Having the magnetic feature and the easy hand grips makes life so easy. I will be purchasing more variations of this level. I highly recommend!!!
Luciano Weimann (verified owner) –
I have been working with metal studs and this level is the one I use for the magnet
Solon Breitenberg (verified owner) –
This level is easy to read and handle. Has a good feel and balance. Straight and true
Etha Trantow (verified owner) –
I am so happy with this level , It is heavy duty , and the one thing I really like is the length , it has so many uses and magnetic . I will have many uses for this level in the future !
Sydni McCullough (verified owner) –
A nice 24″ (box-style, sturdier than the i-beam styles) level! The 3 magnets on the bottom side are a great feature. They are super useful in plenty of scenarios, and when your situation doesn’t require a magnet, they are recessed just a hair so to not alter the base’s contact with your work piece. The handle is also a nice touch. And the top/horizontal spirit vial is readable from both the top-down and both sides, which turns out to be quite useful.
Laila Stehr (verified owner) –
This Magnetic Level is GREAT. It has the feel of not being a toy like most other levels. The Magnet is great for when you are working on items that are magnetic, like having an extra set of hands, and with the Bridged Vial, IT IS another SWEET SPOT. When you come to the Shock Absorbing Ends, the Real Sweet Spots of this LEVEL. How many times have you dropped your level and wonder if it still spot on? Not with these SHOCK ABSORBING END CAPS
Dana Wunsch (verified owner) –
This is the sturdiest and most lightweight 24 inch level that I have. Easy to use, and rubber ends help keep in place and protect the level if you drop it.
Kaci Harvey (verified owner) –
I found the 24-inch Fatmax magnetic level to be the perfect size for most indoor finish projects. The level is well built, designed, and looks like it will withstand many years of hard use. The bubbles are easy to see and read. This is a fine tool…
Orval D’Amore (verified owner) –
I am a Commercial millwork installer, I use lasers and levels daily. I used this level in place of my German made level over few days. The results were the same, accurate both plumb and level. Compared and tested as I installed. Quality build, More end protection for those accidental falls or drops. Hand grip holes fit well, Vial view bright and recess to avoid scratches, medium weight, strong body type, added feature has magnets. If you are installing metal cabinets or door frames. This would be a great additional to your tools.
Ciara Barrows (verified owner) –
The 24″ length is perfect for almost every job. I have a 4 ft. level and bullet level and sometimes they just are too long or short. I also like the convenience of the built in handle and magnets, although I find many aluminum or stainless steel surfaces so it won’t stick to them.
Karli Stark (verified owner) –
This is a beautifully made precision all aluminum body level with a lot of thought and planning put into it’s design with added features to make it way better than the average level. -Nice hand hold grip-Protective end caps-Thoughtful stand off pads on one side to keep metal from contacting the wall or other surfaces you want to avoid marking.I have not had need of the magnetic feature yet but can see an opportunity looming when I install metal door frames and doors.
Makayla Sauer (verified owner) –
I do not know how many levels I have owned. Cheap, expensive, tiny, antique.But this is far and away one of the best, most versatile and easy to use and handle.Highly recommended.
Coralie Grady (verified owner) –
I bought this level for retaining wall and masonry work in my backyard and have to say this has been tremendously helpful. The build quality is very high (It slipped my hands a couple times from 3 feet height and it still didn’t ding or dent). The level has good even precision and has a good grip handle too.
Ellis Ratke (verified owner) –
I have been working with metal studs and this level is the one I use for the magnet
Ray Dooley (verified owner) –
The first thing you notice about the Stanley Tools Fatmax Magnetic Level is the weight it is approx 1lb 5oz. I found this Magnetic level to be well constructed and durable. Easy to use in any way to lay it down, and easy to read. I like the way they have protected the bubbles from damage. The measurements we used them for were right on the mark. The handles are put in a great place for handling the measurer Also like the protective edges on each end to protect what ever your working on.
Dillon Hammes (verified owner) –
If you’re looking for a 24 inch level, you can’t go wrong with the Stanley Fatmax. The feature that stands out to me the most is the ‘MAXEDGE’ bridged center vial which allows for a continuous marking edge. A small but significant feature, this provides for more utility which is something that I value very highly when selecting tools for everyday use. The overall design and construction quality of the level is also noticeably high with the body being that of aluminum and the addition of shock absorbing end caps. Overall, this is definitely the best level of this size that I have used and it has earned a place in my gang box.