Stanley Hack Saw Blades (5-Pack)

52 reviews for Stanley Hack Saw Blades (5-Pack)

1. Rated 5 out of 5

   Dawn Douglas (verified owner) – May 24, 2022

   The blades are strong and hold up well to the abuse of cutting various materials.

2. Rated 5 out of 5

   Serena Pfeffer (verified owner) – May 13, 2022

   I used the blades on pvc,metal tubing,copper tubing and plastic tile. They worked well and have not worn down much. Cutting strength is good.

3. Rated 5 out of 5

   Clifford Walter (verified owner) – May 9, 2022

   I got these in and started putting them to work. It cuts through a stainless steel line I had real easily.

4. Rated 5 out of 5

   Anne Swaniawski (verified owner) – April 22, 2022

   Needed something for a tight straight cut and this did the job.

5. Rated 5 out of 5

   Brianne Mills (verified owner) – April 17, 2022

   Sharp blades that didn’t snap cutting plastic at odd angles.

6. Rated 5 out of 5

   Alyce Lehner (verified owner) – March 20, 2022

   I used the blades to cut some conduit and some water line that was in between floor joist and near the subflooring while doing some repairs. . A large blade wouldn’t fit. These blades didn’t disappoint, and cut through with ease.

7. Rated 5 out of 5

   Elizabeth Nitzsche (verified owner) – March 13, 2022

   Cuts 1/8 thick 6061 aluminum easily.Made short work of a complex project.

8. Rated 4 out of 5

   Lori Ernser (verified owner) – March 12, 2022

   Work well and keep a sharp edge. My boy was play around cutting all kinds of stuff. The blade stayed sharp the whole and never broke.

9. Rated 5 out of 5

   Shanny Becker (verified owner) – February 17, 2022

   I have several projects that include some requirements for fine/delicate sawing of both metal and plastic parts. These blades have done the job leaving a smooth finish that requires minimum sanding/polishing. These are well finished blades with sharp teeth. These blades have stood-up my use and I consider these as speciality blades for fine fitment of parts.

10. Rated 3 out of 5

    Keanu Stiedemann (verified owner) – February 9, 2022

    As this was my first time using a mini hacksaw, I was a bit underwhelmed. I was cutting a steel tube, about the diameter and thickness of a shotgun barrel and ended up burning through three blades before calling it quits as they literally just weren’t cutting it. While I like the concept, in practice I think the mini hacksaw is a bit of a novelty. If you are considering a mini hacksaw and these blades, I would recommend also getting a full size hacksaw and some bimetal blades as you may be needing them.

11. Rated 5 out of 5

    Marlen Spencer (verified owner) – February 8, 2022

    My grandson came over and ask me if we could build something. So I started to collect tools for him and found I did not have blades for my child saw. So we went got new saw blades. He came home and cut up almost all my scrape wood.

12. Rated 4 out of 5

    Betsy Simonis (verified owner) – January 31, 2022

    These are blades for a Stanley 6″ mini hacksaw. Great for small detail work on soft woods. It will not be of much use working with anything harder than pine. The welds are good. Teeth quality is good and seems like it will hold up.One complaint that should be an easy fix for the packaging department. There was little to no glue holding the plastic to the cardboard backing. The blades fell out during shipping. Could have lead to bending of one of the blades.I would recommend

13. Rated 3 out of 5

    Newell Davis (verified owner) – January 31, 2022

    these are basic replacement blades for your mini hacksaw. Nothing special and not the longest lasing, but for light duty use on smaller non-tempered metals, they’ll do just fine. The tabs to hold in your frame on either end are solid and brazed in place. Uses would include cutting small bar stock, shortening a 1/4″ or smaller bolt, etc. Don’t get me wrong, these are a decent mid-grade hacksaw blade.

14. Rated 4 out of 5

    Alia Boyle (verified owner) – January 30, 2022

    When I first received them I thought boy are these small, and I had to find one of my hacksaws that would fit them. Once they were in place I tried them on some EMTand they cut like butter. They are fine for small jobs but I guess they were designed for that.

15. Rated 5 out of 5

    Hertha Stark (verified owner) – January 5, 2022

    Have a collection of various pullsaws and hacksaws, and about 4 jr hacksaws. Have various brand name blades for those jr hacksaws that while costing more than the stanley’s are in all honesty not nearly as sharp. These blades leave a nice clean cut in aluminum, brass, conduit, and work surprisingly well on popular, pine, and maple woods I’ve been working with.

16. Rated 4 out of 5

    Gerhard Jones (verified owner) – December 24, 2021

    just another blade cuts very good but better than competition??

17. Rated 5 out of 5

    Aylin Veum (verified owner) – December 21, 2021

    I’ve had these almost a month now and have only used one so far. The crafts I have been producing require a lot of precision cuts with tight tolerances and small radii. This blade has performed awesomely in each application. Almost a month and the blade is still sharp as the day first used. Package is 5 blades and at this rate I’ll never have to buy a blade again, but if I do, they’ll be Stanley Blades!

18. Rated 5 out of 5

    Estelle Towne (verified owner) – December 19, 2021

    I used these as replacements for my Stanley Junior Hacksaw. The quality is just like the ones that came with the original saw. I normally use these for cutting PVC. Would recommend as a replacement for your saw.

19. Rated 5 out of 5

    Zion Windler (verified owner) – December 11, 2021

    Blades are easy to install and change. They are fine cutting and long lasting with very light cutting resistance.

20. Rated 5 out of 5

    Anissa Rowe (verified owner) – November 17, 2021

    Have cut steel pipe & aluminum door supports with no problem or hang-ups. Nice straight cuts. These blades are a winner!