StarTech ST121UTP VGA Video Extender Over Cat5 (Black)
$83.53
In stock
Description
The black ST121UTP VGA Video Extender over Cat5 from StarTech allows you to extend your VGA video signal by up to 500’ (150m) and connect up to 4 displays (2 local and 2 remote) from that single source. The ST121UTP from the ST121 Series is a bundled kit including both a local transmitter and a remote receiver unit, offering a complete solution for scenarios in which remote monitor displays are required.
The local unit features a single VGA input as well as 2 VGA outputs giving you the ability to view and split your source VGA signal to 2 independent displays locally. The VGA video signal is then sent over standard 4 pair Category 5 or better UTP cable to the remote unit which also features 2 additional VGA outputs giving you the freedom to display your VGA source on up to 4 monitors in total.
The included mounting bracket provides versatile mounting options such as a wall, desk, or cabinet.
Additional information
| Weight | 1.8 lbs |
|---|---|
| Dimensions | 9.6 × 7.4 × 3.7 in |
| Port | 1 |
| Cabling Type | Cat 5e UTP or better |
| Connector 1 | Local Unit Connectors:1 x RJ-45 Female1 x VGA (15 pin; high density D-Sub) Male2 x VGA (15 pin; high density D-Sub) Female |
| Connector 2 | Remote Unit Connectors:1 x RJ-45 Female2 x VGA (15 pin; high density D-Sub) Female |
| Maximum Distance | 500' (150 m) |
| Supported Resolutions | 1440 x 900 @ 150.00’ (45.72 m)1280 x 1024 @ 300.00’ (91.44 m)1024 x 768 @ 500’ (152.40 m) |
| Output Voltage | 9 VDC |
| Output Current | 0.6 A |
| Center Tip Polarity | Positive |
| Enclosure Type | Aluminum |
| Dimensions (L x W x H) | 2.40 x 3.30 x 0.80" (6.10 x 8.38 x 2.03 cm) |
Reviews (3)
3 reviews for StarTech ST121UTP VGA Video Extender Over Cat5 (Black)
Only logged in customers who have purchased this product may leave a review.
Related products
Kamille Champlin (verified owner) –
I used this item to attach my Camera DVR to my TV. NO power supplies needed is a big plus and I ran about 75ft of Cat6. It works perfectly.
Candice Hagenes (verified owner) –
Best ever remote hookup for a projector. Run a CAT5 cable from the computer in the back to the projector in the front- instant video. This was a replacement for one purchased 6 years ago, which began distorting colors. New set fixed it right up.
Benjamin Waelchi (verified owner) –
Replaced a failed Kramer unit with similar performance. Needs power at both ends. Kramer sent power over the CAT5, so only needed power at one end.