SUNEX TOOLS 3/8 in. Drive Metric Crowfoot Flare Nut Wrench Set (10-Piece)
$25.21
Add this innovative breakthrough in comfort and support to your maintenance work by choosing this SUNEX TOOLS Drive Metric Crowfoot Flare Nut Wrench Set.
In stock
Description
The Sunex 9710M ⅜ in. Drive Crowfoot Flare Nut Wrench Set includes 10 pieces of all sizes between 10mm and 19mm–the most common sizes used for automotive repair. Each wrench is made with drop forged alloy steel and designed with an open side and a 15-degree offset at each end. This set comes mounted on a storage rail for convenient transport and storage.
- Includes 10 Crowfoot Flare Nut Wrenches from 10mm to 19mm
- Open side at each end allows for easy access over lines and tubing while still providing 5 sides for a maximum grip on fasteners
- 15-degree offset provides clearance for your fingers and other obstructions near the fastener
- Drop forged alloy steel material provides strength and comfort
- Comes on a convenient storage rail for transport and storage
- Lifetime Warranty with SUNEXpress
Additional information
| Weight | .32 lbs |
|---|---|
| Dimensions | 2.00 × 2.00 × 2.00 in |
| Features | No Additional Features |
| Hand Tool Type | Wrench Set |
| Individual/Set | Set |
| Measurement Standard | Metric |
| Model | 9710M |
| Number of Pieces | 10 |
| Tool Set Type | Wrench Sets |
| Tools Product Type | Hand Tool |
Reviews (28)
28 reviews for SUNEX TOOLS 3/8 in. Drive Metric Crowfoot Flare Nut Wrench Set (10-Piece)
Only logged in customers who have purchased this product may leave a review.
Related products
Wrenches
Model# 507-10
Wrenches
Model# 9008
Wrenches
Model# 507-12
Wrenches
Klein Tools 15/16 in. Extra Capacity Adjustable Wrench with Plastic Dipped Handle
Model# D507-6
Wrenches
Model# 9107
Wrenches
Model# 9014
Wrenches
Model# 9106
Wrenches
Klein Tools 1-1/2 in. Extra Capacity Adjustable Wrench with Plastic Dipped Handle
Model# D507-12
Alan Gutkowski (verified owner) –
Worked great on hydraulic line that was impossible to get off. Well built solid buy.
Leann Witting (verified owner) –
This tool is very strong. Loosend a very rusty brake line nut. These wrenches are a little bit thick for tight spaces. Did what I needed them to do. Very satisfied
Zander Fisher (verified owner) –
This tool is great for doing lines that require a crows foot. This tool gives you more contact with the nut and is less likely to strip it. the tool has a great finish and works well.
Heaven Yundt (verified owner) –
Thought it would help in tight places. not really
Maynard Murray (verified owner) –
A well thought-out Crowfoot set. I like the fact that the wrench openings are angled slightly in relation to the drive square for easier access. The squared edges give you more of the wrench flat to engage things such as flare nuts that are softer and more easily deform. I like the fact that the 18 mm is included also. You don’t see these available in all of these sets. This is a very usable tool set.
Carolyne Aufderhar (verified owner) –
I like that this set is a no skip 10-19mm set covering most sizes that you run into working on cars. You can never guess when you’ll need one of these so it’s good to be prepared.Machining and finishing on the set is good, but the stamped numbers are in some cases strangely spaced and or inconsistent. I’m still glad though that they are stamped rather than just having etched / printed markings which can wear off over time. There are no recesses in the wrenches to hold onto the retention ball on your ratchet / extension but they were a tight enough fit that they stayed on my extension just fine.
Carol McClure (verified owner) –
If you have to work on power steering units, old hose fittings, or compression fittings, this is your tool. The design is much better than the typical open end wrench-type design – it is compact and has more edges covered. This design fits over the close fittings on power steering pumps and does not spread when a lot of pressure is applied. Think of it as an oxygen sensor-type application for hoses and tubing. It just works better than any other crowsfoot design I’ve previously used. For open end wrench replacement duties I use a breaker bar for extra torque – the length helps – and the tool did not spread or mar the fitting. The right tool for tight quarters and especially power steering work
London Monahan (verified owner) –
Worked good