Synology E10G18-T1 10GbE PCIe Expansion Card
$104.99
In stock
Description
Designed for select Synology NAS servers, the E10G18-T1 10GbE PCIe Expansion Card from Synology has a single RJ45 port that supports 802.3an 10 Gb/s Ethernet, 802.3bz 2.5 and 5 Gb/s Ethernet, 802.3ab Gigabit Ethernet (1 Gb/s), 802.3u Fast Ethernet (100 Mb/s), and 802.3x Flow Control. It has a low-profile/full-height bracket, a PCIe 3.0 x4 interface, operates in full duplex mode, and can auto-negotiate between 10 Gb/s, 5 Gb/s, 2.5 Gb/s, 1 Gb/s, and 100 Mb/s speeds.
Additional information
| Weight | 0.3 lbs |
|---|---|
| Dimensions | 7 × 5.3 × 1.3 in |
| Networking Ports | 1 x 10Gb Ethernet (RJ45) |
| Host Connection | PCIe 3.0 x4 (Full-Height/Low-Profile Slot) |
| Supported IEEE Standards | 802.3ab, 802.3an, 802.3bz, 802.3u, 802.3x |
| Transfer Rates | Full-Duplex Mode: 10 Gb/s |
| Power Source | Bus Powered |
| Operating Temperature | 32 to 104°F / 0 to 40°C |
| Storage Temperature | -5 to 140°F / -20 to 60°C |
| Operating Humidity | 5 to 95% |
Reviews (8)
8 reviews for Synology E10G18-T1 10GbE PCIe Expansion Card
Only logged in customers who have purchased this product may leave a review.
Related products
Wired Networking
Wired Networking
Wired Networking
Wired Networking
Cisco RV345P 16-Port Gigabit PoE+ Compliant Router with Dual WAN
Wired Networking
Wired Networking
Baylee Kuhlman (verified owner) –
As described. No hiccups. Given today’s transfer speeds, they should come as stock installs.
Coby Baumbach (verified owner) –
Decided to get this for my 1821+ since I wanted actual 10-gig support. Works like a charm.
Paige Renner (verified owner) –
I have an iMac Pro (2017) that has a built-in 10GbE NIC. Adding this card to my Synology 1621+ and running a direct Cat6 between the two (I just need it for myself) gave MASSIVE performance increases. This is an upgrade that was well worth the expense.
Donato Windler (verified owner) –
I’m getting 250MB/s on a 2.5GB hub and 550MB/s on a 10GB hub with existing CAT6 wiring, which is a substantial improvement from the 100MB/s on standard Gigabit Ethernet. I’m happy with my purchase & installation was a breeze.
Monte Reynolds (verified owner) –
Been working great so far… I just wish Synology didn’t have vendor lock-in, requiring either their adapter or a select few 3rd party adapters. Because of this, I will likely move on from Synology once the proprietary power supply inevitable fails. If I build my own NAS, I could at least service the thing myself and use a wider variety of hardware. Every single time I either need an upgrade or have a problem, I regret buying a Synology NAS a little bit more.
Mikel Bednar (verified owner) –
Excelent connection and speed with 10g network, read/write 1000/900 over network
Francesca Hilpert (verified owner) –
Optimal upgrade, simple installation and immediate operation. Be sure to set up your 10Gb network, cable, 10Gb ports, enable Jumbo frames compatible in MTU 9000 and try to incorporate a ssd cache in your NAS.
Modesto Ebert (verified owner) –
Popped this card in my DS1621+ Synology and that was that. 10 gigabits and FASTTT transfers. The shipping, packing, and product were all excellent.