TEKTON 1/2 in. Drive Impact Screwdriver Set (7-Piece)
$19.40
TEKTON Drive Impact Screwdriver Set is compact and comes with lightweight. Extremely versatile and suitable to use in garage.
In stock
Description
Loosen corroded brake caliper screws, rusted body panel fasteners or frozen bolts with ease using the TEKTON 1/2 in. Drive Reversible Manual Impact Driver Set. This unique tool converts a hammer strike into a powerful, high-torque force, freeing even the most stubborn fasteners. It’s compact and lightweight and doesn’t need any air or power source, so you can use it in the garage, or take it on the road or out in the salvage yard to quickly remove parts long exposed to the elements. Reversible drive is great for loosening left-hand thread fasteners. Extremely versatile, it can drive the included hex shank screwdriver bits, other universal 5/16 in. hex shank bits, or any 1/2 in. drive impact socket in your toolbox. Between jobs, the set packs neatly away in the durable organizer case. As is often said, you won’t use this tool every day, but when you need it, there is no substitute
- Instant impact force loosens rusted or frozen screws without damaging them
- Forward and reverse drive direction
- Drives included screwdriver bits or any 1/2 in. drive impact socket
- Comfortable handle with non-slip knurled grip
- Frees corroded brake caliper screws and other vehicle or outdoor fasteners exposed to the elements
- Goes anywhere, no air or power source required
- Always Guaranteed: no time limits and no fine print, just personalized solutions
- 1-pc. 1/2 in. drive manual impact driver
- 2-pc. 5/16 in. hex shank slotted screwdriver bits: 5/16, 3/8 in.
- 2-pc. 5/16 in. hex shank Phillips screwdriver bits: #2, #3
- 1-pc. storage case
Additional information
| Weight | 1.75 lbs |
|---|---|
| Dimensions | 8.00 × 3.30 × 2.30 in |
| Assembled Depth (in.) | 8 in |
| Minimum tip size | #2 |
| Shaft Length (in.) | 0 |
| Requires Hub? | No Hub Required |
| Remote Access | No Remote Access |
| Ratcheting | No |
| Number of Pieces | 7 |
| Model | 2910 |
| Maximum tip size | #3 |
| Assembled Height (in.) | 2.3 in |
| Magnetic Tip | No |
| Individual/Set | Set |
| Handle Material | Composite |
| Handle Length (in.) | 0 |
| Hand Tool Type | Screwdriver Set |
| Drive Style | Multi-Bit |
| Assembled Width (in.) | 3.3 in |
| Tools Product Type | Hand Tool |
Reviews (38)
38 reviews for TEKTON 1/2 in. Drive Impact Screwdriver Set (7-Piece)
Only logged in customers who have purchased this product may leave a review.
Related products
Screwdrivers & Nut Drivers
Klein Tools 2-Piece Stubby Magnetic Tip Nut Driver Set- Cushion Grip Handles
Model# 610M
Screwdrivers & Nut Drivers
Model# 32483
Screwdrivers & Nut Drivers
Klein Tools 7-Piece Hollow Shaft Nut Driver Set with 6 in. Hollow Shanks
Model# 89904
Screwdrivers & Nut Drivers
Klein Tools 11-in-1 Multi Bit Screwdriver & Nut Driver – Cushion Grip Handle
Model# 32500
Screwdrivers & Nut Drivers
Klein Tools 3/32 in. Mini Flat Head Screwdriver with 3 in. Round Shank- Cushion Grip Handle
Model# 607-3
Screwdrivers & Nut Drivers
Model# 68-010
Screwdrivers & Nut Drivers
Klein Tools 7-Piece Magnetic Nut Driver Set with 6 in. Hollow Shafts- Cushion Grip Handles
Model# 647M
Screwdrivers & Nut Drivers
Klein Tools 9-Piece Insulated Nut Driver Set with Case- Cushion Grip Handles
Model# 33524
Creola Moore (verified owner) –
A good handy little tool. If you don’t use it a lot.
Vance Reichel (verified owner) –
Exactly what I needed
Valentina Parisian (verified owner) –
Good product but didnt come with instructions on how to switch directions
Kayli Wiegand (verified owner) –
Works great like it allot yes recendment it
Cade Prosacco (verified owner) –
Does the job well. Time will tell if it lasts.
Jake Barton (verified owner) –
Impact driver was exactly what I needed.
Alaina Wilkinson (verified owner) –
Good tool, but very poor instructions
Newton Vandervort (verified owner) –
It came in a nice case and it works perfectly
Annie Wintheiser (verified owner) –
Good tool in nice package.
Allan Dooley (verified owner) –
Good tool. I used this on my TX650 clutch plate screws. Several whacks using this with a hammer and those stuck screws started to move. So happy!
Berneice Hegmann (verified owner) –
the right tool – great one
Gail Fadel (verified owner) –
I can’t complain too much about this tool. I played around with it a little to understand its operation and it works as advertized. My only suggestion to the manufacture is to include instructions. As rediculous as it sounds, i couldn’t figure out how to set the drive direction. I looked for a flip switch like on a standard ratchet, but there isnt one. I saw the F-R engraving on the shaft near the bit holder, but i still couldnt figure it out. I had to watch a youtube video to figure it out. You have to push in one of the collars and twist the shaft in order to change the drive. Not to mention there is not much rotation with each hit, so it was hard to tell if the screw was going in, out, or not moving at all. I put a alignment mark on the screw to see if it was moving. Anyways, i got it going in the screw out direction and left it there. I’m not sure why a person would want to hammer a screw IN, but it does have an option for that.
Fredrick Mann (verified owner) –
works well, directions on rotation changes are a little confusing at first however.
Rosemary Heaney (verified owner) –
More than we expected of this tool!
River Armstrong (verified owner) –
This tool was one of my best purchases. I thought I would only need it for one application, but then discovered I needed it multiple times. The ability to attach it to my pneumatic wrenches was the selling point. I love this tool!
Laila Gislason (verified owner) –
Worked perfectly for the purpose purchased.
Cassandre Nienow (verified owner) –
much much better than the harbor freight – takes a beating from the hammer and was able to unlock a 70 year old bolt.
Madalyn Reichert (verified owner) –
The product was easy to use and comes in a neat plastic case. I love it!
Lance Dare (verified owner) –
My older version of this tool from a different brand / vendor had larger screw drivers for impact loosening of larger screw slots (natural or ground in).This unit might as well be the 3/8″ drive version. SKIMPY.
Mustafa Rodriguez (verified owner) –
Worked perfectly for replacing rotors on car