TEKTON 6-1/2 in. Woodworking Vise
$43.65
Prepare yourself to conquer all your work projects at ease with the addition of this TEKTON Woodworking Vise.
In stock
Description
Mount the TEKTON 6-1/2 in. Woodworking Vise to the face of your bench and get a sure grip on your furniture, cabinetry and other woodworking and assembly projects. Add custom jaw pads made of hardwood, soft pine, plywood or other materials to prevent damage to fine surfaces. The vise is made from 30,000 PSI cast iron, so durability and dependability are built in. To maximize grip and prevent surface damage, the jaw travel is guided by twin steel rails to evenly distribute contact between the jaw and work piece. Installation options include positioning the vise flush with a bench top for quick and consistent alignment between work pieces. Turn the chrome-plated sliding T-bar handle and the jaw glides smoothly along the Acme-threaded main screw without binding or chattering, even as clamping pressure increases.
- Mounts to face of workbench to hold woodworking and assembly projects
- Cast iron construction (30,000 PSI tensile strength) with powder coated finish
- Jaws predrilled for custom jaw pads (not included)
- Chrome-plated steel sliding T-bar handle and steel guide rails
- Acme-threaded screw glides smoothly without binding
- Includes operation manual
- TEKTON tools are always guaranteed: if you ever have an issue, contact us
Additional information
| Weight | 5.51 lbs |
|---|---|
| Dimensions | 8.00 × 4.25 × 7.25 in |
| Clamping Strength (lb.) | 0 |
| Duty Rating | Standard |
| Hand Tool Type | Vise |
| Individual/Set | Individual |
| Jaw Capacity | 0 in |
| Jaw Width | 6.5 in |
| Material | Steel |
| Model | 53986 |
| Remote Access | No Remote Access |
| Requires Hub? | No Hub Required |
| Swivel base | No |
| Throat Depth | 2.375 |
| Tools Product Type | Bench Vise |
| Vise Type | Bench |
Reviews (15)
15 reviews for TEKTON 6-1/2 in. Woodworking Vise
Only logged in customers who have purchased this product may leave a review.
Related products
Fastening Tools
DEWALT 6 in. 100 lbs. Trigger Clamp with 2.43 in. Throat Depth
Model# DWHT83139
Fastening Tools
DEWALT 12 in. 100 lbs. Trigger Clamp with 2.43 in. Throat Depth
Model# DWHT83140
Fastening Tools
Model# MR33C
Fastening Tools
Model# 480
Fastening Tools
Model# 63302
Fastening Tools
Model# 66987
Fastening Tools
Arrow T50 3/8 in. Leg x 3/8 in. Crown Galvanized Steel Staples (5,000-Pack)
Model# 506IP
Fastening Tools
Model# TRE550Z
Lilly Lueilwitz (verified owner) –
Excellent for smaller wood projects.Tools & hardwood required for full assembly & to attach wooden blocks to both jaws of vice. Underside of my bench had an inset 2×4 support, so this meant drilling (3) 3/4” holes so the screw & guide bars would fit beneath bench when closing vice.
Violette Graham (verified owner) –
This vise is perfect for my woodworking hobby. There are better vises with quick release, etc. that for me is not necessary. I made my own bull nosed inserts for protecting my lumber pieces and am more than happy with the results.
Art Brown (verified owner) –
Not much to say. It’s a vise Of course you need to attach 2 small blocks on either inner side to provide protection to wood pieces. In order to attach blocks, and also allow yourself the ability to attach it to the work bench, it is necessary to first make desired blocks, then drill two holes the size of the screw heads thru the block at necessary location.Then attach the block to that side, then attach vise to bench using adequate hardware for strength.Then attach block on the other inner side. Then use adequate hardware to attach underside of vice to bench frame.This makes it very sturdy.
Lester Grady (verified owner) –
I looked at several different Vises and the Home Depot had the best one for the buck.
Domingo Predovic (verified owner) –
Perfect for what I was needing
Isobel Osinski (verified owner) –
Solid construction, smooth operation.
Kathryn O’Kon (verified owner) –
it’s a smaller vise for the home shop. everything works good. does not come with mounting screws so keep that in mind.
Erling Fadel (verified owner) –
While doing some wood work I need a vise that wouldn’t crush my wood project. The machinist vise was out of the question. Saw this vise for wood and so far it has been just what I needed. Installing it to the workbench was easy enough, just had to make some wood pads for it. Hols the projects well but it’s not a heavy duty vise so don’t overload it. Other wise it’s a good deal.
Yessenia Emmerich (verified owner) –
Pictures-only installation instructions were not helpful.
Paolo Ledner (verified owner) –
This vise is perfect for my woodworking hobby. There are better vises with quick release, etc. that for me is not necessary. I made my own bull nosed inserts for protecting my lumber pieces and am more than happy with the results.
Dale Sawayn (verified owner) –
It’s a vice. It works as expected.
Hunter Baumbach (verified owner) –
Had no trouble mounting this vice and started using it right away
Dortha Schmitt (verified owner) –
works as described no complaints here
Brigitte Kassulke (verified owner) –
Item is as advertised. Shipping time to the store was slow
Gerard Rolfson (verified owner) –
This little vice works great for me. There are more expensive units with more features, but I just needed something simple to add to my portable work bench. They can be mounted a couple of different ways, I chose to mount under the work surface so it’s out of the way.