WEN 16-inch Variable Speed Scroll Saw with Easy-Access Blade Changes
$100.58
Introduce a versatile device to your workstation with the choice of this extra ordinary WEN 2-Variable Speed Scroll Saw with EasyAccess Blade Changes. Base is machined to hold the 3 bit set.
In stock
Description
Remember when you could make intricate and artful cuts? Let the good times scroll with the WEN 16-Inch Variable Speed Scroll Saw. The 9/16-inch stroke saws through hard woods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16.25-by-10-inch table bevels up to 45 degrees for angled cuts. The adjustable air pump clears saw dust from your work area to give you a clear line of vision. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. Theres no need to fret about blade changes – the included blade holder accepts pinned, pinless, and spiral blades while the unique side panel swings open for easy access to the bottom blade holder. This package includes one 15 TPI pinned blade, one 18 TPI pinned blade, and one 18 TPI pinless blade. And because its a WEN product, your scroll saw comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.
- Unique side panel flips open for easy-access blade changes
- Variable speed goes from 550 to 1600 strokes per minute
- Spacious 16-by-10-inch table bevels up to 45 degrees for angled cuts
- Cuts wood up to 2 inches thick with a 16-inch throat depth
- Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a dust port, a foot lock clamp, and three 5-inch blades
- Backed by a two-year warranty
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 27.5 lbs |
|---|---|
| Dimensions | 26.30 × 12.80 × 14.75 in |
| Amperage (amps) | 1.2 |
| Blade Length (in.) | 5 |
| Color Family | Black |
| Condition | New |
| Construction Material | Cast Metal |
| Cord Length (ft.) | 6 |
| Corded Tool Type | Specialty Saw |
| Cordless/ Corded | Corded |
| Cuts Through | Wood |
| Included Accessories | Blades |
| Maximum wood thickness (in.) | 2 |
| Model | 3922 |
| Power Source | Electric |
| Power Tool Features | Keyless Blade Change, No Tool Blade Change |
| Tools Product Type | Power Tool |
Reviews (56)
56 reviews for WEN 16-inch Variable Speed Scroll Saw with Easy-Access Blade Changes
Only logged in customers who have purchased this product may leave a review.
Related products
Saws
Model# 6370-20
Saws
Model# DW304PK
Saws
Model# 6955-20
Saws
RIDGID Thru Cool 6 Amp 1-Handed Orbital Reciprocating Saw Kit
Model# R3031
Ardella Cartwright (verified owner) –
Excelente for my hobby projects.
Yadira Volkman (verified owner) –
I have used a portable jigsaw for curved and interior wood cuts for many years, but those days are over. This bench mounted scroll saw allows me to move the woodwork instead of moving my jigsaw, and this allows far more accuracy in both edge and interior wood cuts. The 16″ arm clearance and 16″X10″ work table size have proved quite adequate. I also really like the integrated air pump that keeps my work area clear while I am cutting. The controls on the saw which allow on/off operation, making angle cuts (up to 45 degrees), tightening the blade, and changing strokes per minute (550 to 1600 strokes/min) are well placed and easy to use. Removing or replacing the blade for doing inside the woodwork scrolling, (or just changing the pinned or pinless blades) is done easily without needing tools. Three blades are included. Using only 1.2 amps it plugs in to my standard workbench outlet and is ecologically friendly. I have not used it to cut thicker wood but it nice to know it will cut up to 2″ vertically. I had become fairly proficient with my jigsaw but this is making my wood scrolling both easier and more accurate. It is a very welcome addition to my garage.
Melyna Altenwerth (verified owner) –
This saw is an excellent value for the money. I wanted something that would be able to handle the fine blades (2/0) I used in marquetry and this saw does that just fine. The blade changes are easy to do and the saw holds the fine pin-less blades I use securely.Setting the table angle just right for the marquetry pieces to fit nicely means that you don’t want to change the table angle unless you have to. I discovered that with the table angled I could not open the side panel for access to the lower blade holder, so I removed the side panel completely. In addition, I found the holes in the table are large enough for small parts to drop into, so I covered the table with a thin sheet of melamine with just a small hole to pass the blade through. I typically run this saw near its lowest speed and at such low speeds there is nearly no vibration. At higher speeds you will need to secure the saw base to your workbench and might find the level of vibration to be an issue.
Bridgette Cole (verified owner) –
This product is perfect for me. It is easy to use and I loved the price.
Magdalen Weber (verified owner) –
Saw works great! Really like the variable speed control as it allows to cut soft, thin balsa without tearing it up. 1/4 inch plywood is a breeze with the higher speed. The dust blower is adequate and the work hold down is adjustable to obtain the correct pressure on the work piece. Have noticed that the center piece is a bit lower than the table as noted in other reviews. This can be fixed by laying a piece of material (thin cardboard or other product) under the piece. The vacuum attachment is nice!
Jacques Murazik (verified owner) –
Husband loves it
Lessie Kulas (verified owner) –
Saw is perfect for home hobby use
Ethelyn Bernhard (verified owner) –
Works well. It is what I wanted for my wood carving hobby.
Esperanza Wehner (verified owner) –
It’s ok. I bought it to replace a mid-80’s Craftsman scroll saw that’s motor had died. This saw was cheaper than repairing the old motor…. which should have told me something. It works, although it seems underpowered, and it is very light.- I managed to move the saw while feeding a larger sheet of wood in, so I’ll probably end up securing it to my bench top with bolts.If I was doing it over again, I’d want to browse saws in person rather than online and get something sturdier.
Rosemary Johnson (verified owner) –
Excellent product!
Myriam West (verified owner) –
I’m very happy with this WEN scroll saw. I have never used a scroll saw before but something I’ve always wanted to have for my crafting of wood plaques. So, my first try out—–it turned out great. The instructions to setup the saw were easy to follow and easy to do. I found very little vibration with the saw. In fact I only had mine sitting on a metal work bench (not screwed in). I didn’t experience any shifting or movement of the saw. I will say, the owners guide recommends adhering the saw to the work surface.I also, think the saw was pretty quiet.As I said, I’ve never used a scroll saw before and while I agree there’s a learning curve using it (as stated in the instructions), I was successful in cutting out a 6″ x 3″ seashell pattern from 1/2″ plywood, without breaking the blade. My pattern had one sharp turn and a bunch of curves. It took me about 10 minutes to cut out the shell. I don’t know whether that’s a reasonable amount of time or a long time, though.I’m very happy with this WEN saw and the results it produced.
Broderick Bernhard (verified owner) –
This is the first one I’ve ever used, I am still learning how to use it.
Justine Yost (verified owner) –
Compact and sturdy. Easy to use and not too loud. Haven’t put a tonne of hours in yet but it’s working very well.
Jayde McClure (verified owner) –
Just what I wanted. Thank you.
Darien Gulgowski (verified owner) –
Bought it to cut Kydex, and it works fine. Much quieter than expected.
Lelah Shanahan (verified owner) –
Vibrates a little but overall good for the low price
Evan Bailey (verified owner) –
The toolless blade change works great. It runs and cuts smoothly. It’s a really good value.
Elliot Lindgren (verified owner) –
Does everything I need it to do.
Mack Sawayn (verified owner) –
Does what I need. Mostly made of metal and appears durable.
Wava Daniel (verified owner) –
This WEN variable speed scroll saw is a great addition to my woodshop. It allows me to produce creative wood projects that are impossible to produce using other power saws. It’s inexpensive and has many features found in other saws costing two or three times as much. It has a 9/16 inch stroke and cuts through 2 inch thick hard woods quickly and easily. The motor speed can be simply adjusted with the turn of a knob. Blade changes are quick and easy thanks to a fold-down side panel and require no tools. Not all was well with this saw. WEN, if you’re listening, all three of the base hold down screw holes are partially blocked by a part of the saw, making a straight shot with a driver impossible. This issue could have been avoided with some engineering forethought.Notable features:16 inch throat depth550 to 1600 SPM variable speed 1.2 amp motor2 inch cut capacity at 90 degrees45 degree left table tilt with built-in angle gaugeAccepts pinned, unpinned and spiral bladesThumb screw blade adapter for tool-free blade changesIncludes three spare blades and a hex wrench27.5 lb. weightAluminum non-corrosive table1-1/2 inch dust collection portAdjustable blade sawdust blowerLockable power switchTwo year warranty