WEN 2.5 Amp 9 in. Benchtop Band Saw
$136.18
Introduce a versatile device to your workstation with the choice of this extra ordinary WEN 2-Benchtop Band Saw. Base is machined to hold the 3 bit set.
In stock
Description
Remember when you had a saw that was both compact and powerful? The WEN 9 in. Benchtop Band Saw attacks boards with cuts up to 3-1/2 in. deep and 9 in. wide. The 2.5 Amp motor rotates the included 1/4 in. blade at up to 2500 ft. per minute. The design of this saw uses 59-1/2 in. blades anywhere from 1/8 to 3/8 in. in width for both intricate and powerful cuts. The spacious work table measures in at 12-1/4 x 11-7/8 in. in size and can be beveled up to 45°. This package includes a miter gauge, an onboard 2-1/2 in. dust port, a fence for creating straight cuts, and an adjustable blade guard. Ball-bearings give the blade smooth operation and a long lasting life for years of dependable service. And because it’s a WEN product, your WEN 9 in. Benchtop Band Saw comes backed by a 2-year warranty, a nationwide network of skilled service technicians and a friendly and helpful customer phone line all to make sure you remember WEN.
- 2.5 Amp motor rotates the blade up to 2500 ft. per minute
- Create cuts up to 3-1/2 in. deep and 9 in. W
- Uses 59-1/2 in. blades anywhere from 1/8 to 3/8 in. in size
- Spacious 12-1/4 x 11-7/8 in. work table bevels up to 45°
- Includes a 1/4- in. wide blade, a 2-1/2 in. dust port, a rip fence and a miter gauge
- Backed by a 2-year warranty
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 40 lbs |
|---|---|
| Dimensions | 35.00 × 18.00 × 13.00 in |
| Amperage (amps) | 2.5 A |
| Maximum Speed (rpm) | 1720 |
| Voltage (volts) | 120 |
| Tools Product Type | Power Tool |
| Table-Top Material | Aluminum |
| Table Width (in.) | 11.88 |
| Table Tilt Right Max (degrees) | 45 |
| Table Tilt Left Max (degrees) | 0 |
| Table Length (in.) | 12.3 |
| Power Tool Features | Lockout Power Switch, No Tool Blade Change |
| Portability | Bench |
| PT Horsepower (Hp) | 1/3 |
| Model | 3959 |
| Minimum Blade Width | 1/8 |
| Minimum Blade Length | 59.5 |
| Maximum Blade Width | 3/8 |
| Band Saw Type | Vertical |
| Maximum Blade Length | 59.5 |
| Included Accessories | Blades, Miter Fence, Rip Fence |
| Dust Port Size (In.) | 2.5 |
| Dust Collection Method | 2.5 in. Dust Port |
| Cutting Capacity Width / Depth Of Throat(In.) | 9 |
| Cutting Capacity Height / Height under Guide (In.) | 3.5 |
| Cuts Through | Wood |
| Cordless/ Corded | Corded |
| Cord Length (ft.) | 6 |
| Construction Material | Steel |
| Condition | New |
| Color Family | Black |
| Bench & Stationary Tool Type | Band Saw |
| Work Table Surface | 12.3 in. x 11.88 in. |
Reviews (62)
62 reviews for WEN 2.5 Amp 9 in. Benchtop Band Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Saws
Model# DW716
Saws
Model# DW311K
Saws
Model# 6955-20
Saws
Model# DW317K
Leatha Mosciski (verified owner) –
Easy to set up. Good cuts
Wilfred Jenkins (verified owner) –
Works great totally satisfiwd
London Dicki (verified owner) –
After unpacking the saw I noticed that the cutting depth did not meet my requirements. The spec given on the box where misleading.
Nathen Leannon (verified owner) –
Very please with product and works great.
Kenny Bins (verified owner) –
Works great totally satisfiwd
Brielle Romaguera (verified owner) –
A Band Saw for the simple DIYer. This came 99% assembled. It was pretty accurate out of the box, but can be easily adjusted to align perfectly. The detailed instructions are all you need. I cut some wood to build out some kitchen drawers. It was much quicker than using my handsaw! The quality on this is much better than competing brands. Everyone that has seen it at our house it totally jealous. It is a must-have for anyone that does home projects! I will be purchasing the dust collection attachment to help keep the garage clean.
Kimberly Boyer (verified owner) –
Hard to figure out how to connect the dust port.
Malachi Willms (verified owner) –
This saw is amazing. It definitely meets and exceeds expectations, I especially love that it comes with a straight cut guide
Mittie Legros (verified owner) –
the saw is just what I expected and has made my work much easier. what didn’ t help was the home depot store on 2221 north post road indianapolis , in lost track of the saw for two weeks. and it sat in the store waiting for some one to find it.while i had to wait. very unhappy with the way home depot handed this situation.
Devan Stiedemann (verified owner) –
I’m very pleased using my Wen 9 inch bandsaw model 3959 right out of the box. I’ve ripped and crosscut, oak, pine and plywood with no problems. The blade that comes with it Is great for that. It’s a little large for cutting tight curves. I plan on buying narrow blades as needed.
Ramon Padberg (verified owner) –
Good power for a small band saw. Cut through 1″ board with ease. Fits easily on a work bench. Packaging was good. Arrived at home with some damage to box but no damage to equipment. Nice 1/4 turn knobs to open unit to get to internals. Supplied fence has a tight fit & holds it’s position. The miter gauge has a slight wobble (1-2 degrees) but still works well. Instructions are full size and contains an exploded view for ordering parts. Saw table held in place by two knobs and holds it’s position. Good for the DIY’er.
Vanessa Kirlin (verified owner) –
Can’t tell you how many times I’ve used this bandsaw and how handy it is to have. Haven’t had it long but I’m so glad I invested in it. So handy for quick cuts, scrolling, notching and trimming wood. It has saved a ton of time and is fun to work with. Clean cuts, smooth and quiet. Great buy!
Vinnie Grant (verified owner) –
Easy to assemble. Well built. Perfect for the DIY’er
Agustina Rippin (verified owner) –
easy to use
Winona Swift (verified owner) –
very impressed!
Anya Heaney (verified owner) –
Overall, I am pleased with this saw. Opened the package, inspected all the contents for possible damage; everything looked good. Assembled the band saw per the instructions; no issues. Using the manual, ensured table, blade and tension were set correctly. Everything looked good from the factory; nothing required any adjustment. Performed a test cut on piece of 1/4″ pine – everything worked. Next did some cuts on a cedar 2×4 that was handy. Did some cross cuts and rips about 8″ length wise. Also performed some curved cuts in the cedar and some pine. Don’t have any hard wood on hand at this time. Looking forward to using on some projects. Going to mount it on a plywood base so it can be clamped to my workbench for extra stability during use. Hooks right up to my shop vac for dust control.
Esperanza Kuhlman (verified owner) –
I bought this band saw to cut some wood pieces when they needed cut. I was amazed on the noise this makes. It might be noisey but not loud. It does not make a whole lot of mess. A mist of saw dust that can be easily clean up using your vacuum cleaner that you use in your home.There is really nothing that I don’t like about this band saw. I would recommend the tool to everyone if woodworking is a hobby. If you are a woodworker that is your career. I wood buy a floor model.
Lukas Glover (verified owner) –
Product was ready to use out of the box. Have used it to cut out some figures. I think the adding of a light would make saw even better. I have not been able to attach rip fence; mot clamp down into position. Very happy with the saw and hope to have and use it for a long time.
Melvina Langosh (verified owner) –
Does the Wen tabletop band saw come with a blade? I have read reviews and the saw discriptions but i don’t see anything about the blade
Thelma Champlin (verified owner) –
Did not sit level. Wobbled sitting on the workbench. Bolted it down with a couple shims. Haven’t used it much but seems to be fine.