WEN 3.5 Amp 10 in. 2-Speed Band Saw with Stand and Worklight
$242.35
WEN’s Two Speed Band Saw with Stand and Worklight is your perfect companion for daily workshop applications. Comes with a work light.
In stock
Description
Reminiscent of your grandpa’s band saw, the WEN 10 in. 2-speed band saw is the perfect companion for any workshop. With a 3.5 amp motor and a 9-3/4 in. Throat, this beast will attack boards with cuts up to 6 in. Deep and 9-3/4 in. Wide. Two-speed operation allows for speeds of either 1520 or 2620 fpm. The design of this saw uses 72 in. Blades anywhere from 1/8 in. To 1/2 in. In size for a variety of both intricate and powerful cuts. The spacious work table measures in at 14 in. X 12-1/2 in. In size and can be swiveled up to 45°. This package includes a flexible work light to illuminate the worktable, a 3-in-1 dust port to fit a variety of dust extractor hoses (1-3/4 in., 2-3/4 in., 4 in.) A fence for creating straight cuts and a miter gauge for angled cuts. Ball-bearings give the blade smooth operation and a long lasting life for years of dependable service. The easy-to-assemble stand elevates the band saw without sacrificing space on the shop’s work bench. And because it’s a WEN product, your WEN 10 in. 2-speed band saw comes backed by a 2-year warranty, a nationwide network of skilled service technicians and a friendly and helpful customer phone line all to make sure you remember WEN.
- 3.5 Amp motor creates cuts up to 6 in. deep and 9-3/4 in. wide
- Uses 72 in. blades anywhere from 1/8 to 1/2 in. in size
- Spacious 14-1/8 in. x 12-1/2 in. cast aluminum work table bevels up to 45°
- Operates at 2 speeds of either 1520 or 2620 FPM
- Optional stand allows for either floor standing or bench top applications
- Includes a 2-year warranty, a stand, a work light, a 3-in-1 dust port, a fence, a miter gauge, and a 3/8 in. blade (6 TPI)
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 74 lbs |
|---|---|
| Dimensions | 40.00 × 15.00 × 17.50 in |
| Amperage (amps) | 3.5 |
| Maximum Blade Width | .5 |
| Tools Product Type | Power Tool |
| Table Width (in.) | 14.125 |
| Table Tilt Right Max (degrees) | 45 |
| Table Tilt Left Max (degrees) | 0 |
| Table Length (in.) | 12.5 |
| Power Tool Features | Lockout Power Switch, No Tool Blade Change, Stand Included |
| Portability | Stationary |
| Model | 3962 |
| Minimum Blade Width | .125 |
| Minimum Blade Length | 72 |
| Maximum Blade Length | 72 |
| Band Saw Type | Vertical |
| Included Accessories | Dust Blower |
| Cutting Capacity Width / Depth Of Throat(In.) | 9.75 |
| Cutting Capacity Height / Height under Guide (In.) | 6 |
| Cuts Through | Wood |
| Cordless/ Corded | Corded |
| Corded Tool Type | Portable Band Saw |
| Cord Length (ft.) | 6 |
| Construction Material | Steel |
| Condition | New |
| Color Family | Black |
| Work Table Surface | 12.5 in. x 14.125 in. |
Reviews (77)
77 reviews for WEN 3.5 Amp 10 in. 2-Speed Band Saw with Stand and Worklight
Only logged in customers who have purchased this product may leave a review.
Related products
Saws
Model# 6955-20
Saws
Model# DW304PK
Saws
Model# D28715
Saws
Model# DW317K
Jimmy Monahan (verified owner) –
The band saw was what I expected, I had not owned a Wen product before, the reviews were good & it did what I expected.I used the wood rods for the wheel assembly to move it around as needed.I build bird houses and mail boxes so this band saw will make the trim pieces much easier.
Sofia Zboncak (verified owner) –
Great buy. Plenty of power to rip and still have small footprint.
Fabiola Kris (verified owner) –
Perfect for my needs
Lane Wyman (verified owner) –
Drill was easy to assemble and cut easily through several different types of material.
Ari Swift (verified owner) –
Was easy to assemble and very well built
Axel Legros (verified owner) –
This bandsaw met all of my expectations. It is easy to take out of the box and put it in working order. I highly recommend it.
Madelynn Fritsch (verified owner) –
Base plate was badly warped.
Mariam Zboncak (verified owner) –
Everything I expected. Take your time setting up the blade and bearings; don’t forget the bottom bearings as well. I haven’t had great success with the fence system, but I think I just have to get to know the machine better and how it likes to be used.
Josiah Hackett (verified owner) –
This saw was easy assemble. Good all round saw.
Emmett Gleason (verified owner) –
Just as advertised. Great saw.
Leif Ryan (verified owner) –
Assembly was simple and minimal (assemble stand and mount table). Factory blade adjustments were right on. Current project required cutting several large pieces of 3/4″ plywood. Saw performed flawlessly. Plenty of power and accurate cuts. Surprisingly quiet. Very pleased. Only two negative comments, one of the blade-bearing adjustment screws came cross-threaded. Not a problem now but will have to tap in the future.Miter gauge is piece of plastic junk.
Maximillia Wyman (verified owner) –
Awesome homeowner saw! I use it for all sorts of hard and soft wood projects. The stock blade is slick, although I’ll purchase a narrow blade for tighter radius cuts. Assembly was easy, and worth the price. Very happy, it’s quiet running, easy to clean, and the quality is great.
Viola Fisher (verified owner) –
It performs great for my needs. I put locking wheels on it and it is easy to move around. Easy to put together and operate. The guide fence isn’t accurate at all but everything else lines up pretty good. I just made my own fence.
Ruben Boyer (verified owner) –
The drill was delivered and easy to assemble,no regrets
Kay Walker (verified owner) –
I followed the directions to assemble the bad saw base. When I laid the saw back onto a 4″ block (as instructed) I heard something slide inside the bandsaw, but I couldn’t recreate the sound.Three of the legs went on fine but one of the corners of the bandsaw base had a weld that was not grinded down and interfered with the leg seating properly. I had to make it work.After completing the assembly which was pretty easy I wanted to be sure the blade was adjusted properly. I saw a lot of online reviews that say there isn’t much adjustment. The blade would not move. I opened the upper panel and the wheel was against the upper guard. I stopped what I was doing and called tech support so I didn’t screw anything up. It was Sunday and they were closed so I left a message for them to call me back the following day. I decided to see if maybe the tracking was off bad so I loosened it and the wheel did pull back from the guard. But then I noticed the wheel was actually coming off the shaft. The clip had come off (that’s the noise I heard earlier). I couldn’t find the clip and had to drive into town to buy a package of clips as well as the tool to put the clip on. Problem fixed and blade adjustments made.I wanted to try the saw so I connected my shop vac with a 2-1/2″ hose to one of the three available dust ports but they don’t have one for that size. My Wen Planer has that size but not the bandsaw.I used it anyway and it cuts great. The thickest cut I made was 4″ and it did great.Now it’s Tuesday and I still haven’t heard from Wen Customer Support. Okay since I fixed the problem myself but I want to let them know and now I have another question.I purchased a 4″ to 2-1/2″ reducer but the 4″ reducer doesn’t fit on the 4″ dust port. What do I need to make this work?I called them again and had a 5-10 minute wait. I let them know that I never received a call back from them and let them know what the problem was. The tech’s silence just gave me the opinion he didn’t care. Maybe he did, maybe he didn’t. Then I explained that I had to purchase a reducer and it doesn’t fit either. I’m just trying to figure out what I need to buy to make this work. His suggestion was duct tape. Thanks! I was able to make something work.Overall I love it. I have other Wen products. I wish they were a little more consistent with the dust ports. I have 4 Wen products now and 6 different size dust ports but only 1 fits my shop vac hose. Maybe I’m wrong but I kind of figured a lot of DIYers would have shop vacs rather than expensive dust collection systems.
Florine Cummerata (verified owner) –
Setup and ready to go right out of the box. Didn’t need to align blade. The work light is very bright, almost to bright. Love it.
Orion Huels (verified owner) –
Went together easily. plugged it in and started it up and did several test cuts. Worked as advertised. it is difficult to move with the stand on so will make a portable stand so that I can move it around more easily. I had hoped that the legs were prepared for roller wheels but sadly they are not.
Lila Buckridge (verified owner) –
Great saw for the money. Just ordered a re-saw blade for cutting green wood.No bogging of motor, very satisfied, would definitely recommend.
Maeve Aufderhar (verified owner) –
Great saw especially for the price! Haven’t had any issues. Seems to be holding up well to everything I’ve thrown at it
Katharina Windler (verified owner) –
Order blades work great