WEN 3.5 Amp 10 in. 2-Speed Band Saw with Stand and Worklight
$242.35
WEN’s Two Speed Band Saw with Stand and Worklight is your perfect companion for daily workshop applications. Comes with a work light.
In stock
Description
Reminiscent of your grandpa’s band saw, the WEN 10 in. 2-speed band saw is the perfect companion for any workshop. With a 3.5 amp motor and a 9-3/4 in. Throat, this beast will attack boards with cuts up to 6 in. Deep and 9-3/4 in. Wide. Two-speed operation allows for speeds of either 1520 or 2620 fpm. The design of this saw uses 72 in. Blades anywhere from 1/8 in. To 1/2 in. In size for a variety of both intricate and powerful cuts. The spacious work table measures in at 14 in. X 12-1/2 in. In size and can be swiveled up to 45°. This package includes a flexible work light to illuminate the worktable, a 3-in-1 dust port to fit a variety of dust extractor hoses (1-3/4 in., 2-3/4 in., 4 in.) A fence for creating straight cuts and a miter gauge for angled cuts. Ball-bearings give the blade smooth operation and a long lasting life for years of dependable service. The easy-to-assemble stand elevates the band saw without sacrificing space on the shop’s work bench. And because it’s a WEN product, your WEN 10 in. 2-speed band saw comes backed by a 2-year warranty, a nationwide network of skilled service technicians and a friendly and helpful customer phone line all to make sure you remember WEN.
- 3.5 Amp motor creates cuts up to 6 in. deep and 9-3/4 in. wide
- Uses 72 in. blades anywhere from 1/8 to 1/2 in. in size
- Spacious 14-1/8 in. x 12-1/2 in. cast aluminum work table bevels up to 45°
- Operates at 2 speeds of either 1520 or 2620 FPM
- Optional stand allows for either floor standing or bench top applications
- Includes a 2-year warranty, a stand, a work light, a 3-in-1 dust port, a fence, a miter gauge, and a 3/8 in. blade (6 TPI)
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 74 lbs |
|---|---|
| Dimensions | 40.00 × 15.00 × 17.50 in |
| Amperage (amps) | 3.5 |
| Maximum Blade Width | .5 |
| Tools Product Type | Power Tool |
| Table Width (in.) | 14.125 |
| Table Tilt Right Max (degrees) | 45 |
| Table Tilt Left Max (degrees) | 0 |
| Table Length (in.) | 12.5 |
| Power Tool Features | Lockout Power Switch, No Tool Blade Change, Stand Included |
| Portability | Stationary |
| Model | 3962 |
| Minimum Blade Width | .125 |
| Minimum Blade Length | 72 |
| Maximum Blade Length | 72 |
| Band Saw Type | Vertical |
| Included Accessories | Dust Blower |
| Cutting Capacity Width / Depth Of Throat(In.) | 9.75 |
| Cutting Capacity Height / Height under Guide (In.) | 6 |
| Cuts Through | Wood |
| Cordless/ Corded | Corded |
| Corded Tool Type | Portable Band Saw |
| Cord Length (ft.) | 6 |
| Construction Material | Steel |
| Condition | New |
| Color Family | Black |
| Work Table Surface | 12.5 in. x 14.125 in. |
Reviews (77)
77 reviews for WEN 3.5 Amp 10 in. 2-Speed Band Saw with Stand and Worklight
Only logged in customers who have purchased this product may leave a review.
Related products
Saws
Model# 6185-20
Saws
Model# D28715
Saws
RIDGID Thru Cool 6 Amp 1-Handed Orbital Reciprocating Saw Kit
Model# R3031
Saws
Model# 6370-20
Antonina Cassin (verified owner) –
For the price and small size it isn’t bad. Takes a while making all the adjustments and setting it up. Tried resawing a 4 in wide piece of bubinga and it wandered a bit. I cant tighten the blade any further because it gets off center of the bottom wheel and you can only adjust the top wheel. Afraid to mess with the bottom wheel Its factory set with some jenky set screws. Still messing with it though I’ve only used it a couple times.
Jaida Will (verified owner) –
Everything about this saw is great, except for the motor. Needs more power, amps, hp.
Norberto O’Hara (verified owner) –
This is a Excellent product easy to assemble great to work with amazing product
Carolyn Nitzsche (verified owner) –
This is my first band saw purchase. I found it easy to assemble and operate. Makes me wish I’d purchased a band saw years ago.
Julian Tremblay (verified owner) –
Great product! I’m very happy with it.
Lori O’Conner (verified owner) –
Great saw for simple woodwork.
Daphnee Dare (verified owner) –
The saw was very easy to assemble and runs very smooth. I am very pleased with this purchase
Gerson Robel (verified owner) –
Nice and easy operate
Robyn Moore (verified owner) –
I’ve only used the band saw two times so, but I satisfied with the saw.
Lizeth White (verified owner) –
Great entry level band saw.
Soledad Schmidt (verified owner) –
It is so awesome I love it so much and it makes me very happy
Gabrielle Hodkiewicz (verified owner) –
Read all of the reviews on how difficult it is to calibrate the Wen band saw. I had no problem unpacking, assembling (table was a little difficult to get bolts in) and only had to make minor calibration adjustments (i.e., blade tension, table leveling). I will need to buy an adaptor for my dust collector as my hose size doesn’t fit Wen’s three (3) options. I called Wen’s call center to get the actual dust port size options which are not on the instructions. Wen answered immediately and gave me my answers plus some helpful tips. I haven’t changed the blade yet, but instructions seem to be straight forward. Nice sturdy & quiet piece of equipment. Very pleased. I highly recommend.
Hollis Yundt (verified owner) –
Very impressive machine for the money. Solid metal parts, some plastic knobs but they work fine, and the stability of the tabletop is impressive. All parts that need fine adjustment have good solid screws or mechanisms for fine adjustment (tabletop leveling, for instance). The adjustable rip guide is excellent also, and once properly aligned, the measurement can be trusted to the point where you won’t need to mark the piece with a pencil mark to be certain of the cut width. Also worth mentioning is that the instruction booklet is really good, covering safety, assembly, alignment, operations, maintenance and lubrication, troubleshooting, and an exploded-view parts diagram naming every single piece as well as providing a phone number and email address should you need help. One thing this comprehensive guide doesn’t mention, though, is that removing the table insert makes it a lot easier to verify and/or adjust the lower guide roller bearings. Overall a really valuable and capable addition to any home shop.
Durward Walsh (verified owner) –
The saw of bands cut the wood the end
Jaren Zboncak (verified owner) –
Good for hobby woodworking
Claud Jacobson (verified owner) –
I bought this for a birthday present for someone, but his birthday isn’t for another 2 weeks, so we haven’t even opened the box yet. Too soon to give an evaluation of it because of that.
Garfield Walker (verified owner) –
Works just as I expected, a good buy I’ll get more use out of it on my next project.