WEN 10 in. Drill Press with Laser
$159.00
Complete a variety of drilling procedures with the selection of this durable WEN Drill Press with Laser. Provides stability and easy bench top clamping.
In stock
Description
Remember when power tools were actually powerful. WENs 10 in. swing drill press with laser centering device is a powerhouse for your shop. Packed with features that you’ll find in larger, more industrial type drill presses, you can power through metal, wood and other materials with ease. Change from 5 speeds to target the exact RPM right for your project (570 RPM, 900 RPM, 1390 RPM, 2050 RPM, 3050 RPM). Rigid frame construction of cast iron provides sturdiness and reliability. Its powerful induction motor features ball bearings for an extended life, all combining together with smooth and balanced performance at any speed. The 1/2 in. chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. Base has predrilled holes for mounting onto a bench or work stand. The X-pattern laser locks-on to your drill points saving on guesswork and sparing expensive materials. A very versatile and valuable tool for any shop especially when you expand its range of use with optional accessories such as mortising attachment, drum sanders, circle cutters, etc. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill holes with laser precision, Remember WEN.
- 5-speeds offer a range of 570 RPM to 3050 RPM
- Linear scale depth adjustment sets the depth of the drill bit for repetitive and precise drilling
- 1/2 in. keyed chuck accepts large diameter bits; key storage included
- Cast iron base with mounting holes provides stability and easy bench top clamping
- Detail work light keeps work piece illuminated
- Cross hair laser guide increases drilling accuracy
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 51 lbs |
|---|---|
| Dimensions | 22.25 × 10.75 × 15.70 in |
| 360- Degree Swivel | No |
| Maximum Speed (rpm) | 3100 |
| Voltage (volts) | 120 |
| Tools Product Type | Power Tool |
| Spindle Travel | 2.5 |
| Portability | Bench |
| Number of Speeds | 5 |
| Model | 4210T |
| Minimum speed (rpm) | 600 |
| Magnetic | No |
| Amperage (amps) | 3.2 A |
| Lockout Power Switch | Yes |
| Cord Length (ft.) | 6 |
| Condition | New |
| Color Family | Black |
| Chuck Key Storage | Yes |
| Chuck Capacity | 1/2 In. |
| Built-In Light | Yes |
| Bench & Stationary Tool Type | Drill Press |
| Work Light | Yes |
Reviews (81)
81 reviews for WEN 10 in. Drill Press with Laser
Only logged in customers who have purchased this product may leave a review.
Related products
Woodworking Tools
Bosch 15 Amp 3-1/2 in. Corded Variable Speed Plunge Router with Dust Collection System
Model# 1619EVS
Woodworking Tools
Model# JP0610
Woodworking Tools
Model# DW682K
Woodworking Tools
Model# DW735
Woodworking Tools
Model# R4331
Woodworking Tools
Model# R24012
Woodworking Tools
Model# 5615-21
Woodworking Tools
Model# 7518
Reta Lakin (verified owner) –
It’s really nice. Not too hard to setup, but a bit of a process. Have acetone handy for cleaning mating surfaces as well as steel wool. Also need your own hardware to custom mount to your workbench. Instructions are good. My first drill press so can’t really speak from experience, but no complaints. I’d say the laser isn’t necessary, but you don’t have to flick it on. Laser is adjustable and seems to need a slight adjustment out of the box, but probably won’t bother with it.
Ole Heaney (verified owner) –
The drill does everything it should; I have no complaints about its performance. The laser crosshairs do a very good job when they work, unfortunately they hardly ever come on.
Darryl West (verified owner) –
I had another brand 10 in drill press for 10 years and it was a good one, but I wanted one with laser on it so I bought the WEN and love it. I was very simple to put together took about 30 minutes. The laser was dead on right out of the box.
Freddie Shields (verified owner) –
Easy to assemble it has lots of power and very well built
Donny Erdman (verified owner) –
Haven’t used it yet but seems well built. Easy set-up.
Rollin Orn (verified owner) –
Good product. It works as advertised. It is quite and well built. Great Drill Press for the money.
Jocelyn Adams (verified owner) –
Every thing was good easy to put together received on time quite only bad thing the light was burnt out. No satisfaction from seller
Jefferey Schamberger (verified owner) –
I have been very pleased with this drill press.
Cara Torphy (verified owner) –
It is difficult to adjust the angle left/right as the bolt requires a wrench. I tried a wrench, but cant budge it. Other than that, it is just as I expected.
Katelynn Tremblay (verified owner) –
Fits my needs for a small shop and beginner. I have already used it a lot and am very satisfied with build quality. I made sure to get one with a crank on the table (raise/lower) and that has proved to be a good decision. The work light is powered from the plug but the laser is powered by a battery compartment which I found odd. FYI: speed is changed by changing belts.
Jamey Ankunding (verified owner) –
Works very well..chuck wobbles a little with make it a little difficult to do what i do with it..but overall I would recommend..
Macie Friesen (verified owner) –
I’m not aware of a better garage drill press for the money. It’s easy to set up and perfect for the DIY’er. I’ve only used it a few times but I’m very impressed with its features. I especially like the laser and convenient work light. It’s a welcome addition to my workbench.
Adam Kertzmann (verified owner) –
The WEN 10” drill press so far is great ! Just what i was looking for ! Thanks Home Depot !
Lauriane Cole (verified owner) –
My husband is thrilled with it! Working great!
Marcelina Kris (verified owner) –
Would have given this press 5 stars except had to do a lot of work on the gearing (spindle shaft and main column updown motion) to remove burrs so the press would operate smoothly. Burrs and galling were internal so had to take the unit apart to repair. Also the main belt pulleys have burrs which will cut up the drive belt. After several hours of work to fix issues, that should have never left or even occurred at the factory, the unit is running fine now. I recommend because it’s going to be a great hobby press with a longer than others stroke, just not sure on the long haul. But based on my experience expect issues during assembly, hopefully you don’t. Also the belt is a plain vee belt design without a tensioner and should be a notched or cog design so it will run smoother.
Evie Mann (verified owner) –
Worked great for my first project! Super excited to keep working with it! I have no complaints!
Taya Dooley (verified owner) –
the product seems to be working very weil. It is very well made and well designed. I am pleased with it.
Deanna Grant (verified owner) –
The only thing that wasn’t right on was the laser, but did not expect that for the price.Overall, well built and much heavier duty than others at the same price.
Lafayette Hills (verified owner) –
Works as advertised.
Jaida Heidenreich (verified owner) –
Exactly what I was looking for. We have a larger drill press, but we do a lot of small parts and hobby work. This is perfect next to my work bench. I compared this to other brands, some less money-and by far this is the heaviest built and nicest looking in its price range. I would recommend.