WEN 3 in. Drill Press Vise
$14.10
WEN’s Drill Press Vise helps holding your workpieces firmly in place for safe and accurate drilling. Features durable cast iron construction.
In stock
Description
The WEN 3 in. Cast Iron Drill Press Vise clinches woods, metals, plastics and more, holding work pieces firmly in place for safe and accurate drilling. The heavy cast iron base along with the 4 onboard mounting slots provides stability to the vise during operation. The 3 in. jaws open up a total of 3-1/10 in. with a 1 in. throat depth to tightly grip boards and metals of a variety of shapes. Never worry about your work pieces budging again with the WEN 3 in. Cast Iron Drill Press Vise. Remember WEN.
- Grip woods, metals, plastics and more
- Cast iron construction provides stability to drilling operations
- 3 in. jaws open up to 3-1/10 in. with a 1 in. throat depth
- Includes 4 onboard mounting slots to securely fasten the vise to a drill press table
- Ideal for the WEN drill presses (models 4208, 4210, 4212, 4225)
- Industrial strength
- Fastens easily to drill press table slots with a quick release lever for simple disengagement
- Compatible with any WEN drill press ten inches or larger
Additional information
| Weight | 4.6 lbs |
|---|---|
| Dimensions | 8.30 × 2.40 × 7.30 in |
| Clamping Strength (lb.) | 1012 |
| Hand Tool Type | Vise |
| Individual/Set | Individual |
| Jaw Capacity | 3.1 |
| Material | Cast Iron |
| Model | 423DPV |
| Swivel base | No |
| Throat Depth | 1 |
| Tools Product Type | Hand Tool |
Reviews (55)
55 reviews for WEN 3 in. Drill Press Vise
Only logged in customers who have purchased this product may leave a review.
Related products
Fastening Tools
Yost 8 in. High Visibility All Steel Utility Workshop Bench Vise
Model# 908-HV
Fastening Tools
Model# 38-604
Fastening Tools
Model# TRE550Z
Fastening Tools
DEWALT 12 in. 100 lbs. Trigger Clamp with 2.43 in. Throat Depth
Model# DWHT83140
Fastening Tools
Model# DWHTTA7065
Fastening Tools
Model# DWS5026
Fastening Tools
Model# JT27
Fastening Tools
Model# TR110
Forrest Sipes (verified owner) –
this is a prefect tool
Rozella Streich (verified owner) –
This product is a much better fit for an 8″ drill press that a 4′ model. It is solidly built and easy to use. An added benefit is that it comes with two key bolts and nuts that are used to attach the vise to the drill press table.
Virgil Douglas (verified owner) –
Easy to use. Hold work very well.
Gerson Gibson (verified owner) –
Good quality drill press vise and works well when paired with WEN 8″ drill press.
Evie Stehr (verified owner) –
The Wen 3 inch drill press vise is a great accessory for a drill press. No drill press should be without a vise for some applications. This is perfect for my Wen 4208, 5-speed, 8 inch drill press. NO, it is NOT a cross vise or a slide table.Those that are new to shop tools will need to know this stuff. YES. you will have to set it up to find the center, so when you tighten up the vice, your work piece will be drilled in the proper location. NOT hard to do. Mine was delivered with a couple bolts nuts and washers that will fit into the t slots on a compound slide table. I use these pieces to bolt my vise to the drill press table. I was expecting to have to buy bolts and did so anyway since I needed 2 to bolt the drill press to a bench and the shorter bolts will come in handy for other stuff. Anyhow, I prefer to bolt my vise and drill press down. I don’t want my drill press or my work piece traveling all over the place. I like that this vice has several ways I can attach it to the table. I can also relocate this vise to my workbench for other applications. For small, light duty projects and the price, you can’t go wrong. I like using this vise to keep my work piece in place for safety reasons. Some shop teacher I had in school was a stickler for machine safety and said to use a vise or clamp down your work when using a drill press to avoid injury to your fingers or hands. He was a smart man so this vise was a no brainer. I never forgot his words of wisdom. Anyhow, get this vise for your drill press.
Onie Lesch (verified owner) –
Very happy with it.
Liana Harris (verified owner) –
This is probably the most well-made drill press vise I’ve seen. The fit of the various parts is really good, and the vise operates very smoothly. For the money, I don’t see how you could get a better vise.
Sonny Kovacek (verified owner) –
It’s a vise. It holds things and saves my fingers. That’s why I had to get it. I like my fingers.
Anjali Waelchi (verified owner) –
Fit my 10” just right
Marjory Marvin (verified owner) –
The 3-inch fit’s a small bench drill press. The 4-inch didn’t work on it. It works as expected. I have both 3 and 4 inches. One for the drill press and one for the work bench.
Verla Bahringer (verified owner) –
Vice fits my 8″ drill press deck perfectly and secures items without a lot of fuss and muss. A must have for all DIY’ers.
Carrie Fahey (verified owner) –
Good product for the money – works great
Eric Thompson (verified owner) –
Was exactly what I wanted and needed. The insulated jaws allow my wood to be tightened without leaving marks. It fits well on my tabletop drill press.
Janet Marquardt (verified owner) –
I have not used this vise yet, but I did check it out to make sure that it fit my drill press, and it fits fine.
Candelario Jast (verified owner) –
Very nice and fit my drill very well(It should includ screws as most reviews said )