WEN 3.25 in. Industrial Strength Benchtop and Drill Press Tilting Angle Vise
$30.95
Complete all your work projects at ease and efficiently with the addition of this WEN two-Industrial Strength Benchtop and Drill Press Tilting Angle Vise.
In stock
Description
Remember when you could make fine-tune adjustments with the simple turn of a wheel. The WEN 3.25 in. Tilting Vise provides 90° of stable and reliable clamping action. Great for incremental drilling and precision work. With a locking cradle and positive work stops every 15° (0°, 15°, 30°, 45°, 60°, 75°, and 90°), this vise is the perfect companion for your benchtop, your drill press, your work table, and more. Made from Heavy-duty powder-coated cast iron, the WEN Tilting Vise grips tightly onto your work pieces, providing over 1900 lbs. of clamping force. The 3.25 in x 1.75 in. jaws open up to 3.25 in. W. The fixed jaw features a V-shaped groove to hold round objects either vertically or horizontally while the removable handles help users easily install the vise into tight spaces. With six 1/2 in. mounting brackets positioned around the outside edge of the vises base, the WEN Angled Vise is compatible with the majority of drill press tables on the market, including the WEN 4210 and 4212 10 in. Drill Presses, the WEN 4214 12 in. Drill Press, the WEN 4225 15 in. Drill Press, and the WEN 4227 17 in. Drill Press. And because its a WEN product, your cross vise comes backed by a 2-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.
- 3.25 by 1.75 in. jaws open up to 3.25 in. W
- Constructed of industrial-strength powder-coated cast iron
- Features 7 positive tilting stops; 1 every 15° from 0° to 90°
- Five 1/2 in. mounting brackets allow for compatibility with the majority of drill press tables on the market
- Perfect for drill presses, bench tops, and work stations
- Compatible with the WEN 10 in., 12 in., 15 in. and 17 in. drill presses
- Universal design fits the majority of drill presses on the market
Additional information
| Weight | 12.12 lbs |
|---|---|
| Dimensions | 9.45 × 7.09 × 4.72 in |
| Clamping Strength (lb.) | 1900 |
| Hand Tool Type | Vise |
| Individual/Set | Individual |
| Jaw Capacity | 3.25 in |
| Material | Cast Iron |
| Model | 433TV |
| Swivel base | No |
| Throat Depth | 3.25 in |
| Tools Product Type | Hand Tool |
Reviews (16)
16 reviews for WEN 3.25 in. Industrial Strength Benchtop and Drill Press Tilting Angle Vise
Only logged in customers who have purchased this product may leave a review.
Related products
Fastening Tools
Model# RK6120
Fastening Tools
Model# TT21
Fastening Tools
Model# 480
Fastening Tools
Wilton 6 in. Mechanics Vise with Swivel Base, 4-2/16 in. Throat Depth
Model# 21500
Fastening Tools
Model# MR33C
Fastening Tools
Arrow T50 3/8 in. Leg x 3/8 in. Crown Galvanized Steel Staples (5,000-Pack)
Model# 506IP
Fastening Tools
Model# 28608
Fastening Tools
Model# HT50P
Trisha Roberts (verified owner) –
Nice vice
Alessandra Cartwright (verified owner) –
I have been using every day and this vise I have mounted it to my desktop with thumb screws so I can also use it on my drill press. This vise does everything I need perfectly.
Dave Donnelly (verified owner) –
This is a really great tilting angle vise, Its heavy enough to stay in place, when in use, it closes easily, holding whatever needs to be secure, in fact, i used it when cutting wooden dowels, it was firm, but didn’t leave any marks in the wood, Its made of industrial strength metal, that is high end, I am thinking I’ll order another just for crafts for me, otherwise I will need an appointment to use it.
Monroe Wolff (verified owner) –
So far so good, does everything I need it to do. Not sure why there’s a cotter pin to hold certain angles, since there’s a tightener that allows for infinite directionality, but I just cut it off.The vice came coated in protective grease, so be ready to get gnarly gross unpacking and making ready to use, but for the price and functionality, cannot complain.
Kane Dach (verified owner) –
Heavy duty tilting angle vise. Vise is well built but is a little heavy to pick up. Tilts from 0 to 90 degrees and can be locked in place. Angle can be pinned through predrilled holes at every 15 degrees or locking clamp between 15 degrees. There were no instructions with the vise and no instructions on the WEN or Home Depot websites. Contacted WEN and was told that instructions were being written. This is a new product for Home Depot. Has “V” grooves in one jaw to hold a cylinder but they look to be too small except for small diameter cylinders. Unit made of cast iron. It would be nice to have a ledge machined into both jaws so you could rest a piece flat. As is, you have to be careful to position the work piece before tightening. If you rest the work piece on the bottom of the jaws, you can’t drill through the piece without hitting the vise. Product description mentions removable handles but I could not find them. If you use this vise on a drill press, I’d recommend clamping or bolting the vise to drill press bed so it doesn’t move. I use it on my WEN 4214 Drill Press.
Yazmin Hammes (verified owner) –
good vise for the price. hard to find a 1 1/2 inch deep vise at this price point.
Marisa Turcotte (verified owner) –
Awesome vise it’s gonna come in handy.
Johnny Carter (verified owner) –
Well worth the money! I try to always rate things as to how they compare with other identical things in the same price range. I gave this vise the highest rating due to the fact that I believe that in this price range it cannot be beat. I used to work for a large corporation and all the tools we bought were of the highest quality and the price reflected the quality, ( probably 8 to 10 times the price of this vise) but in our industrial machine shop, the highest quality was necessary. I got this for my home shop and it will do everything I need to do here at home with my drill press being made by Craftsman and even though it is a good home use drill press, it is not the precise machine we used at work. I have this same brand of vise in a non tilting version and have been very happy with it, but the tilting feature will be a greatly appreciated.
Amelie Davis (verified owner) –
Angle drilling in my projects is the reason I’ve bought this vise. Holds workpiece sturdy I’ve added some pads to prevent marring. Good enough for me .
Linnie Leffler (verified owner) –
Great Value for the price!
Luigi Botsford (verified owner) –
Great little vise for a bench top drill press. Set ups are accurate and machining and fit is well done.
Tremayne Windler (verified owner) –
Excellent quality, especially for the price.
Salvatore Gaylord (verified owner) –
This is what I wanted
Michaela Gutmann (verified owner) –
I bought this to sharpen knives and scissors, but it doesn’t work good because the sides are too wide to use a file on an angle. The file kits the vise.
Darron Jones (verified owner) –
This vise is well-made, solid, and heavy. The pin for locking in the preset tilt angles provides positive indexing, though this makes inserting or removing the pin difficult. The angle steps seem fairly accurate, at least as can be established with a Bosch Digital Angle Finder. The clamp on the tilt provides a positive lock and the vise is useful for many applications.Unfortunately, the vise does not rotate horizontally. For me, this limits its usefulness. Also, the jaws are rather small. Jaw capacity is also limited by only being able to clamp an object that is bigger than the jaws by its base or edge, rather than centrally, as one could if the jaws were shaped like C-clamps rather than flat.I am unable to determine the intent of the statement in the description: “the removable handles help users easily install the vise into tight spaces”.
Jaclyn Crona (verified owner) –
Excellent quality, especially for the price.