WEN 3 in. Heavy-Duty Cast Iron Bench Vise with Swivel Base
$21.20
Grab an extraordinary addition to modernize your workshop without any hesitation with the assistance of this WEN HeavyDuty Cast Iron Bench Vise with Swivel Base.
In stock
Description
Remember when your bench had a vise on it? Keep your workpieces secure with the WEN 3-Inch Bench Vise. Our crosscut non-slip 3-inch jaws open up to a spacious 3-1/2 inches, keeping your workpieces perfectly still for sawing, drilling, polishing, grinding, or whatever else you need to get done. Made from heavy duty powder-coated 36,000 PSI cast iron, the WEN Bench Vise grips tightly onto your workpieces, providing over 1,850 pounds of clamping force. The swiveling base pivots over 130 degrees to meet the needs of any project, with three 12 mm mounting holes to attach to the table of your choice. Onboard 2-3/4 by 2-3/4-inch anvil helps provides metalworkers an aid for forging tools. And because its a WEN product, your bench vise comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.
- 3-inch by 3/4-inch crosscut jaws open up to 3-1/2 inches wide
- Swiveling base pivots over 130 degrees
- Constructed from heavy duty 36,000 PSI cast iron
- Over 1850 pounds of clamping force tightly secure your workpiece in place
- Features an onboard 2-3/4 by 2-3/4 inch anvil
- Sturdy design weighs in at 11.4 lbs.
- Backed by a 2-year warranty
Additional information
| Weight | 11.4 lbs |
|---|---|
| Dimensions | 10.63 × 5.51 × 5.91 in |
| Clamping Strength (lb.) | 1854 |
| Duty Rating | Heavy |
| Hand Tool Type | Vise |
| Individual/Set | Individual |
| Jaw Capacity | 3.25 in |
| Jaw Width | 3 |
| Material | Cast Iron |
| Model | 453BV |
| Swivel base | Yes |
| Throat Depth | 0.75 in |
| Tools Product Type | Hand Tool |
| Vise Type | Bench |
Reviews (67)
67 reviews for WEN 3 in. Heavy-Duty Cast Iron Bench Vise with Swivel Base
Only logged in customers who have purchased this product may leave a review.
Related products
Fastening Tools
Model# TRE550Z
Fastening Tools
Yost 6 in. High Visibility All Steel Utility Workshop Bench Vise
Model# 906-HV
Fastening Tools
DEWALT 6 in. 100 lbs. Trigger Clamp with 2.43 in. Throat Depth
Model# DWHT83139
Fastening Tools
Model# 905-AS
Fastening Tools
Model# DWHTTA7065
Fastening Tools
Model# DWHTHT450
Fastening Tools
Model# HT50P
Fastening Tools
Model# 38-604
Davonte D’Amore (verified owner) –
Well made … solid with close tolerances…
Jace Grimes (verified owner) –
This bench vice cannot be beat for the price. Good looking, functions excellent.
Krista Franecki (verified owner) –
Great vice for the money.Wish it would rotate 360 degrees.
Tyrell Powlowski (verified owner) –
Great value for the price. Have installed it but not used it yet.
Chelsey Ruecker (verified owner) –
Good little vise for the money
Jesse Schamberger (verified owner) –
Better quality for price than I expected. Really nice vise.
Crystal Toy (verified owner) –
Met expectations! Good quality!
Porter Koelpin (verified owner) –
Excellent quality, reasonable price would highly recommend this product.
Pauline Jerde (verified owner) –
Came in time.
Torrey Altenwerth (verified owner) –
Can’t beat the price for $20! Perfect size to be mounted on a roll-away toolbox!!!
Rosalee Schaden (verified owner) –
Great little vise for the money! Perfect size for what I needed. Well made.
Brennon Friesen (verified owner) –
size and quality is good for my need.
Hildegard Wisoky (verified owner) –
Good quality and very good price
Victor Cole (verified owner) –
I looked at tons of online reviews of lower price-point vises before going with WEN. Was not disappointed. The quality and fit/finish are excellent. The jaws lined-up perfectly, and this 3-in size opens just wide enough to fit a 2×4.
Lucious Mosciski (verified owner) –
Good inexpensive product.
Boyd Kreiger (verified owner) –
Sturdy and well made for a great price!
Chase Ward (verified owner) –
Exactly what we needed and wanted. Immediately put it to use.
Aron Dach (verified owner) –
A great vise for my workbench. Opens wide enough for all of my applications thus far. I wish the vise rotated more, but I mounted it on a corner to make the most of what it offers. The mounting holes are listed as 12.7mm, or 1/2 inch; use a 12mm bolt as the 12.7 does not fit in the holes.
Koby Block (verified owner) –
Very good Vice. Very sturdy. Just what i was looking for at a great price.
Sonny Bashirian (verified owner) –
Good price the perfect size for what I needed.