WEN 4 in. x 36 in. Belt and 6 in. Disc Corded Sander with Steel Base
$103.65
Enhance the beauty and strength of your floor by using WEN Belt and Disc Corded Sander with Steel Base finish.
In stock
Description
Remember when you needed a versatile and reliable sander. The WEN Steel Frame Belt Disc Sander sands, smooths and deburrs jagged edges and splinters on your wood and lumber. With a 3.2 Amp motor, users should anticipate speeds of up to 1150 ft. per minute. Changing the spacious 4 in. x 36 in. belt is a breeze, giving you the power to switch sand paper grits quickly and easily. The belt also tilts anywhere from 0° to 90° to accommodate the needs of your particular work piece. Combine this with the steel base and body for a versatile sander that makes transportation and storage easier than ever. With all of this in addition to the 6 in. side disc, you’ll have the capacity to sand whatever your heart desires. A sturdy work table accompanies the disc to provide a reliable source of support for your work pieces. This package also includes an 80-grit sanding disc, an 80-Ggrit sanding belt and a miter gauge for precise sanding on angled edges along with a stop bar for maximum belt safety and control. And because this is a WEN Product, your purchase comes backed by a 2-year warranty, a nationwide network of skilled service technicians and a helpful customer phone line all to make sure that you remember WEN.
- 2-in-1 sanding machine includes both a 4 in. x 36 in. belt and a 6 in. x 6 in. disc
- Belt tilts anywhere from 0° to 90°
- Features an open-style steel frame design
- 3.2 Amp motor provides up to 1150 FPM
- Tension release lever makes for simple changes to sandpaper grit
- Backed by a 2-year warranty
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 32.1 lbs |
|---|---|
| Dimensions | 10.20 × 19.70 × 11.44 in |
| Amperage (amps) | 3.2 |
| Maximum belt sanding speed (ft./min.) | 1150 |
| Variable Speed | No |
| Tools Product Type | Power Tool |
| Reconditioned | No |
| Power Tool Features | Lock On Switch, No Tool Belt Change |
| Portability | Bench |
| Model | 6500T |
| Minimum belt sanding speed (ft./min.) | 1150 |
| Maximum Speed (rpm) | 1780 |
| Belt length (in.) | 36 |
| Dust collection type | None |
| Disc table width (in.) | 4 |
| Disc table length (in.) | 7.5 |
| Cord Length (ft.) | 6 |
| Condition | New |
| Color Family | Black |
| Bench & Stationary Tool Type | Sander |
| Belt width (in.) | 4 |
| Voltage (volts) | 120 |
Reviews (84)
84 reviews for WEN 4 in. x 36 in. Belt and 6 in. Disc Corded Sander with Steel Base
Only logged in customers who have purchased this product may leave a review.
Related products
Sanders
Model# 382
Sanders
Model# 9924DB
Sanders
Bosch 2.5 Amp 5 in Corded Single Speed Palm Random Orbital Sander/Polisher
Model# ROS10
Sanders
Makita 3 Amp 5 in. Corded Random Orbital Sander with Variable Speed Tool Case
Model# BO5031K
Sanders
Model# 6101-6
Dan Willms (verified owner) –
Great tool works well. It’s easier to change the belt then several other models that I checked out before selecting the WEN machine. It’s very easy to set up and adjust the belt and disk. The belt sander angle is easy to adjust to any position that you need. All and all, I would say this is a very nice machine for the price.
Freddy Bergstrom (verified owner) –
Easy to set up. Great for small projects.
Name Fisher (verified owner) –
This sanding machine is great. I should have had it years ago.i use it for wood carving.it is just the right size.has plenty of power.Great machine
Vivien Mayert (verified owner) –
The only problem so far is you can not bolt it down .
Joey Stark (verified owner) –
The Wen 4 in. x 36 in. belt and 6 in. disc corded sander is ideal for what I needed it for. The tilting table is a nice feature and it can be relocated to the belt side as well. The belt sander is great and it can be pivoted 90 degrees to a vertical position, you can also lock it into position between 0 and 90 degrees. The only negative I’ve experienced so far is it take a bit of time to straighten out the alignment of the belt if it’s off. When I first got it it was off-center by about 1/2″ and when I would center it up it would run back to the right, then I over-corrected it and it ran back to the left. About 5-10 minutes later I had it right on but it was a bit unnerving for most of that time.
Abelardo VonRueden (verified owner) –
Works Great.Great Value.Well Satisfied with this purchase.
Frankie Bergstrom (verified owner) –
So far – So good.
Wendell Terry (verified owner) –
Sanding disc table a little small for bigger cuts of wood but if careful should work ok.
Nickolas Treutel (verified owner) –
Fit our needs very well.
Heidi Lakin (verified owner) –
A very useful addition to my shop tools
Michele Metz (verified owner) –
Great sander for the money. The only negative so far is the slop in the miter table and gauge. I will shim up the slider with some silver tape and it should be snug enough for my purposes. If you need a high precision sander, you will need to spend a lot more money. It is still a good sander for a good price.
Clotilde Collins (verified owner) –
round sandpaper didn’t stick. replaced with new one and it works fine. Good value.
Katarina Huel (verified owner) –
Efficient. Very easy to set up and use. Easy changing of belts is a definite plus.
Dayna Hodkiewicz (verified owner) –
Worked as expected
Therese Stokes (verified owner) –
Easy assembly, Has nice power cord. Loosen a couple bolts to rotate the belt sander. Motor doesn’t bog down unless it’s a heavy load.
Nathen Swaniawski (verified owner) –
Only used a few times but setup went really easy. The sandpaper that comes with is good and aggressive. Tool rest is decent. Toss the miter gauge as it is pretty much worthless but I’ve never used one on a sander before. Overall great value for the price
Pedro Klocko (verified owner) –
Love it!
Brennon Schinner (verified owner) –
Solid starter piece of equipment. Good value for the money. As long as you’re not reefing on it, pushing too hard, or trying to do too much on it, you’ll be set.
Carson Schowalter (verified owner) –
Perfact for my small shop, if you stall this machine your pushing to hard, use a more aggresive grit or be a little more patient. The only reason i gave 4 stars instead of five, is because there is no dust control, but i can add something.
Vada Fahey (verified owner) –
I haven’t used this sander for much yet, but so far it is good. Easy to set up, went straight to work. The 80 grit belts it came with hold u p under a bit of light work on native hardwoods.It is also easy to adjust the angle of the different parts. Time will tell if it holds up.